• sound trouble


    I’ve had the following problem for weeks, when I have antergos I do not have any more sound. This works only when I at the back of the PC the jack plug in and pull out?Does anyone have an idea?

    Here some issues which perhaps help:

    lsmod | grep 'snd'
    snd_hda_codec_via      24576  1
    snd_hda_codec_generic    69632  1 snd_hda_codec_via
    snd_hda_intel          36864  5
    snd_hda_codec         106496  3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_via
    snd_hda_core           65536  4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_via
    snd_hwdep              16384  1 snd_hda_codec
    snd_pcm                90112  4 snd_hda_intel,snd_hda_codec,snd_hda_core
    snd_timer              28672  1 snd_pcm
    snd                    65536  16 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_generic,snd_pcm,snd_hda_codec_via
    soundcore              16384  1 snd
    

    And this edition of:

    lspci -nn | grep -i audio
    cat /proc/asound/cards
    pacman -Qs alsa
    pacman -Qs pulseaudio
    pacman -Qs pavucontrol
    
    lspci -nn | grep -i audio
    00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
    cat /proc/asound/cards
    0 [MID]: HDA-Intel - HDA Intel MID
    HDA Intel MID at 0xf3ff8000 irq 46
    
    pacman -Qs alsa
    local/alsa-lib 1.1.4-1
        An alternative implementation of Linux sound support
    local/alsa-plugins 1.1.4-1
        Extra alsa plugins
    local/alsa-utils 1.1.4-1
        An alternative implementation of Linux sound support
    local/pulseaudio-alsa 2-3
    ALSA Configuration for PulseAudio
    local/zita-alsa-pcmi 0.2.0-3
    The successor of clalsadrv, provides easy access to ALSA PCM devices.
    
    pacman -Qs pulseaudio
    local/libcanberra-pulse 0.30+2+gc0620e4-1
        PulseAudio plugin for libcanberra
    local/pavucontrol 3.0-4
        PulseAudio Volume Control
    local/pulseaudio 10.0-3
        A featureful, general-purpose sound server
    local/pulseaudio-alsa 2-3
    ALSA Configuration for PulseAudio
    local/pulseaudio-bluetooth 10.0-3
    Bluetooth support for PulseAudio
    
    pacman -Qs pavucontrol
    local/pavucontrol 3.0-4
    PulseAudio Volume Control
    

    In advance many thanks for illuminating ideas

    LuG42

  • Hi!

    What DE are you using? I think different ones manage sound differently.

    Keep trying, never give up. In the end, you will find that it was all worth it

    Just have some relatives over. Be back in about a week

    Community ISO: https://antergoscommunityeditions.wordpress.com
    Linux Basics: https://linuxbasicssite.wordpress.com

  • what you mean with DE?

  • Desktop environment. At installation, did you choose Gnome, XFCE, openbox, KDE, etc.

  • i have gnome in use…

  • Are you using the keyboard keys to adjust the volume? Sorry for all the questions, just trying to get a better understanding of your problem.

  • try:

    alsamixer
    

    press [F6] > choose your intel card > look at the Volume control you want to hear sound from and see if it is muted

    do this for deeper info about your sounddevice:

    wget -O alsa-info.sh http://www.alsa-project.org/alsa-info.sh && bash alsa-info.sh --upload
    

    and post the link here…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • This post is deleted!
  • @moredoor
    No I have 2 Bose Frontspeaker i m use which are connected via a jack plug with the sound card. The volume I regulate over the volume control of Bose. This worked well over the years without problems.

  • looks like a lot muted channels and a surround sound card?

    check if your sound settings are correct inside gnome-control-center
    For stereo needs to put to “analog-stereo”

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • @joekamprad

    Hello ,

    In fact that was a real reference. I see in the gnome-control-center probably the first “HDMI Display Port-internal audio” of my screen (he has two speakers with on board) and unfortunately only! Only when I plug the jack on the back of my PC and unplug the line output appears - internal audio. How can I delete the HDMI Displayport or how can I reach the line output is only loaded?

  • usually the settings inside should be saved…
    But auto enable on plugin of jacks is something that i do not know about thow to setup…
    I can take a look later on this…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • @joekamprad said in sound trouble:

    usually the settings inside should be saved…
    But auto enable on plugin of jacks is something that i do not know about thow to setup…
    I can take a look later on this…

    ok

  • @joekamprad said in sound trouble:

    usually the settings inside should be saved…
    But auto enable on plugin of jacks is something that i do not know about how to setup…
    I can take a look later on this…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • $ rm -r ~/.pulse ~/.pulse-cookie ~/.config/pulse
    

    To reset pulse-configurations per user…
    Helps often to solve issues

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • @joekamprad said in sound trouble:

    To reset pulse-configurations per user…
    Helps often to solve issues

    Sorry I do not have these files in ./ Home

  • https://bbs.archlinux.org/viewtopic.php?id=226829

    Autodidacta en la VIDA …y en Linux, también.

  • @LuG42 yes depends on what you have done for configuration and DE e.t.c. but for shure

    $ rm -r ~/.config/pulse
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • @joekamprad

    rm -r ~/.pulse ~/.pulse-cookie ~/.config/pulse
    rm: das Entfernen von ‘/home/nexus/.pulse’ ist nicht möglich: Datei oder Verzeichnis nicht gefunden
    rm: das Entfernen von ‘/home/nexus/.pulse-cookie’ ist nicht möglich: Datei oder Verzeichnis nicht gefunden
    rm: das Entfernen von ‘/home/nexus/.config/pulse’ ist nicht möglich: Datei oder Verzeichnis nicht gefunden

    Sorry no files are in home

sound39 trouble10 Posts 51Views 1619
Log in to reply