I have been trying to download some packages (mongodb, mongodb-tools) for some while (I am attempting every few days to check if the URL could be resolved).
I am getting this error:
failed retrieving file 'mongodb-tools-4.0.0-2-x86_64.pkg.tar.xz' from mirror.wdc1.us.leaseweb.net : The requested URL returned error: 404 Not Found
Any alternatives to download the packages?
Update: It’s just
@joekamprad Okay now I am stuck in between -_-
For installing bublebee, I tried both the (automated?) way of the nvidia-installer package and the step-by-step method of
https://antergos.com/wiki/hardware/bumblebee-for-nvidia-optimus/. My BIOS doesn’t offer any display configuration options by the way.
Both ways completed without issues but still the only marker on the display
Restoring nouveau option didn’t work either -_-
I will post the errors soon.
@ahassoun do you try setup with nvidia-settings ?
I do have some screwed shit around Multimonitor setup on Nvidia graphics…
I do use a script to set them up for lightdm (xrandr command)
Does it mean I will struggle with this setup forever?
Here’s what I got with nvidia-settings GUI tool. DELL is the external display by the way.
Hello again! I have an update and a super strange issue now
I saw a Kernel update available (4.17.10) along with some Nvidia packages so I proceeded with a full upgrade, and rebooted, and I was surprised that the external screen is now working.
The strange thing now is that the laptop screen no longer works. Only external.
- I started with toggling external screen settings (left, right, primary only, external only, unify, etc).
- When I reboot, the booting options are displayed on the laptop display.
- Once Antergos is loaded, the login screen is displayed on the external display only.
- I tried rebooting with the external screen disconnected but the laptop screen didn’t work at all
- On the laptop screen only a still (not blinking) marker displayed.
- If I went to CLI (CTRL+ALT+F2), the CLI is displayed on the laptop screen.
Output of xrandr and lshw
[[email protected] ahassoun]# xrandr Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.00*+ 1280x1024 75.02 60.02 1152x864 75.00 1024x768 75.03 60.00 800x600 75.00 60.32 640x480 75.00 59.94 DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis)
[[email protected] ahassoun]# lshw -c video *-display description: VGA compatible controller product: GP106M [GeForce GTX 1060 Mobile] vendor: NVIDIA Corporation physical id: 0 bus info: [email protected]:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:142 memory:a3000000-a3ffffff memory:90000000-9fffffff memory:a0000000-a1ffffff ioport:4000(size=128) memory:a4000000-a407ffff *-display description: VGA compatible controller product: Intel Corporation vendor: Intel Corporation physical id: 2 bus info: [email protected]:00:02.0 version: 04 width: 64 bits clock: 33MHz capabilities: pciexpress msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:140 memory:a2000000-a2ffffff memory:b0000000-bfffffff ioport:5000(size=64) memory:c0000-dffff
@stingray454 Thanks for your reply.
[[email protected] ahassoun]# lshw -c video *-display UNCLAIMED description: VGA compatible controller product: GP106M [GeForce GTX 1060 Mobile] vendor: NVIDIA Corporation physical id: 0 bus info: [email protected]:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list configuration: latency=0 resources: memory:a3000000-a3ffffff memory:90000000-9fffffff memory:a0000000-a1ffffff ioport:4000(size=128) memory:a4000000-a407ffff *-display description: VGA compatible controller product: Intel Corporation vendor: Intel Corporation physical id: 2 bus info: [email protected]:00:02.0 version: 04 width: 64 bits clock: 33MHz capabilities: pciexpress msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:140 memory:a2000000-a2ffffff memory:b0000000-bfffffff ioport:5000(size=64) memory:c0000-dffff
Back to my system now!
Wired or wireless network?
It was wireless. My bad - I should have tried a wired connection before I ask. It worked with the wired connection and I ran the nouveau option and it worked. I am wondering how the system was able to install the package (after being removed) when there was no connection?
Thanks for your time and help!
