• ACPI errors during boot on MSI laptop


    Hi everyone :blush:

    Yesterday I installed Antergos on my laptop and during boot I saw some ACPI errors. I also tried Ubuntu and Arch but it didn’t solve the problem so I decided to ask for your help.

    Ram: 7.7 GiB
    Processor: Intel® Core™ i5-4200H CPU @ 2.80GHz × 4
    Graphics: Intel® Haswell Mobile
    OS: Antergos Linux 64-bit
    Disk: 975,3 GB
    I also have GTX850M but didn’t see it on system information.

    This is what I get after using `journalctl -p 3 -xb

    -- Logs begin at Tue 2017-08-22 13:53:22 +03, end at Wed 2017-08-23 07:56:47 +03
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: No handler for Region [EC__] (ffff9fe6e
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: Region EmbeddedControl (ID=3) has no ha
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: Method parse/execution failed [\_SB.PCI
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: No handler for Region [EC__] (ffff9fe6e
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: Region EmbeddedControl (ID=3) has no ha
    Ağu 23 07:07:51 ARCH kernel: ACPI Error: Method parse/execution failed [\_SB.PCI
    Ağu 23 07:07:53 ARCH kernel: ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace l
    Ağu 23 07:07:53 ARCH kernel: ACPI Error: Method parse/execution failed [\_SB.PCI
    Ağu 23 07:07:55 ARCH kernel: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FA
    Ağu 23 07:07:55 ARCH kernel: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FA
    Ağu 23 07:07:56 ARCH kernel: nouveau 0000:01:00.0: DRM: Pointer to TMDS table in
    Ağu 23 07:07:56 ARCH kernel: nouveau 0000:01:00.0: DRM: Pointer to flat panel ta
    Ağu 23 07:08:47 ARCH bluetoothd[585]: Failed to set mode: Blocked through rfkill
  • @Syrinx said in ACPI errors during boot on MSI laptop:

    bluetoothd[585]: Failed to set mode: Blocked through rfkill

    is the only error you should have a look to…
    but the log is cut of at the end…

    so if you like provide the full like this:

    journalctl -p 3 -xb | curl -F [email protected] https://ptpb.pw/?u=1
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @Syrinx said in ACPI errors during boot on MSI laptop:

    I also have GTX850M but didn’t see it on system information.

    this would link to hybrid graphics? like bumblebee:
    https://antergos.com/wiki/hardware/bumblebee-for-nvidia-optimus/

    lspci -vnn | grep '\''[030[02]]' | curl -F [email protected] https://ptpb.pw/?u=1
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

Posts 3Views 111
Log in to reply