• zfs dkms error during linux kernel (4.11.6-1) update -unsolved


    OK. Super. Please let me know how I may be of help.
    As far as I am aware Bash is sufficiently robust to sense a returned exit result from a child process and conditionally branch if non-zero which could be incorporated into the PKGBUILD script routine.

  • This is likely the cause: https://github.com/zfsonlinux/spl/issues/620

    Any possibility we could get a patch released for now until it makes its way downstream?

  • This is still not solved in any way. The kernel is updated almost every week or even daily lately and ZFS and DKMS are still working wrong in antergos. This is very frustrating. I added kernel updates to the pacman ignore list but this is not the way to go really. The antergos ZFS is @0.7.0.r2997.4.12.3_1-1 while ZFSonLinux is already @0.7.1-2 on AUR. Making bold statements about new filesystems should include up to date repos I think. Installing the AUR version did eliminate the dkms issue but it caused a whole bunch of dependency issues not so easy to solve by “everyone”. Is there any development going on here? Even the LTS updates are failing, leaving “everyone” with a totally unstable system if one doesn’t pay very close attention.

    If you need logs or any output please ask me or anybody to provide them if it helps with progress.

    Meanwhile pasting the errors I get since various kernel updates:

    :: Ejecutando los «hooks» de preinstalación...
    (1/1) Remove DKMS modules
    ==> dkms remove zfs/0.7.0 -k 4.9.47-1-lts
    Error! There is no instance of zfs 0.7.0
    for kernel 4.9.47-1-lts (x86_64) located in the DKMS tree.
    ==> dkms remove spl/0.7.0 -k 4.9.47-1-lts
    :: Procesando los cambios de los paquetes...
    (1/1) reinstalando linux-lts                                                                           [############################################################] 100%
    >>> Updating module dependencies. Please wait ...
    :: Ejecutando los «hooks» de posinstalación...
    (1/3) Install DKMS modules
    ==> dkms install zfs/0.7.0 -k 4.9.47-1-lts
    configure: error: 
            *** Please make sure the kmod spl devel <kernel> package for your
            *** distribution is installed then try again.  If that fails you
            *** can specify the location of the spl objects with the
            *** '--with-spl-obj=PATH' option.  Failed to find spl_config.h in
            *** any of the following:
            /usr/src/spl-0.7.0/4.9.47-1-lts                                                                                                                                   
            /usr/src/spl-0.7.0
    Error!  Build of zavl.ko failed for: 4.9.47-1-lts (x86_64)
    Consult the make.log in the build directory
    /var/lib/dkms/zfs/0.7.0/build/ for more information.
    ==> dkms install spl/0.7.0 -k 4.9.47-1-lts
    (2/3) Updating linux-lts initcpios
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
      -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
    ==> Starting build: 4.9.47-1-lts
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [autodetect]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
      -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
    ==> Starting build: 4.9.47-1-lts
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: wd719x
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    error: la orden no se ejecutó correctamente
    (3/3) Arming ConditionNeedsUpdate...
    

    I’m running on Linux 4.12.6-1 which is the last version which updated without errors for me.

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • Sooo today ZFS and SPL got updated in antergos repo which is nice (Thanks!), but it still fails to install the kernel correctly and now even with the earlier kernel (which just completely wrenched my machine):

    ==> Starting build: 4.12.6-1-ARCH
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: wd719x
    ==> WARNING: Possibly missing firmware for module: aic94xx
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    error: la orden no se ejecutó correctamente
    (4/6) Updating icon theme caches...
    (5/6) Arming ConditionNeedsUpdate...
    (6/6) Updating the desktop file MIME type cache...
    