@joekamprad Thanks for your attention.
I have guessed so and I have tried it before removing the package but it threw errors (I don’t remember them though).
Now I have tried again. Installing the package succeeded, but the nouveau option didn’t work. It gave errors about multilib file can’t be retrieved because hostnames can’t be resolved.
I have tried pinging google.com and it also failed.
Okay I tried the
nvidia-installerpackage, is explained here:
But I ran myself into more issues :D
I started with testing
nvidia-installer -tfirst and after it was all green I went for the installation and it succeeds. After the reboot, the Desktop Manager no longer works and only a black screen with a marker are displayed.
I used tty2 and tried
-nbut none could complete so I removed the package and reboot but still stuck on that black screen.
The same hardware was working fine (Plug & Play without any configuration) but I stopped using the screen for a while (and many Kernel updates were done).
Now the screen is not working and even
xrandris not showing it.
Laptop: LENOVO Legion Y520
00:02.0 VGA compatible controller : Intel Corporation Device [8086:591b] (rev 04) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller : NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] [10de:1c20] (rev a1) (prog-if 00 [VGA controller])
System version: Antergos Linux 18.4-ISO-Rolling
Kernel: Linux 4.17.6
(Same issue with LTS)
Desktop Environment: KDE
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1920x1080 60.02*+ 60.01 59.97 59.96 59.93 1680x1050 59.95 59.88 1400x1050 59.98 1600x900 59.99 59.94 59.95 59.82 1280x1024 60.02 1400x900 59.96 59.88 1280x960 60.00 1440x810 60.00 59.97 1368x768 59.88 59.85 1280x800 59.99 59.97 59.81 59.91 1280x720 60.00 59.99 59.86 59.74 1024x768 60.04 60.00 960x720 60.00 928x696 60.05 896x672 60.01 1024x576 59.95 59.96 59.90 59.82 960x600 59.93 60.00 960x540 59.96 59.99 59.63 59.82 800x600 60.00 60.32 56.25 840x525 60.01 59.88 864x486 59.92 59.57 700x525 59.98 800x450 59.95 59.82 640x512 60.02 700x450 59.96 59.88 640x480 60.00 59.94 720x405 59.51 58.99 684x384 59.88 59.85 640x400 59.88 59.98 640x360 59.86 59.83 59.84 59.32 512x384 60.00 512x288 60.00 59.92 480x270 59.63 59.82 400x300 60.32 56.34 432x243 59.92 59.57 320x240 60.05 360x202 59.51 59.13 320x180 59.84 59.32
The screen is VGA but the laptop is HDMI and there’s an adaptor in between (same setup wored fine previously).
What else should I check?
Your time is really appreciated! Thanks in advance.
Thanks @joekamprad ,
/etc/fstabwas already edited.
I jused edited
/etc/mkinitcpio.confand added the hooks, rebuilt (without errors), rebooted, but didn’t work.
I noticed this line in my
HOOKS="base udev autodetect modconf block keyboard keymap filesystems fsck"
It was already there. Do I need to remove it? Or maybe just add resume to it?
This solved both 1 & 3. However ‘Plasma’ is still written in Arabic but it’s not a big deal.
Beside this, I would really appreciate if you could have a look at my issue here: https://forum.antergos.com/topic/9713/hibernation-doesn-t-function-properly
Initially my system language was Arabic by default (could be because of the region settings). I removed Arabic from Languages and from Formats. Yet, some areas are displayed/written in Arabic:
- Date and Time on Login screen
- “Plasma” name on Login screen (On the drop down menu)
- All Pacman messages, prompts, alerts, etc.
The rest of the system is correctly showing English.
Where can I check/update those? Arabic doesn’t appear anywhere in my settings.
