• No puedo instalar Antergos


    Hola. Soy un principiante y no tengo conocimientos.
    Al bootear un usb con la iso utilizando el comando dd no funciona.
    Les pregunto si mi equipo es demasiado antiguo para correrlo.
    Les paso los datos que encontré.
    Muchas gracias

    # biosdecode 3.1
    SMBIOS 2.5 present.
    	Structure Table Length: 906 bytes
    	Structure Table Address: 0x000DC010
    	Number Of Structures: 25
    	Maximum Structure Size: 148 bytes
    ACPI 2.0 present.
    	OEM Identifier: LENOVO
    	RSD Table 32-bit Address: 0xBDBF600B
    	XSD Table 64-bit Address: 0x00000000BDBF6067
    BIOS32 Service Directory present.
    	Revision: 0
    	Calling Interface Address: 0x000FDBF0
    Intel Multiprocessor present.
    	Specification Revision: 1.4
    	Configuration Table Address: 0x0009F971
    	Mode: Virtual Wire
    PNP BIOS 1.0 present.
    	Event Notification: Not Supported
    	Real Mode 16-bit Code Address: E5AD:A96B
    	Real Mode 16-bit Data Address: 0040:0000
    	16-bit Protected Mode Code Address: 0x000FC2AB
    	16-bit Protected Mode Data Address: 0x00000400
    
    # dmidecode 3.1
    Getting SMBIOS data from sysfs.
    SMBIOS 2.5 present.
    25 structures occupying 906 bytes.
    Table at 0x000DC010.
    
    Handle 0x0000, DMI type 0, 24 bytes
    BIOS Information
    	Vendor: LENOVO
    	Version: 6GET18WW(V1.09)     
    	Release Date: 05/22/2009
    	Address: 0xE55F0
    	Runtime Size: 109072 bytes
    	ROM Size: 2048 kB
    	Characteristics:
    		PCI is supported
    		PNP is supported
    		APM is supported
    		BIOS is upgradeable
    		BIOS shadowing is allowed
    		ESCD support is available
    		Boot from CD is supported
    		Selectable boot is supported
    		EDD is supported
    		5.25"/360 kB floppy services are supported (int 13h)
    		5.25"/1.2 MB floppy services are supported (int 13h)
    		3.5"/720 kB floppy services are supported (int 13h)
    		3.5"/2.88 MB floppy services are supported (int 13h)
    		Print screen service is supported (int 5h)
    		8042 keyboard services are supported (int 9h)
    		Serial services are supported (int 14h)
    		Printer services are supported (int 17h)
    		CGA/mono video services are supported (int 10h)
    		ACPI is supported
    		USB legacy is supported
    		LS-120 boot is supported
    		BIOS boot specification is supported
    		Targeted content distribution is supported
    	BIOS Revision: 0.24
    	Firmware Revision: 0.24
    
    Handle 0x0001, DMI type 1, 27 bytes
    System Information
    	Manufacturer: LENOVO
    	Product Name: 4233A34             
    	Version: Lenovo 3000 G530                
    	Serial Number: R8ADNF8                                     
    	UUID: 0B361FA1-82E2-11DE-A5A3-00235AD4F8C9
    	Wake-up Type: Power Switch
    	SKU Number: Lenovo
    	Family: Lenovo
    
    Handle 0x0002, DMI type 2, 8 bytes
    Base Board Information
    	Manufacturer: LENOVO
    	Product Name: KIWDX
    	Version: REFERENCE
    	Serial Number: 11S43N8351Z1ZG6H98B7R7          
    
    Handle 0x0003, DMI type 3, 17 bytes
    Chassis Information
    	Manufacturer: No Enclosure
    	Type: Notebook
    	Lock: Not Present
    	Version: N/A
    	Serial Number: None
    	Asset Tag: No Asset Tag
    	Boot-up State: Safe
    	Power Supply State: Safe
    	Thermal State: Safe
    	Security Status: None
    	OEM Information: 0x00001234
    
