So now by changing these files again, i’m can enter my passphrase but
ERROR: Unable to find root device ''.is still coming up !
Here is my new gummiboot config
title Antergos linux /vmlinuz-linux initrd /initramfs-linux.img options cryptdevice=UUID=4deafd57-3871-4022-9d01-60885395d5f0:cryptAntergos root=/dev/mapper/cryptAntergos rw quiet acpi_osi="!Windows 2013" acpi_osi="!Windows 2012" acpi_backlight=vendor
And here is my HOOKS line :
HOOKS="base udev autodetect modconf block keyboard keymap encrypt filesystems"
I’ll continue to try fixing it, but if somebody find the problem i’ll be grateful :)
Here is my
title Antergos linux /vmlinuz-linux options initrd=/initramfs-linux.img acpi_osi="!Windows 2013" acpi_osi="!Windows 2012" acpi_backlight=vendor cryptdevice=UUID=4deafd57-3871-4022-9d01-60885395d5f0:cryptAntergos root=/dev/mapper/luks-4deafd57-3871-4022-9d01-60885395d5f0 rw quiet
And here is my
# vim:set ft=sh # MODULES # The following modules are loaded before any boot hooks are # run. Advanced users may wish to specify all system modules # in this array. For instance: # MODULES="piix ide_disk reiserfs" MODULES="dm_mod dm_crypt ext4 aes_x86_64 sha256 sha512" # BINARIES # This setting includes any additional binaries a given user may # wish into the CPIO image. This is run last, so it may be used to # override the actual binaries included by a given hook # BINARIES are dependency parsed, so you may safely ignore libraries BINARIES="" # FILES # This setting is similar to BINARIES above, however, files are added # as-is and are not parsed in any way. This is useful for config files. FILES="" # HOOKS # This is the most important setting in this file. The HOOKS control the # modules and scripts added to the image, and what happens at boot time. # Order is important, and it is recommended that you do not change the # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for # help on a given hook. # 'base' is _required_ unless you know precisely what you are doing. # 'udev' is _required_ in order to automatically load modules # 'filesystems' is _required_ unless you specify your fs modules in MODULES # Examples: ## This setup specifies all modules in the MODULES setting above. ## No raid, lvm2, or encrypted root is needed. # HOOKS="base" # ## This setup will autodetect all modules for your system and should ## work as a sane default # HOOKS="base udev autodetect block filesystems" # ## This setup will generate a 'full' image which supports most systems. ## No autodetection is done. # HOOKS="base udev block filesystems" # ## This setup assembles a pata mdadm array with an encrypted root FS. ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. # HOOKS="base udev block mdadm encrypt filesystems" # ## This setup loads an lvm2 volume group on a usb device. # HOOKS="base udev block lvm2 filesystems" # ## NOTE: If you have /usr on a separate partition, you MUST include the # usr, fsck and shutdown hooks. HOOKS="base udev autodetect modconf block keyboard keymap encrypt filesystems fsck" # COMPRESSION # Use this to compress the initramfs image. By default, gzip compression # is used. Use 'cat' to create an uncompressed image. #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION="lz4" # COMPRESSION_OPTIONS # Additional options for the compressor #COMPRESSION_OPTIONS=""
Any idea ? Thanks :)
And I forgot, here’s my disk
Model: ATA AXNS381E-128GM-B (scsi) Disk /dev/sda: 128GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 1049kB 269MB 268MB fat32 ANTERGOS_BOOT boot, esp 2 269MB 124GB 124GB ANTERGOS_ROOT 3 124GB 128GB 4053MB linux-swap(v1) ANTERGOS_SWAP
My install was working pretty fine until I changed gummiboot config file and mkinitcpio.conf
Here’s what happens when I boot
[0.026367] Ignoring BGRT: invalid status 0 (expected 1) :: running early hook [udev] starting version 224 :: running hook [udev] :: Triggering uevents... :: running hook [keymap] :: Loading keymap...done. :: running hook [encrypt] ERROR: device '' not found. Skipping fsck. ERROR: Unable to find root device ''. You are being dropped to a recovery shell Type 'exit' ... sh: can't access tty: job control turned off
Both the configuration file (gummiboot and mkinitcpio) are coming, just have to boot on the liveUSB
Hey, I just installed Antergos with Gnome on my HP Spectre x360.
I had some problems with lightDM ( black screen when reopening my lid, and the only solution was a hard reboot) so I switched to GDM, but unfortunately I got the same problem except this time I see the GDM login page but I can neither control the mouse nor the keyboard ( hard reboot is the only solution as well)
Any clue ? Thanks !