    And just as much with the latest kernel:

    ==> dkms install zfs/0.7.1 -k 4.12.10-1-ARCH
    configure: error: 
            *** Please make sure the kmod spl devel <kernel> package for your
            *** distribution is installed then try again.  If that fails you
            *** can specify the location of the spl objects with the
            *** '--with-spl-obj=PATH' option.  Failed to find spl_config.h in
            *** any of the following:
            /usr/src/spl-0.7.1.4128/4.12.10-1-ARCH
            /usr/src/spl-0.7.1.4128
    Error!  Build of zavl.ko failed for: 4.12.10-1-ARCH (x86_64)
    Consult the make.log in the build directory
    /var/lib/dkms/zfs/0.7.1/build/ for more information.
    ==> dkms install vboxguest/5.1.26_OSE -k 4.12.10-1-ARCH
    ==> dkms install spl/0.7.1.4128 -k 4.12.10-1-ARCH
    (2/3) Updating linux initcpios
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
      -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 4.12.10-1-ARCH
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [autodetect]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
      -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 4.12.10-1-ARCH
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: wd719x
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    error: la orden no se ejecutó correctamente
    (3/3) Arming ConditionNeedsUpdate...
    

    The error message about spl_config.h not being found especially catches my eye since it definetly resides in /usr/src/spl-0.7.1.4128 where it supposedly is searched for…

    I have read elsewhere that this might be related to the GCC 7.+ issue here. Can anybody confirm this? Would it be sufficient to downgrade GCC? Would this have other side effects? Have read that this is a really bad idea due to it’s vast dependencies.

    I guess my only take at this very moment is to downgrade ZFS, SPL and Kernel all together as of this very minute my machine is unbootable…

    Edit 1:
    Reading this and this I cleaned up DKMS a bit fiddling with dkms status and removing some obsolete stuff appearing there.
    (Mainly the folder for zfs 0.7.0)

    I further added a folder of name 4.12.10-1-ARCH to /usr/src/spl-0.7.1.4128 and inside made a symlink spl_config.h -> ../spl_config.h to get around the error about the config file not being found.
    (This is DEFINETLY not for “everyone”! - to be fair I guess I sort of knew what I was up for when choosing ZFS but I don’t think this should be an excuse for such critical behaviour)

    The latest repo zfs 0.7.1.4128 throws another error for me:
    cp: the object '/var/lib/dkms/zfs/0.7.1.4128/4.9.47-1-lts/x86_64/' is not a directory
    This is because there’s no such directory created, it can be found in /var/lib/dkms/zfs/0.7.1/ instead. I symlinked this for the moment.
    This leaves me with the following dkms status though:

    [...]
    zfs, 0.7.1, 4.12.10-1-ARCH, x86_64: installed
    zfs, 0.7.1, 4.9.47-1-lts, x86_64: installed
    zfs, 0.7.1.4128, 4.12.10-1-ARCH, x86_64: built
    zfs, 0.7.1.4128, 4.9.47-1-lts, x86_64: built
    

    After all these changes I can run # pacman -S spl spl-utils zfs zfs-utils and at least get the kernels configured although zfs still says:

    ==> dkms remove zfs/0.7.1 -k 4.12.10-1-ARCH
    Error! There are no instances of module: zfs 0.7.1 located in the DKMS tree.
    

    !Note: Reinstalling the kernel and headers after all this will not work for me and throws all the old errors leaving me with unusable kernels - I still don’t know if I can boot this yet either.

    Still so I hope this may help as much fellow users as devs and suppose most of these edits will break with the next update anyways…

    Edit 2:
    After all of the above I am now running the following succesfully:

    [[email protected] /]# uname -r
    4.12.10-1-ARCH
    [[email protected] /]# dkms status
    spl, 0.7.1.4128, 4.12.10-1-ARCH, x86_64: installed
    spl, 0.7.1.4128, 4.9.47-1-lts, x86_64: installed
    zfs, 0.7.1, 4.12.10-1-ARCH, x86_64: installed
    zfs, 0.7.1, 4.9.47-1-lts, x86_64: installed
    zfs, 0.7.1.4128, 4.12.10-1-ARCH, x86_64: built
    zfs, 0.7.1.4128, 4.9.47-1-lts, x86_64: built
    

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • Hi!