    Handle 0x0004, DMI type 4, 40 bytes
    Processor Information
    	Socket Designation: U2E1
    	Type: Central Processor
    	Family: Core 2
    	Manufacturer: Intel
    	ID: 7A 06 01 00 FF FB EB BF
    	Signature: Type 0, Family 6, Model 23, Stepping 10
    	Flags:
    		FPU (Floating-point unit on-chip)
    		VME (Virtual mode extension)
    		DE (Debugging extension)
    		PSE (Page size extension)
    		TSC (Time stamp counter)
    		MSR (Model specific registers)
    		PAE (Physical address extension)
    		MCE (Machine check exception)
    		CX8 (CMPXCHG8 instruction supported)
    		APIC (On-chip APIC hardware supported)
    		SEP (Fast system call)
    		MTRR (Memory type range registers)
    		PGE (Page global enable)
    		MCA (Machine check architecture)
    		CMOV (Conditional move instruction supported)
    		PAT (Page attribute table)
    		PSE-36 (36-bit page size extension)
    		CLFSH (CLFLUSH instruction supported)
    		DS (Debug store)
    		ACPI (ACPI supported)
    		MMX (MMX technology supported)
    		FXSR (FXSAVE and FXSTOR instructions supported)
    		SSE (Streaming SIMD extensions)
    		SSE2 (Streaming SIMD extensions 2)
    		SS (Self-snoop)
    		HTT (Multi-threading)
    		TM (Thermal monitor supported)
    		PBE (Pending break enabled)
    	Version: CPU Version
    	Voltage: 3.3 V
    	External Clock: Unknown
    	Max Speed: 4096 MHz
    	Current Speed: 2000 MHz
    	Status: Populated, Enabled
    	Upgrade: ZIF Socket
    	L1 Cache Handle: 0x0005
    	L2 Cache Handle: 0x0006
    	L3 Cache Handle: Not Provided
    	Serial Number: Not Specified
    	Asset Tag: Not Specified
    	Part Number: Not Specified
    	Core Count: 2
    	Core Enabled: 2
    	Thread Count: 2
    	Characteristics:
    		64-bit capable
    
    Handle 0x0005, DMI type 7, 19 bytes
    Cache Information
    	Socket Designation: L1 Cache
    	Configuration: Enabled, Socketed, Level 1
    	Operational Mode: Write Back
    	Location: Internal
    	Installed Size: 64 kB
    	Maximum Size: 64 kB
    	Supported SRAM Types:
    		Burst
    		Pipeline Burst
    		Asynchronous
    	Installed SRAM Type: Asynchronous
    	Speed: Unknown
    	Error Correction Type: Unknown
    	System Type: Unknown
    	Associativity: Unknown
    
    Handle 0x0006, DMI type 7, 19 bytes
    Cache Information
    	Socket Designation: L2 Cache
    	Configuration: Enabled, Socketed, Level 2
    	Operational Mode: Write Back
    	Location: Internal
    	Installed Size: 1024 kB
    	Maximum Size: 4096 kB
    	Supported SRAM Types:
    		Burst
    		Pipeline Burst
    		Asynchronous
    	Installed SRAM Type: Burst
    	Speed: Unknown
    	Error Correction Type: Unknown
    	System Type: Unknown
    	Associativity: Unknown
    
    Handle 0x0007, DMI type 8, 9 bytes
    Port Connector Information
    	Internal Reference Designator: J1A1
    	Internal Connector Type: None
    	External Reference Designator: Keyboard
    	External Connector Type: Circular DIN-8 male
    	Port Type: Keyboard Port
    
    Handle 0x0008, DMI type 8, 9 bytes
    Port Connector Information
    	Internal Reference Designator: J1A1
    	Internal Connector Type: None
    	External Reference Designator: PS/2 Mouse
    	External Connector Type: Circular DIN-8 male
    	Port Type: Mouse Port
    
    Handle 0x0009, DMI type 9, 13 bytes
    System Slot Information
    	Designation: PCI Slot J8B3
    	Type: 32-bit PCI
    	Current Usage: Unknown
    	Length: Long
    	ID: 0
    	Characteristics:
    		5.0 V is provided
    		3.3 V is provided
    