[[email protected] ~]$ swapon --show NAME TYPE SIZE USED PRIO /swapfile file 18G 0B -2 [[email protected] ahassoun]# filefrag -v /swapfile Filesystem type is: ef53 File size of /swapfile is 19327352832 (4718592 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 0: 5711872.. 5711872: 1: 1: 1.. 30719: 5711873.. 5742591: 30719: unwritten 2: 30720.. 55295: 5742592.. 5767167: 24576: unwritten [[email protected] ahassoun]# df -T /swapfile Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/nvme0n1p4 ext4 140345676 49002560 89890248 36% /
I have done the following:
- Creating swap file on /swapfile with 19GB size
- Updated my kernel, added these 2 parameters:
- Applied changes using grub-mkconfig
Now I see the option of hibernation, but when I click on it, it just behaivs like ‘Switch User’. Takes me to login screen and the screen remains on.
Solved :) by editing modprobe.d/blacklist.conf
I now can see available wifi networks. Although I am still unable to access web but could be issue with my network. Will troubleshoot this later but at least I can see the networks now
Unfortunately it didn’t fix, here’s output of info commands:
[[email protected] ahassoun]# modinfo -p iwlwifi debug:debug output mask (uint) swcrypto:using crypto in software (default 0 [hardware]) (int) 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0) (int) fw_restart:restart firmware in case of error (default true) (bool) antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int) nvm_file:NVM file name (charp) d0i3_disable:disable d0i3 functionality (default: Y) (bool) lar_disable:disable LAR functionality (default: N) (bool) uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint) bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) power_save:enable WiFi power management (default: disable) (bool) power_level:default power save level (range from 1 - 5, default: 1) (int) fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool) d0i3_timeout:Timeout to D0i3 entry when idle (ms) (uint) disable_11ac:Disable VHT capabilities (default: false) (bool) [[email protected] ahassoun]# modprobe iwlwifi 11n_disable=1 Module = "iwlwifi" Attributes: coresize = "315392" initsize = "0" initstate = "live" refcnt = "1" srcversion = "CFFF5C162A83F2977E03473" taint = "" uevent = <store method only> Parameters: 11n_disable = "1" amsdu_size = "0" antenna_coupling = "0" bt_coex_active = "Y" d0i3_disable = "Y" d0i3_timeout = "1000" debug = "0" disable_11ac = "N" fw_monitor = "N" fw_restart = "Y" lar_disable = "N" led_mode = "0" nvm_file = "(null)" power_level = "0" power_save = "N" swcrypto = "0" uapsd_disable = "3" Sections: .altinstr_replacement= "0x0000000048453024" .altinstructions = "0x0000000076b1faa3" .bss = "0x00000000c856564d" .data.once = "0x0000000058e3dd9b" .data = "0x00000000c24eadb8" .exit.text = "0x000000005a8ed0f6" .gnu.linkonce.this_module= "0x000000009d0e1105" .init.text = "0x000000000f96400d" .note.gnu.build-id = "0x00000000a78d386f" .orc_unwind = "0x000000001083f141" .orc_unwind_ip = "0x000000001b7f5720" .parainstructions = "0x00000000a5a5311c" .ref.data = "0x000000007e1bdd03" .rodata.str1.1 = "0x000000009eba2238" .rodata.str1.8 = "0x0000000064162221" .rodata = "0x00000000203a13f0" .smp_locks = "0x0000000023c56800" .strtab = "0x00000000ec4c9067" .symtab = "0x00000000b13e57d1" .text = "0x0000000025591987" __bug_table = "0x000000001e8e040e" __jump_table = "0x00000000ea00455e" __kcrctab = "0x00000000d2811339" __kcrctab_gpl = "0x00000000e4424fba" __ksymtab_gpl = "0x000000003a555e11" __ksymtab_strings = "0x00000000726ce24d" __ksymtab = "0x000000008db1779b" __mcount_loc = "0x00000000228fd33e" __param = "0x000000003eca404f" __tracepoints_ptrs = "0x00000000a127abd6" __tracepoints = "0x000000008b6f0800" __tracepoints_strings= "0x00000000567e5852" _ftrace_events = "0x000000005125bfbf"