@pseudonym A lots of timeouts is not normal output and
dmesgno change after insertion could mean that there is something wrong with the port or since power on the device is hanging, is there any other warning or error messages in your
dmesgoutputs I noticed a warning about ehci_hcd module which says:
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Causing some other errors:
pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 78473 usecs pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 71414 usecs pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c6 took 71438 usecs pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6c6 took 71602 usecs QUIRK: Enable AMD PLL fix
Where I can find the modules list and reorder to not make my system “quirk”?
I’m getting this error on my dmesg output:
x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
My CPU is an AMD FX8350, being an AMD CPU the microcode comes inside the
linux-firmwarepackage and as everybody knows, all motherboards of same era is EOL, so no more BIOS updates, my questions are:
- Is there any way to load the AMD microcode earlier and how could I do that?
- This could be considered an upstream bug?
Your drivers seems normal.
dmesgbefore insert the card then after insert the card can give some idea of what is wrong;
If no system reaction on
dmesgsometimes can be something stuck in the card reader slot like dust bunny or hair;
A lots of GUI based programs it just locked by design to NOT run as root;
Messing with file permissions will render a dead system as it seems your not familiar with *nix based systems;
Not being a programmer, any copy/paste script can be a hook to well deigned malware turning your rig a zombie for some botnet or mining cryptocurrency for someone else;
As @just said it’s feasible but be prepared to be a Bear Grylls for your rig as everything can go wrong depending on your knowledge level of *nix based programs.
I just built from AUR and set my theme to Adapta (my prefered is Adapta-Nokto) and look like this, but since I never learned CAD this is what I’ve got
It’s strange that doesn’t work for you, but I’m glad that you found a workaround .
For Eagle I think I can’t help, I built successfully from AUR but I don’t have any account to proceed
Hmmmm… After reading again your posts, did you tried to genarate an image from your Windows disk and tried to run from it? I know that is a shoot in the dark but after removing all passthrough devices the disk could be out of sync as the partition drivers fails to read and write hard locking the system.
Also iommu trees must be entirely passed to guest machines, passing one device can cause instabilities, to get your iommu group information I found a script on Gentoo wiki (https://wiki.installgentoo.com/index.php/PCI_passthrough) that collects information needed:
for iommu_group in $(find /sys/kernel/iommu_groups/ -maxdepth 1 -mindepth 1 -type d); do echo "IOMMU group $(basename "$iommu_group")"; for device in $(ls -1 "$iommu_group"/devices/); do echo -n $'\t'; lspci -nns "$device"; done; done
And also I found some information about nvidia in guests that if the driver detects that is inside of a vm will disable itself here: https://davidyat.es/2016/09/08/gpu-passthrough/
@quimkaos You and your logs don’t describe your rig, debugging software without hardware it’s almost impossible tell us what cpu, ram and graphics card please.
Sometimes the problem is hidden in something else, like yesterday, my wife ancient PC had a crash with openSUSE Tumbleweed software updater and gnome with xorg with discret radeon graphics stopped work giving garbled graphics and constant freezing falling back to gdm, the system was usable with wayland but had no video acceleration in browser, so, no way to watch youtube and similars, having that I convinced her to move to same distro as me turning my work more simple but after installing Antergos I got similar behaviour then I took about 2 hours to discover that the
xf86-video-atiwas the culprit, removing it was my solution but I installed
xf86-video-amdgpuas backup since there is no full documentation where one begins and ends when radeon driver is on, the only thing that I really know is that ati driver carries microcodes which I suppose that the compatible ones overwrites same address space causing the graphics card ring 0 to stall.
Well, as I said software depends on hardware, having that in mind
journalctloutputs can help to find the root of problem, so, more information here and more heads to think we can figure out together.
can this be related to the recent nvidia issues? i’m asking because none of my other Antergos machines, that don’t have nvidia, diden’t had any of this kind of issues…
I needed the desktop back so I just reinstalled keeping my home and data folder and everything is okay now. For the record I use Wayland.
Which graphics card is yours?
If Nvidia I tried last year run wayland with nouveau but there is a lots of instabilities I would rather use nvidia with Xorg.
As I am a free/libre open source lover I ditched my last nvidia card, I couldn’t stand with all their policies, closing more and more, they can be superior in “horsepower” but it seems that they don’t take linuxers seriously, BTW Intel and AMD now is more friendly than ever and possibly 2019 we will see some better graphics card from Intel
As any guest system depends on some other services or files, in rolling release distro environment will break often, check pamac (updater and software manager) log for what was updated before broke.
journalctl -b0say somenthing after vm crash?
In my computer I had in journalctl this output:
systemd: Failed to start Network Manager. systemd: NetworkManager.service: Failed with result 'exit-code'. systemd: NetworkManager.service: Main process exited, code=exited, status=127/n/a NetworkManager: /usr/bin/NetworkManager: error while loading shared libraries: libpsl.so.6: cannot open shared object file: No such file or directory
Being a library mostly will be inside
/usr/libfolder, I went there and checked if there’s any
libpslinside and voilá there was.
As there wasn’t any
libpsl.so.6I just symlinked to the
sudo ln -s /usr/lib/libpsl.so /usr/lib/libpsl.so.6
Sorry for late answer I was very busy lately but I’m glad that you figured out the solution.
kernel: usbhid 3-3:1.2: couldn't find an input interrupt endpoint
Some usb devices doesn’t send endpoints correctly in usb protocol, is not an error it’s just warning :)
systemd-modules-load: Failed to find module 'v4l2loopback_dc' systemd: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE systemd: systemd-modules-load.service: Failed with result 'exit-code'. systemd: Failed to start Load Kernel Modules.
V4L2 stands for Video for Linux version 2 and its loopback more info here https://github.com/umlaeute/v4l2loopback
In the grub boot menu press
ethen in line started with
linuxput a number
3at the end of line then press
F10. This number means system init level (runlevel),
1is single user mode,
2is multi user,
3is multi user with network,
4is multi user with display manager,
5is not used but the behavior is set to the same as 3 and
I hope this help you :)
@edwin-foss I’ve installed cinnamon and / works fine
Oh, well, still totally odd thing but probably it’s too late to find what is causing this behavior as this month gnome will be upgraded to 3.28…
Anyway, all information wasn’t enough and I was unable to identify where is the root problem so my curiosity will be dying because of it but every post contains a little lessons about some parts system guts, next time could be you helping someone else to fix a problem and when the times comes on the Kraken err I mean Gnome 3.28 will be released.
Thanks for you patience,
The gdm directory didn’t exists and xsession-errors is empty
After all information still nothing shows what is triggering the strange behavior, as I said before the only thing that we are sure is that happens only in your Gnome…
Does it appear any error in gnome looking glass?
(Alt+F2 then type lg then enter. There will be 3 or more tabs right aligned, if “Error” tab is shown copy what is inside and post here, also trigger the key event to see if display an error too)
Could you also provide these things?
1- What is inside your
setxkbmap -print -verbose 10command output;
4- What is inside your
5- What is inside your
About digging up more information I found this two threads but I recommend neither, both are 2 years old.
If you want, be free to read.
Ah!! Nothing much related but there are some brave warriors trying to bring an application to control rgb and other things for corsair keyboards, more info here https://github.com/ckb-next/ckb-next.