    Handle 0x000A, DMI type 10, 6 bytes
    On Board Device Information
    	Type: Sound
    	Status: Disabled
    	Description: HD-Audio
    
    Handle 0x000B, DMI type 11, 5 bytes
    OEM Strings
    	String 1: 0
    	String 2: 0
    	String 3: 0
    
    Handle 0x000C, DMI type 12, 5 bytes
    System Configuration Options
    	Option 1: None
    
    Handle 0x000D, DMI type 16, 15 bytes
    Physical Memory Array
    	Location: System Board Or Motherboard
    	Use: System Memory
    	Error Correction Type: None
    	Maximum Capacity: 4 GB
    	Error Information Handle: Not Provided
    	Number Of Devices: 2
    
    Handle 0x000E, DMI type 17, 27 bytes
    Memory Device
    	Array Handle: 0x000D
    	Error Information Handle: No Error
    	Total Width: 64 bits
    	Data Width: 64 bits
    	Size: 2048 MB
    	Form Factor: SODIMM
    	Set: 1
    	Locator: M1
    	Bank Locator: Bank 0
    	Type: DDR2
    	Type Detail: Synchronous
    	Speed: 667 MT/s
    	Manufacturer: Mfg 0
    	Serial Number: 1234-B0
    	Asset Tag: Not Specified
    	Part Number: SODIMM000
    
    Handle 0x000F, DMI type 17, 27 bytes
    Memory Device
    	Array Handle: 0x000D
    	Error Information Handle: No Error
    	Total Width: 64 bits
    	Data Width: 64 bits
    	Size: 2048 MB
    	Form Factor: SODIMM
    	Set: 1
    	Locator: M2
    	Bank Locator: Bank 1
    	Type: DDR2
    	Type Detail: Synchronous
    	Speed: 667 MT/s
    	Manufacturer: Mfg 1
    	Serial Number: 1234-B1
    	Asset Tag: Not Specified
    	Part Number: SODIMM001
    
    Handle 0x0010, DMI type 19, 15 bytes
    Memory Array Mapped Address
    	Starting Address: 0x00000000000
    	Ending Address: 0x000FFFFFFFF
    	Range Size: 4 GB
    	Physical Array Handle: 0x000D
    	Partition Width: 2
    
    Handle 0x0011, DMI type 20, 19 bytes
    Memory Device Mapped Address
    	Starting Address: 0x00000000000
    	Ending Address: 0x0007FFFFFFF
    	Range Size: 2 GB
    	Physical Device Handle: 0x000E
    	Memory Array Mapped Address Handle: 0x0010
    	Partition Row Position: Unknown
    	Interleave Position: Unknown
    	Interleaved Data Depth: Unknown
    
    Handle 0x0012, DMI type 20, 19 bytes
    Memory Device Mapped Address
    	Starting Address: 0x00080000000
    	Ending Address: 0x000FFFFFFFF
    	Range Size: 2 GB
    	Physical Device Handle: 0x000F
    	Memory Array Mapped Address Handle: 0x0010
    	Partition Row Position: Unknown
    	Interleave Position: Unknown
    	Interleaved Data Depth: Unknown
    
    Handle 0x0013, DMI type 32, 20 bytes
    System Boot Information
    	Status: <OUT OF SPEC>
    
    Handle 0x0014, DMI type 131, 22 bytes
    OEM-specific Type
    	Header and Data:
    		83 16 14 00 01 00 00 00 00 00 00 00 00 00 00 00
    		00 00 00 00 00 01
    	Strings:
    		TVT-Enablement
    
    Handle 0x0015, DMI type 131, 22 bytes
    OEM-specific Type
    	Header and Data:
    		83 16 15 00 01 00 00 00 00 00 00 00 00 00 00 00
    		00 00 00 00 00 01
    	Strings:
    		TVT-Enablement
    
    Handle 0x0016, DMI type 133, 5 bytes
    OEM-specific Type
    	Header and Data:
    		85 05 16 00 01
    	Strings:
    		KHOIHGIUCCHHII
    
    Handle 0x0017, DMI type 135, 10 bytes
    OEM-specific Type
    	Header and Data:
    		87 0A 17 00 50 54 07 03 01 02
    
    Handle 0x0018, DMI type 127, 4 bytes
    End Of Table
    

    y también les paso

    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
    02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
    02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
    04:00.0 Network controller: Broadcom Limited BCM4312 802.11b/g LP-PHY (rev 01)
    07:00.0 Ethernet controller: Broadcom Limited NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
    
  • @martinezjuanjose said in No puedo instalar Antergos:

    Al bootear un usb con la iso utilizando el comando dd no funciona.

