• Installing Discord?


    Heya, Im new to the whole Arch Linux Terminal commands and such since this is my 2nd Distro other then Linux Mint. But what im curious is, How exactly would I go about installing Discord step by step for example. Forgive me for my lack of knowledge but these new Arch Commands are quite different compared to standard Ubuntu commands. All replies are appreciated thanks! :confused:

  • @icecold7777 said in Installing Discord?:

    Discord
    It is aviable in AUR:
    https://aur.archlinux.org/packages/discord
    Enable AUR support inside pamac, or build and install with yaourt or pacaur from terminal:

    yaourt -S discord
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • Here are some help for comparing commands between some operating systems:
    https://wiki.archlinux.org/index.php/Pacman/Rosetta

  • @joekamprad ur key) libc++ built without any errors.

    Tommy commented on 2017-09-10 19:54
    Please do something with the keys for the installation.

    It changes everyday or what?

    Strit commented on 2017-09-11 06:47
    @Tommy
    The keys are not from this package, iit’s from a dependency (libc++). Ask them. :)

    deathye commented on 2017-09-14 10:07
    Sorry for my ignorance, but why discord needs libc++?

    discord 0.0.2-1 (2017-08-09 10:09)
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] (“A” to abort)
    ==> ------------------------------------
    ==> ^C
    [[email protected] ~]$ ^C
    [[email protected] ~]$ ^C
    [[email protected] ~]$ clear

    [[email protected] ~]$ yaourt -S discord

    ==> Downloading discord PKGBUILD from AUR…
    x .SRCINFO
    x .gitignore
    x Discord.desktop
    x Discord.install
    x Discord.sh
    x LICENSE
    x PKGBUILD
    metr1xx commented on 2017-09-09 21:25
    Hello,
    I have problems building libc++.
    That’s what it spat out.

    == Validating source files with sha512sums…
    llvm-5.0.0.src.tar.xz … Passed
    llvm-5.0.0.src.tar.xz.sig … Skipped
    libcxx-5.0.0.src.tar.xz … Passed
    libcxx-5.0.0.src.tar.xz.sig … Skipped
    libcxxabi-5.0.0.src.tar.xz … Passed
    libcxxabi-5.0.0.src.tar.xz.sig … Skipped
    == Verifying source file signatures with gpg…
    llvm-5.0.0.src.tar.xz … FAILED (unknown public key 0FC3042E345AD05D)
    libcxx-5.0.0.src.tar.xz … FAILED (unknown public key 0FC3042E345AD05D)
    libcxxabi-5.0.0.src.tar.xz … FAILED (unknown public key 0FC3042E345AD05D)
    == ERROR: One or more PGP signatures could not be verified!
    == ERROR: Makepkg was unable to build libc++.
    == Restart building libc++ ? [y/N]

    When I restart building it it just spits out the same again.
    What do?

    metr1xx commented on 2017-09-09 21:33
    The solution was to import the keys manually.
    As you can see in my previous comment it told me
    libcxxabi-5.0.0.src.tar.xz … FAILED (unknown public key 0FC3042E345AD05D)
    for example.

    After I ran “gpg --recv-keys 0FC3042E345AD05D” (replace 0FC3042E345AD05D with your key) libc++ built without any errors.

    Tommy commented on 2017-09-10 19:54
    Please do something with the keys for the installation.

    It changes everyday or what?

    Strit commented on 2017-09-11 06:47
    @Tommy
    The keys are not from this package, iit’s from a dependency (libc++). Ask them. :)

    deathye commented on 2017-09-14 10:07
    Sorry for my ignorance, but why discord needs libc++?

    discord 0.0.2-1 (2017-08-09 10:09)
    ( Unsupported package: Potentially dangerous ! )
    ==> Edit PKGBUILD ? [Y/n] (“A” to abort)
    ==> ------------------------------------
    ==>

  • what you want to say with the output of the comments on the PKGBUILD?

    you may asking for the keyerror?

    gpg --recv-key 0FC3042E345AD05D

    will solve the key error

    It is already inside the comments:

    @icecold7777 said in Installing Discord?:

    After I ran “gpg --recv-keys 0FC3042E345AD05D” (replace 0FC3042E345AD05D with your key) libc++ built without any errors.

    You can check for the comments also at the source of the PKGBUILD:
    https://aur.archlinux.org/packages/discord/

    If you want to understand exactly what it is about: https://wiki.archlinux.org/index.php/Arch_User_Repository

    Short it is only a command list that will help to build a package from source and integrate it to the specialities of the system (archbased here) you will need to have dependencies installed, or if thouse are not n the repository (as a ready package) you need to build this ones too (automated but needs intervention like say yes )

    Bild Text

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad Forgive me for my lack of Knowledge once more but ive read everything you guys have sent me and still quite confused… Not sure what these “keys” are and such. and never even used the “Makepkg” command. All im really asking for is a step by step example of how to install it from step 1. to the last step just so i can learn from my mistakes and see how you guys would go about it. :confused:

  • I give you all steps to get it installed already:

    gpg --recv-key 0FC3042E345AD05D

    You need to get the key from the maintainer of the 3 depending packages from AUR, nothing you need to do everytime…
    the second command will do the rest:

    yaourt -S discord

    it get the PKGBUILD , run makepkg and will install the package.

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • Oh, Gotcha thank you very much, I’ll try this it was just a misunderstanding of what you said.

  • @icecold7777 you got it then working?

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • @joekamprad gpg --recv-key 0FC3042E345AD05D
    key 0FC3042E345AD05D:
    2 signatures not checked due to missing keys
    gpg: key 0FC3042E345AD05D: “Hans Wennborg [email protected]” not changed
    gpg: Total number processed: 1
    gpg: unchanged: 1

    Seems like the First code you gave me isn’t working.

  • @icecold7777 unclear to me what you want to say…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

  • gpg --recv-keys 11E521D646982372EB577A1F8F0871F202119294

    also needs to be added…

    as it is say at the source of dependencies:https://aur.archlinux.org/packages/libc%2B%2B/

    Execute the following to import keys using gpg:
    gpg --recv-keys <KEYID - See ‘validpgpkeys’ array in PKGBUILD>

    validpgpkeys= (# Tom Stellard [email protected] (.1 releases)
    # https://pgp.mit.edu/pks/lookup?op=get&search=0x8F0871F202119294
    11E521D646982372EB577A1F8F0871F202119294
    # Hans Wennborg [email protected] (.0 releases)
    # http://releases.llvm.org/4.0.0/hans-gpg-key.asc
    B6C8F98282B944E3B0D5C2530FC3042E345AD05D)

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3 GNOME

discord3 installing63 Posts 12Views 496
Log in to reply