Thank you for the clearer picture.
Have you made sure to disable fast boot in Windows? If you are using UEFI for Windows, are you using the same for Antergos? (same thing applies to BIOS).
Hope this helps!
UEFI is enabled in BIOS but Legacy boots first according to the settings:
I just got Antergos installed now, no way to enter Windows :(
Without deeper search i can see ACPI errors:
dmesg | grep acpi
May you need to load the thinkpad-acpi module:
sudo modprobe thinkpad-acpi
[[email protected] ~]$ dmesg | grep acpi [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.909796] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.953929] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1) [ 0.961999] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.962262] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.962376] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.962380] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.962384] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.962387] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 1.007100] acpiphp: Slot  registered [ 1.048656] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.860955] acpi device:0d: hash matches [ 4.730403] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 4.730405] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.730405] thinkpad_acpi: ThinkPad BIOS GMET78WW (2.26 ), EC unknown [ 4.730406] thinkpad_acpi: Lenovo ThinkPad T540p, model 20BE00B8GE [ 4.734076] thinkpad_acpi: radio switch found; radios are enabled [ 4.734194] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.734195] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.740317] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.741071] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 4.771432] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 16.707194] thinkpad_acpi: EC reports that Thermal Table has changed [ 25.016672] thinkpad_acpi: EC reports that Thermal Table has changed
Modprobe didn’t help. :/
I got some minor problems while booting to any linux distribution (Windows is fine, just checked to find out if it’s a hardware problem).
It’s hard to describe the problems so I just filmed them using my phone:
And the error you can see at the end:
As soon as it loaded the login screen, everything is kinda fine. No problem I realized so far.
What I did so far:
- Updated BIOS in March this year, there’s no newer version until now
- Tried many different distributions - Same problem everywhere
- Tried Windows to check if it’s a hardware related problem - Windows works fine
I’m currently running the Nouveau Drivers if that’s any help, not sure.
Thanks in advance. :)
Probably my Xorg.0.log.old helps. That’s actually the only log I could see and only the end of it looks strange.
And it looked like this after it comes back from the black screen. But it doesn’t always look like this.
Only a hard reset helps to be able to click something again.
I just installed Antergos today and wanted to try it intensively. My first problems with screen tearing have been solved in IRC but I’m unable to get this problem solved in IRC cause I’m unable to answer after a while.
From time to time the screen turns black for a few seconds and then is back, but every element hung up except the cursor. I can move the cursor around but nothing reacts on clicks.