    Qué es exactamente lo que te sucede? Directamente no arranca? No te sale el menú del grub? Ya seleccionas el USB como dispositivo de arranque?

  • ¿Ha intentado usar Etcher o Rufus? (De este artículo). Estos podrían darle mejor suerte.

    Lo siento por mi mal español, no es mi primer idioma.

    Keep trying, never give up. In the end, you will find that it was all worth it

    Community ISO: https://antergoscommunityeditions.wordpress.com
    Linux Basics: https://linuxbasicssite.wordpress.com

  • Muchas gracias por sus respuestas.
    El sistema lee el usb, ingreso al menú de Antergos para seleccionar el idioma (F2) y elegir por ejemplo ingresar en modo live.
    Luego se ve la barra de progreso de carga del kernel, y luego la pantalla se pone en negro y el sistema se reinicia volviendo a leer el usb.
    A la iso la chequee con md5sum y la he grabado con dd, y con etcher sin resultados.
    Actualmente estoy con Manjaro 17.0.1 Gellivara XFCE, pero con el kernel 4.4.73-1, versiones 4.8, 4.9 o 4.11 no arrancan, y quería pasarme a Antergos Gnome.
    Tampoco pude cargar las iso de arch-anywhere-2.2.7-2-x86_64, ni architect-2016.03.01-64bit, teniendo el mismo comportamiento que con Antergos.
    Desde ya muchas gracias por vuestra ayuda.
    Aprecio mucho eso.

  • Probé con antergos-nvidia-17.6-x86_64.iso y pude ingresar en modo live. Funcionan todas las aplicaciones y el ratón, pero no me detecta el teclado.
    Les recuerdo que es una portátil Lenovo, cuyas característícas ya indiqué.
    De antemano, muchas gracias por la ayuda.

  • @martinezjuanjose said in No puedo instalar Antergos:

    pero no me detecta el teclado.

    No puedes teclear? O es que te sale la configuración del teclado en inglés?

    Respecto al problema de arranque de todas las Arch y derivadas que pruebas, en realidad todas utilizan el mismo kernel que veo que te da problemas. Has probado arrancar con el parámetro nomodeset ?

  • Hola Karasu.
    En modo live por ejemplo abro la terminal con el ratón e intento escribir algún comando y al presionar las teclas no hay respuesta en el sistema, no escribe ningún caracter.
    Probé con nomodeset sin suerte.
    Este ingreso lo hice con antergos-nvidia, seleccionando el kernel con F4 “Sin ACPI”.
    Muchas gracias.-

  • @martinezjuanjose said in No puedo instalar Antergos:

    Sin ACPI

    mmm… un problema de compatibilidad con el nuevo kernel y tu ACPI ?

    Prueba con noapic acpi=off

  • Implementé la idea, pero no hubo cambios.
    Habrá alguna otra alternativa para ayudarme?
    Muchas gracias.-

  • Qué es exactamente lo que te sucede? Directamente ไม่มี arranca? ไม่มีการขาย el menú del grub? คุณ seleccionas el USB como dispositivo de arranque?:guitar:

  • Además del teclado, no funciona tampoco el touchpad, aunque si el raton en el puerto usb.
    Alguien me puede ayudar?
    Muchas gracias.-
    Seguí dándole vueltas a la sugerencia de Karasu y finalmente él tenía razón.
    La solución fue incorporar en el arranque "acpi=rsdt"
    Antergos ya domina mi pc.
    Muchas gracias!!!

    H

instalar7 puedo9 Posts 11Views 439
Log in to reply