• No event sounds


    I have installed Antergos with GNOME desktop at first everything worked fine, but after trying to customize some stuff I think i broke something.
    If I go to settings>sound>output and click test speakers there is no sound or when I change the volume before there was a sound now there isn’t.
    Sorry for explaining in such a weird way

  • The sound normally works while watching videos, or listening to music

  • When you go to Settings>sound are the speakers highlighted as output devices?

  • inxi -Fxxx0

    lspci -K

    ?

  • when I go to settings>sound yes speakers are highlited as output devices
    inxi is not recognized as a command
    and lspci -K shows how to use the lspci command
    also as I said only notifications (alert sound) doesn’t work

  • nevermind the k in lspci -k shouldn’t be capital

    //00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
    	Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
    	Kernel driver in use: skl_uncore
    00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
    	Subsystem: Hewlett-Packard Company Skylake GT2 [HD Graphics 520]
    	Kernel driver in use: i915
    	Kernel modules: i915
    00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)
    	Subsystem: Hewlett-Packard Company Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
    	Kernel driver in use: proc_thermal
    	Kernel modules: processor_thermal_device
    00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP USB 3.0 xHCI Controller
    	Kernel driver in use: xhci_hcd
    	Kernel modules: xhci_pci
    00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP Thermal subsystem
    	Kernel driver in use: intel_pch_thermal
    	Kernel modules: intel_pch_thermal
    00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP CSME HECI
    	Kernel driver in use: mei_me
    	Kernel modules: mei_me
    00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP SATA Controller [AHCI mode]
    	Kernel driver in use: ahci
    	Kernel modules: ahci
    00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
    	Kernel driver in use: pcieport
    	Kernel modules: shpchp
    00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP LPC Controller
    00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP PMC
    00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP HD Audio
    	Kernel driver in use: snd_hda_intel
    	Kernel modules: snd_hda_intel, snd_soc_skl
    00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
    	Subsystem: Hewlett-Packard Company Sunrise Point-LP SMBus
    	Kernel driver in use: i801_smbus
    	Kernel modules: i2c_i801
    01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev ff)
    	Kernel modules: nouveau, nvidia_drm, nvidia
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
    	Subsystem: Hewlett-Packard Company RTS522A PCI Express Card Reader
    	Kernel driver in use: rtsx_pci
    	Kernel modules: rtsx_pci
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
    	Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter
    	Kernel driver in use: rtl8723be
    	Kernel modules: rtl8723be
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 0a)
    	Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller
    	Kernel driver in use: r8169
    	Kernel modules: r8169
    
    
  • @tcreeper said in No event sounds:

    inxi no se reconoce como un comando

    yaourt -S inxi

    lspci -K muestra cómo usar el comando lspci

    lspci -k (It was so hard to try in minuscule …)