    As you found out, I updated zfs and spl to 0.7.1 (sorry for the delay).

    I didn’t have the spl_config.h problem in my tests, so I’m not sure from where it come.

    But what’s always the main problem, is that there is no way to tell pacman to run post hooks in a determined order, so most of the time it tries to build zfs BEFORE building spl, and as zfs depends on spl, it fails.

    Thanks for your findings (and patience). I’ll work a bit more on this to find a stable solution.

  • @karasu Do I understand you right as a consequence to your comment that, after a failed kernel update, if I issue a # pacman -S zfs zfs-utils and then after that # pacman -S spl spl-utils it should configure everything well?

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • Hi,

    Well, should be just the oposite , first install spl and then zfs.

    sudo pacman -S spl
    sudo pacman -S zfs
    

    If that does not work, then you can try:

    sudo dkms install spl
    sudo dkms install zfs
    

    But to be honest, I haven’t experienced that spl_config.h error, so I do not have the slightest idea of what caused it in your machine.

  • The spl_config.h error is included in allmost all recent zfs build error logs (and actually in the log of thread starter dtschmitz) which is part of the kmod spl devel package message. I have no idea what it’s related to but I got it sorted by just symlinking it as mentioned.

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • @karasu I suppose you are fiddling around with this as todays pacman -Syuu included zfs and spl again. So as a feedback I’ll include my log, which essentially is the same as usual (sadly):

    :: Ejecutando los «hooks» de posinstalación...
    (1/7) Install DKMS modules
    ==> dkms install spl/0.7.1.41210 -k 4.12.10-1-ARCH
    ==> dkms install zfs/0.7.1 -k 4.9.47-1-lts
    configure: error: 
            *** Please make sure the kmod spl devel <kernel> package for your
            *** distribution is installed then try again.  If that fails you
            *** can specify the location of the spl objects with the
            *** '--with-spl-obj=PATH' option.  Failed to find spl_config.h in
            *** any of the following:
            /usr/src/spl-0.7.1.41210/4.9.47-1-lts
            /usr/src/spl-0.7.1.41210
    Error!  Build of zavl.ko failed for: 4.9.47-1-lts (x86_64)
    Consult the make.log in the build directory
    /var/lib/dkms/zfs/0.7.1/build/ for more information.
    ==> dkms install zfs/0.7.1 -k 4.12.10-1-ARCH
    cp: el objetivo '/var/lib/dkms/zfs/0.7.1.41210/4.12.10-1-ARCH/x86_64/' no es un directorio
    ==> dkms install spl/0.7.1.41210 -k 4.9.47-1-lts
    (2/7) Updating linux-lts initcpios
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
      -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
    ==> Starting build: 4.9.47-1-lts
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [autodetect]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
      -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
    ==> Starting build: 4.9.47-1-lts
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: wd719x
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zavl'
    ==> ERROR: module not found: `znvpair'
    ==> ERROR: module not found: `zunicode'
    ==> ERROR: module not found: `zcommon'
    ==> ERROR: module not found: `zfs'
    ==> ERROR: module not found: `zpios'
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> ERROR: module not found: `zfs'
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    error: la orden no se ejecutó correctamente
    (3/7) Updating linux initcpios
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
      -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 4.12.10-1-ARCH
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [autodetect]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
      -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 4.12.10-1-ARCH
      -> Running build hook: [base]
      -> Running build hook: [udev]
      -> Running build hook: [modconf]
      -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: wd719x
      -> Running build hook: [keyboard]
      -> Running build hook: [keymap]
      -> Running build hook: [resume]
      -> Running build hook: [zfs]
    ==> ERROR: module not found: `zlib_deflate'
      -> Running build hook: [filesystems]
    ==> Generating module dependencies
    ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    ==> WARNING: errors were encountered during the build. The image may not be complete.
    error: la orden no se ejecutó correctamente
    

    After that I issued # pacman -S spl without errors followed by # pacman -S zfs with the following errors:

    ==> dkms remove zfs/0.7.1 -k 4.9.47-1-lts
    Error! There is no instance of zfs 0.7.1
    for kernel 4.9.47-1-lts (x86_64) located in the DKMS tree.
    [...]
    ==> dkms install zfs/0.7.1 -k 4.9.47-1-lts
    cp: the object '/var/lib/dkms/zfs/0.7.1.41210/4.9.47-1-lts/x86_64/' is not a directory
    

    The cp error is due to the antergos versioning numbers as there really is no such directory created (There’s a directory 0.7.1 though). I will now reboot and see if the cp error is of critical importance, if so it’s easy to just symlink the folders again and reinstall zfs again from chroot.

    Edit: Booted just fine, but it’s apparently annoying and makes nervous to see errors while updating ;D

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • I have the same errors, I am glad your working on them.

    I usually just reinstall zfs after a failed update. So it does not break anything but just a tiny bit annoying ;).

    I make things work…
    My humble wiki: https://anotherlinux.com/

  • Today zfs and spl version numbering got changed in the antergos tree (kernel got updated as well). Updating all together still fails due to the kmod error but spl and zfs reinstalled without additional errors afterwards! Way to go! Thank you very much @karasu

    Edit: Attention! You might want to run # mkinitcpio -p linux after doing the spl and zfs reinstall when everything gets updated together (I got excited in this post, but didn’t do this and ended up chrooting into my system to do so)

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • Thanks for the info!

    Yes, I got rid off the odd kernel number versioning as you recommended.

    The problem of first running dkms on zfs and then on spl is still there (when updating).

    I have no idea how to fix this. As zfs depends on spl, spl hook should run first… but pacman runs hooks in an order that I do not understand.

  • Wouldn’t that be something to report in the Arch Bugtracker? I can’t find any reports on this issue there. Only one open entry regarding zfs and none on dkms anyways.

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • well, it compiled spl first so my update did not fail.

    I still have the none existent directory errors though. Id love to copy the output but my Desktop is down because of a paint job …

    I make things work…
    My humble wiki: https://anotherlinux.com/

  • @Deridjian said in zfs dkms error during linux kernel (4.11.6-1) update -unsolved:

    Wouldn’t that be something to report in the Arch Bugtracker?

    zfs is an antergos package.

    I make things work…
    My humble wiki: https://anotherlinux.com/

  • True. As karasu pointed out though this is caused by pacman posthook ordering and different people with different ARCH distros are experiencing this issue with zfs on linux. Wouldn’t it be ok to have pacman be aware of this ordering?

    Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing had happened.

  • @Deridjian said in zfs dkms error during linux kernel (4.11.6-1) update -unsolved:

    Wouldn’t it be ok to have pacman be aware of this ordering?

    I’ll check pacman documentation, but I think that they want all hooks to be able to run in any order by design.

  • I notices pacmac did not recognise that 1-2 is higher than 1.0123123 (random numbers) on updating yesterday. I had to “pacman -Syyuu” which in turn installed the zfs module (failed) before the spl. Just reinstalled zfs. But anyway, thats my status.

    I make things work…
    My humble wiki: https://anotherlinux.com/

  • I updated today and have the same issue :) …Maybe getting zfs through the AUR is the answer as this will compile last every time?

    Or you could ask the Arch team… I can only imagine Antergos has a huge userbase and an answer would be anticipated.

    I make things work…
    My humble wiki: https://anotherlinux.com/

  • Hi Guys,
    I hate dropping into your discussion with an issue but since you have been working on correcting this I am wondering if anyone can point me to a guide to getting my system booted again I just got the zfs modules not loaded error after a reboot. When I try to load them it just says directory doesn’t exist. I don’t have the full picture of what needs to happen for a successful repair. I noticed from your posts that some have had success reinstalling spl and zfs but I’m going to have to try the repair from my antergos install usb. Any help you could provide would be appreciated.

dkms5 error198 kernel79 during23 Posts 42Views 3267
Log in to reply