• Help with that!


    Im new user on Antergos KDE
    [[email protected] jmirandda420]# pacman -S rfkill
    resolviendo dependencias…
    buscando conflictos entre paquetes…
    :: rfkill y util-linux están en conflicto. ¿Quitar util-linux? [s/N] s
    error: no se pudo preparar la operación (no se pudieron satisfacer las dependencias)
    :: f2fs-tools: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: fakeroot: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: jfsutils: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: libsm: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: mkinitcpio: quitando «util-linux» se rompe la dependencia con «util-linux>=2.23»
    :: nilfs-utils: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: ntfs-3g: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: rasqal: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: reiserfsprogs: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: systemd: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: xapian-core: quitando «util-linux» se rompe la dependencia con «util-linux»
    :: zeromq: quitando «util-linux» se rompe la dependencia con «util-linux»

  • @jmirandda420 said in Help with that!:

    se rompe la dependencia con

    util-linux is providing rfkill by itself… so why do you want to install rfkill package?
    to install it you will need to uninstall util-linux and all packages depending on it…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad I do not know if it’s the rfkill but I can not activate the wireless interface

    ~]$ rfkill list all
    0: ideapad_wlan: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    1: ideapad_bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
    2: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no


    ~]$ iwconfig
    lo no wireless extensions.

    enp2s0 no wireless extensions.

  • @jmirandda420 said in Help with that!:

    wireless interface

    theń give info about it, may driver is needed, or some other configuration:

    sudo pacman -S inxi 
    
    inxi -Fxxc0
    

    and give the output here (plz in </> codetags)

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad

    ~]$ inxi -Fxxc0
    Resuming in non X mode: glxinfo not found. For package install advice run: inxi --recommends
    System: Host: OrganicFarmerServer Kernel: 4.13.11-1-ARCH x86_64 bits: 64 gcc: 7.2.0
    Desktop: KDE Plasma 5.11.3 (Qt 5.9.2) dm: lightdm Distro: Antergos Linux
    Machine: Device: laptop System: LENOVO product: 80E1 v: Lenovo G40-45 serial: N/A
    Mobo: LENOVO model: Lancer 4B2 v: SDK0H15299 WIN serial: N/A
    UEFI [Legacy]: LENOVO v: A2CN36WW(V2.04) date: 04/30/2015
    Chassis: type: 10 v: Lenovo G40-45 serial: N/A
    CPU: Dual core AMD E1-6010 APU with AMD Radeon R2 Graphics (-MCP-)
    arch: Puma rev.1 cache: 1024 KB
    flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 5392
    clock speeds: min/max: 1000/1350 MHz 1: 1347 MHz 2: 1347 MHz
    Graphics: Card: Advanced Micro Devices [AMD/ATI] Mullins [Radeon R2 Graphics]
    bus-ID: 00:01.0 chip-ID: 1002:9853
    Display Server: N/A drivers: modesetting (unloaded: fbdev,vesa)
    tty size: 91x58
    Audio: Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
    driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1022:780d
    Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
    driver: snd_hda_intel bus-ID: 00:01.1 chip-ID: 1002:9840
    Sound: Advanced Linux Sound Architecture v: k4.13.11-1-ARCH
    Network: Card-1: Broadcom Limited BCM43142 802.11b/g/n
    bus-ID: 01:00.0 chip-ID: 14e4:4365
    IF: N/A state: N/A mac: N/A
    Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
    driver: r8169 v: 2.3LK-NAPI port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8168
    IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 68:f7:28:dd:79:f3
    Drives: HDD Total Size: 120.0GB (11.4% used)
    ID-1: /dev/sda model: WDC_WD1200BEVS size: 120.0GB serial: WD-WXC208018897
    ID-2: /dev/mmcblk1 model: N/A size: 15.5GB serial: 0x11c32bc0
    Partition: ID-1: / size: 41G used: 9.1G (23%) fs: ext4 dev: /dev/sda2
    ID-2: swap-1 size: 4.09GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
    Sensors: System Temperatures: cpu: 57.6C mobo: N/A gpu: 58.0
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 134 Uptime: 1:40 Memory: 1587.5/3416.6MB
    Init: systemd v: 235 Gcc sys: 7.2.0
    Client: Shell (bash 4.4.121 running in konsole) inxi: 2.3.43

  • @jmirandda420 said in Help with that!:

    Network: Card-1: Broadcom Limited BCM43142 802.11b/g/n

    sudo pacman -S broadcom-wl-dkms

    and them reboot

  • as @judd say installing the driver package and reboot…

    you are Organic Farmer in real live ???

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad said in Help with that!:

    you are Organic Farmer in real live

    Nop, Why ???

    I do not understand …

  • @judd aihh Not you i want to ask:lemon: @jmirandda420 :peach: as it is:avocado: inside:eggplant: machine:green_apple: name :corn: (i was posting from smartphone)

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • Restart is being installed later, I comment what happens, thanks to the two

  • @joekamprad said in Help with that!:

    (i was posting from smartphone)

    No problem ;)

  • Yes, I am an organic farmer but not only vegetable: D
    I come from ubuntu and I was used to it but I wanted a new distro ubuntu is very slow and works better with kde I just discovered antergos

  • I already install it and restart but it still does not leave the wi-fi switch, I can not turn it on it keeps coming out

    ~]$ iwconfig
    enp2s0 no wireless extensions.

    lo no wireless extensions.

  • journalctl -b -0 > log.txt && cat log.txt | curl -F [email protected] https://ptpb.pw/?u=1
    

    this will give all what fails and are done on last boot (it gives out a url you can post here)

    i was driving a organic store for long time :)

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @jmirandda420 said in Help with that!:

    I already install it and restart but it still does not leave the wi-fi switch, I can not turn it on it keeps coming out

    ~]$ iwconfig
    enp2s0 no wireless extensions.

    lo no wireless extensions.

    systemctl enable NetworkManager.service and also install systemctl enable dhcpcd.service and restart again

  • Could you also paste this result ?

    systemctl --state=active | grep net

    ?

  • @judd the out

    ~]$ systemctl --state=active | grep net
    sys-devices-pci0000:00-0000:00:02.4-0000:02:00.0-net-enp2s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    sys-subsystem-net-devices-enp2s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    network.target loaded active active Network

    the other I did and already reboot and everything but still does not appear the switch of the previous commands

  • @jmirandda420 said in Help with that!:

    the other I did and already reboot and everything but still does not appear the switch of the previous commands

    yes, it only has activity per ethernet or cable with the second card Card-2: Realtek RTL8111 / 8168/8411 PCIE Gigabit Ethernet Controller

    mmm…
    It could be a firmware problem too …

    yaourt -S b43-firmware and reboot now

    ?

  • The bootlog will show what went wrong

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad said in Help with that!:

    The bootlog will show what went wrong

    Yes sure, but I have one doubt …

    really the command for the installation of the firmware should be

    yaourt -S b43-firmware --noconfirm

that1 Posts 61Views 786
Log in to reply