  • inxi -Fxxx0 will show

    System:
      Host: hp-pavilion Kernel: 4.16.9-1-ARCH x86_64 bits: 64 compiler: gcc 
      v: 8.1.0 Desktop: Gnome 3.28.2 info: gnome-shell dm: lightdm 1.26.0 
      Distro: Antergos Linux 
    Machine:
      Type: Laptop System: HP product: HP Pavilion Notebook 
      v: Type1ProductConfigId serial: <root required> Chassis: type: 10 
      serial: <root required> 
      Mobo: HP model: 80A4 v: 91.1E serial: <root required> UEFI: Insyde v: F.82 
      date: 08/18/2016 
    CPU:
      Topology: Dual Core model: Intel Core i5-6200U bits: 64 type: MT MCP 
      arch: Skylake rev: 3 L2 cache: 3072 KiB 
      flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 19204 
      Speed: 500 MHz min/max: 400/2800 MHz Core speeds (MHz): 1: 500 2: 500 
      3: 500 4: 500 
    Graphics:
      Card-1: Intel HD Graphics 520 driver: i915 v: kernel bus ID: 00:02.0 
      chip ID: 8086:1916 
      Card-2: NVIDIA GM108M [GeForce 940M] driver: N/A bus ID: 01:00.0 
      chip ID: 10de:1347 
      Display: x11 server: X.Org 1.20.0 driver: modesetting 
      unloaded: fbdev,intel,vesa compositor: gnome-shell 
      resolution: 1366x768~60Hz 
      OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Skylake GT2) 
      v: 4.5 Mesa 18.0.4 compat-v: 3.0 direct render: Yes 
    Audio:
      Card-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel v: kernel 
      bus ID: 00:1f.3 chip ID: 8086:9d70 
      Sound Server: ALSA v: k4.16.9-1-ARCH 
    Network:
      Card-1: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be 
      v: kernel port: 4000 bus ID: 03:00.0 chip ID: 10ec:b723 
      IF: wlo1 state: up mac: 68:14:01:6e:51:6b 
      Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet 
      driver: r8169 v: 2.3LK-NAPI port: 3000 bus ID: 04:00.0 chip ID: 10ec:8136 
      IF: eno1 state: down mac: a0:8c:fd:23:1f:23 
    Drives:
      HDD Total Size: 931.51 GiB used: 15.05 GiB (1.6%) 
      ID-1: /dev/sda vendor: Western Digital model: WD10JPVX-60JC3T0 
      size: 931.51 GiB serial: WD-WXM1EA500L0N rev: 1A01 scheme: GPT 
    Partition:
      ID-1: / size: 87.50 GiB used: 14.98 GiB (17.1%) fs: ext4 dev: /dev/sda6 
      ID-2: swap-1 size: 7.26 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda7 
    Sensors:
      System Temperatures: cpu: 43.5 C mobo: N/A 
      Fan Speeds (RPM): N/A 
    Info:
      Processes: 202 Uptime: 1h 46m Memory: 7.64 GiB used: 2.05 GiB (26.8%) 
      Init: systemd v: 238 Compilers: gcc: 8.1.0 clang: 6.0.0 Shell: bash 
      v: 4.4.19 running in: gnome-terminal inxi: 3.0.09 
    
  • Try with kernel 4.14 lts and test with a jack earhpones…

  • I tried lts kernel…
    It’s the same thing.
    Sound works, notifications, alerts don’t.
    I don’t think you (anyone answering) know what my problem is…
    The sound WORKS, notifications and alert sounds do not (or any other system sound)

  • @tcreeper said in No event sounds:

    I don’t think you (anyone answering) know what my problem is…
    The sound WORKS, notifications and alert sounds do not (or any other system sound)

    but after trying to customize some stuff I think i broke something

    Hi!
    Not the best help from me, but it seems you disabled it somewhere. Since i don’t use Gnome i suggest you try to remake your steps from “trying to customize some stuff” and see if you can find the issue. Maybe it’s only a switch for enabling sound effects.

    Portergos site
    https://github.com/Portergos/portergos-iso

    Still in love with Antergos (default OS)
    I3wm

    Linux newbie since 06/2016

  • @fernandomaroto said in No event sounds:

    but after trying to customize some stuff I think i broke something

    Hi!
    Not the best help from me, but it seems you disabled it somewhere. Since i don’t use Gnome i suggest you try to remake your steps from “trying to customize some stuff” and see if you can find the issue. Maybe it’s only a switch for enabling sound effects.

    More than sure, it’s like that.

  • The moment I clicked another alert sound every other system sound failed.

    But umm I am just going to get rid of GNOME.

  • Okay, I’m just trying to help: You wrote that the speakers are high lighted, but I’m going to ask the obvious here, is system notifications turned on? You can find it in the menu that follows speakers (in the sound menu)

    KDE/XFCE/i3-WM

    Everybody is a genius, but if you judge a fish by its ability to climb a tree, it will live its whole life believing its stupid.

  • Yep, they were turned on.
    Changing the desktop didn’t work either BUT
    I deleted and re created the user and now it is working
    The moment I change the alert sound everything stops working.
    Thanks for anyone that tried to help.

sounds2 event2 Posts 15Views 342
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.