• TSC_DEADLINE disabled due to Errata; please update microcode to: 0xb2


    @mmartin20tw

    Please show the output of
    sudo fdisk -l

  • @manuel

    (sorry for using manjaro xD too lazy to remake the LiveUSB)

    [manjaro-gnome manjaro]# fdisk -l
    Disk /dev/loop0: 64.9 MiB, 67997696 bytes, 132808 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes

    Disk /dev/loop1: 290.9 MiB, 304984064 bytes, 595672 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes

    Disk /dev/loop2: 875.2 MiB, 917659648 bytes, 1792304 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes

    Disk /dev/loop3: 399.4 MiB, 418775040 bytes, 817920 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes

    Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: A307AC73-93CE-4EF3-8427-D0F9E51794EA

    Device Start End Sectors Size Type
    /dev/sda1 2048 1543921663 1543919616 736.2G Microsoft basic data
    /dev/sda2 1748719616 1937901255 189181640 90.2G Linux filesystem
    /dev/sda3 1937901256 1953525134 15623879 7.5G Linux filesystem

    Disk /dev/sdb: 119.2 GiB, 128035676160 bytes, 250069680 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: gpt
    Disk identifier: 7D74A3C4-2BF9-40ED-8E68-5A6A31720C7D

    Device Start End Sectors Size Type
    /dev/sdb1 2048 534527 532480 260M EFI System
    /dev/sdb2 534528 567295 32768 16M Microsoft reserved
    /dev/sdb3 567296 249047039 248479744 118.5G Microsoft basic data
    /dev/sdb4 249047040 250068991 1021952 499M Windows recovery environment

    Disk /dev/sdc: 7.2 GiB, 7707033600 bytes, 15052800 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x117a4ae7

    Device Boot Start End Sectors Size Id Type
    /dev/sdc1 * 64 3453131 3453068 1.7G cd unknown
    /dev/sdc2 3453132 3461323 8192 4M ef EFI (FAT-12/16/32)

  • @mmartin20tw said in TSC_DEADLINE disabled due to Errata; please update microcode to: 0xb2:

    @paul.fabre3000 I just boot into LiveUSB and I the intel-ucode.img file is right there in the boot folder, so why would I get error message that said no such file when I add /boot/intel-ucode.img to my grub initrd line?

    line should be like this:

    initrd	/intel-ucode.img /initramfs-linux.img
    
  • @joekamprad I did this and it would print out “file ‘/intel-ucode.img’ not found” :(

  • @mmartin20tw said in TSC_DEADLINE disabled due to Errata; please update microcode to: 0xb2:

    /dev/sda2 1748719616 1937901255 189181640 90.2G Linux filesystem
    /dev/sda3 1937901256 1953525134 15623879 7.5G Linux filesystem

    this is your Antergos installation sda2 for root (/) and sda3 is your swap… so no extra boot partition and it is a folder inside root… /boot … as have not time to read all hat was postet here before at the moment … i ask do you already try to chroot into the installed Antergos and simple re build files for grub and reinstall it??? and it looks like you have two windows installations? and it is EFI system ? you are using grub to boot?

  • @joekamprad I only have one Windows 10 installation on partition sdb3, the one on sda1 is the data disk (my /D haha). I mounted the EFI/boot to sdb1 for the sake of dual booting

    I haven’t tried out chroot into installed Antergos yet, I will try it out as soon as I have free time, I think it might be the solution to it.

    sdb–120G SSD (Windows 10 + EFI + recovery)
    sda–1TB HDD (Windows storage + Antergos)

  • chroot and then reinstall intel-ucode, grub mkconfig will not work.
    Also tried to update again under chroot and still no luck.

  • how exactly do you do this?

    sudo su
    mount /dev/sda2 /mnt
    mount /dev/sdb1 /mnt/boot/efi
    arch-chroot /mnt
    pacman -Syu
    pacman -S intel-ucode
    grub-mkconfig -o /boot/grub/grub.cfg
    

    The grub-mkconfig command will take very long to get done…

  • @mmartin20tw
    Please show the output of

    lsblk -fm
    

    You said you used Manjaro to get some output. Could you now also explain exactly what systems you have on your partitions?

  • @manuel I have Windows 10 and Antregos installed on my laptop, thx!

Posts 30Views 8405
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.