• Freeze and reboot

    I have experienced freeze and reboot with my fresh Antergos install. What can I do to track the problem?

    System:    Host: datorn Kernel: 4.14.9-1-ARCH x86_64 bits: 64 gcc: 7.2.1
               Desktop: Gnome 3.26.2 (Gtk 3.22.26) dm: lightdm
               Distro: Antergos Linux
    Machine:   Device: desktop System: Gigabyte product: AB350M-HD3 serial: N/A
               Mobo: Gigabyte model: AB350M-HD3-CF serial: N/A
               UEFI: American Megatrends v: F4 date: 08/24/2017
    Battery    hidpp__0: charge: N/A condition: NA/NA Wh volts: NA
               model: Logitech Wireless Mouse M325 serial: 400a-95-be-c0-1a status: Discharging
    CPU:       Quad core AMD Ryzen 5 1500X (-MT-MCP-) 
               arch: Zen rev.1 cache: 2048 KB
               flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 27959
               clock speeds: min/max: 1550/3500 MHz 1: 1550 MHz 2: 1550 MHz
               3: 1550 MHz 4: 1550 MHz 5: 1550 MHz 6: 3500 MHz 7: 1550 MHz
               8: 1550 MHz
    Graphics:  Card: Advanced Micro Devices [AMD/ATI] Baffin [Radeon RX 560]
               bus-ID: 09:00.0 chip-ID: 1002:67ff
               Display Server: x11 (X.Org 1.19.6 )
               drivers: modesetting (unloaded: fbdev,vesa)
               Resolution: [email protected]
               OpenGL: renderer: Radeon RX 560 Series (POLARIS11 / DRM 3.19.0 / 4.14.9-1-ARCH, LLVM 5.0.1)
               version: 4.5 Mesa 17.3.1 (compat-v: 3.0) Direct Render: Yes
    Audio:     Card-1 Advanced Micro Devices [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
               driver: snd_hda_intel bus-ID: 12:00.3 chip-ID: 1022:1457
               Card-2 Advanced Micro Devices [AMD/ATI] Device aae0
               driver: snd_hda_intel bus-ID: 09:00.1 chip-ID: 1002:aae0
               Sound: Advanced Linux Sound Architecture v: k4.14.9-1-ARCH
    Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
               driver: r8169 v: 2.3LK-NAPI port: f000
               bus-ID: 05:00.0 chip-ID: 10ec:8168
               IF: enp5s0 state: down mac: 1c:1b:0d:e1:37:62
               Card-2: Qualcomm Atheros AR93xx Wireless Network Adapter
               driver: ath9k bus-ID: 06:00.0 chip-ID: 168c:0030
               IF: wlp6s0 state: up mac: d4:6e:0e:19:6d:71
    Drives:    HDD Total Size: 500.1GB (5.7% used)
               ID-1: /dev/sda model: Samsung_SSD_850 size: 500.1GB
               serial: S3R3NF1JA63755X
    Partition: ID-1: / size: 28G used: 9.0G (33%) fs: ext4 dev: /dev/sda5
               ID-2: /home size: 311G used: 14G (5%) fs: ext4 dev: /dev/sda7
               ID-3: swap-1 size: 4.00GB used: 0.00GB (0%)
               fs: swap dev: /dev/sda6
    Sensors:   System Temperatures: cpu: 29.8C mobo: N/A gpu: 31.0
               Fan Speeds (in rpm): cpu: N/A
    Info:      Processes: 251 Uptime: 1:58 Memory: 1663.0/7998.6MB
               Init: systemd v: 236 Gcc sys: 7.2.1
               Client: Shell (bash 4.4.121 running in gnome-terminal-) inxi: 2.3.53
  • i would try running LTS-Kernel by installing over pamac or pacman and choose it on boot + enable its autostarting like the wiki say:

    And do not forget to install also headers for the LTS kernel:

    sudo pacman -Syu linux-lts linux-lts-headers
  • I thought later kernels had better ryzen support? I gonna try LTS!

  • yes support for ryzen is new and under development, but to see if it is kernel related and as a backup it is good to give lts a try. you do not need to make it default bootkernel, you can simple install it and have it as an option on bootmenu.

  • when I boot with LTS I only gets a black screen.

  • do you run: 'sudo mkinitcpio -p linux-ltsalready? may you can do this by changing to TTY3 >[Ctrl+Alt+F3]` and login to CLI

  • After I choose LTS kernel. it load something that goes really fast and I cant see what it is. Then white screen and after a few seconds my screen goes to energy saving and my fans power up. So its not possible to change to tty3.

  • journalctl -b -0 > log.txt && echo ------- >> log.txt && journalctl -b -1 >> log.txt && echo ------- >> log.txt && journalctl -b -2 >> log.txt && cat log.txt | curl -F [email protected] https://ptpb.pw/?u=1

    will give last 3 boot logs, so i can take a look what is going wrong all together

  • thats done!

  • i do some editing on the commandline, as it do not take my seperators :( now it will work…

  • ok! thanks! :)

  • I disable virtualization on my motherboard. Now can I boot with LTS.

  • I feel bettet stability now with virtualization disabled. I will mark this solved for now.

  • I think it happend again. A sudden reboot.


  • journalctl -b -0 | curl -F [email protected] https://ptpb.pw/?u=1
  • I attached a log to my previous post. Thats my three last boot. Thank you!

  • jan 03 21:46:24 datorn kernel: amdgpu: [powerplay] 
                                    failed to send message 309 ret is 254 
    jan 03 21:46:24 datorn kernel: amdgpu: [powerplay] 
                                    failed to send pre message 14e ret is 254
    jan 03 21:46:36 datorn gsd-xsettings[889]: Failed to get current display configuration state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name "org.gnome.Mutter.DisplayConfig" does not exist
    jan 03 21:43:44 datorn dbus-daemon[428]: [system] Activation via systemd failed for unit 'polkit.service': Refusing activation, D-Bus is shutting down.
  • Ok? Thanks. :) exactly what is the problem and what can I do?

  • i have no idea ;) this failed messages looks seriously …

  • Hardware problem? Or gnome?

freeze31 reboot25 Posts 22Views 1541
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.