• [HELP] Unformatted file system


    My laptop has 2 hard drive , one is SSD while the other is old HDD. I use my SSD as my main boot drive and HDD as storage. I seleted the SSD to install Antergos and i think that the HDD shouldn’t be touched or erased. After installing I installed Partitionmanager and checked the HDD and the file system become unknown. Is the HDD is being formatted? And any solution to recover it?The screenshot on Partitionmanager

  • http://imgur.com/H4lrnEZ The screenshot on Partitionmanager

  • can you give us the output of:

    $ sudo fdisk -l
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @joekamprad

    Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x117239b6

    Device Boot Start End Sectors Size Id Type
    /dev/sda1 * 2048 524287 522240 255M 83 Linux
    /dev/sda2 524288 483784703 483260416 230.4G 83 Linux
    /dev/sda3 483784704 500118191 16333488 7.8G f W95 Ext’d (LBA)
    /dev/sda5 483786752 500118191 16331440 7.8G 82 Linux swap / Solaris

    Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: 1C5B9867-9ECB-41B5-93F8-6AECB15DE5C7

    Device Start End Sectors Size Type
    /dev/sdb1 2050048 2582527 532480 260M EFI System
    /dev/sdb2 4630528 4632575 2048 1M Microsoft LDM metadata
    /dev/sdb3 4632576 4892671 260096 127M Microsoft reserved
    /dev/sdb4 4892672 1953525134 1948632463 929.2G Microsoft LDM data

  • @VolcaNoz said in [HELP] Unformatted file system:

    Microsoft LDM data

    https://en.wikipedia.org/wiki/Logical_Disk_Manager

    The HDD looks like there was a Windows installation on it with this kind of LVM from microsoft…

    Caus of this is out of my knowledge i would say Antergos can not see this…

    To mount this volume you need to install ldmtool from AUR:

    $ yaourt -S ldmtool
    

    and read here how to handle…
    Dynamic_Disks

    But back on your main question : it is NOT formatted by installation, only unreadable by your system!

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @joekamprad Alright, another problem encountered when installing ldmtools.
    ==> Starting build()…
    Making all in src
    CC libldm_1_0_la-mbr.lo
    CC libldm_1_0_la-gpt.lo
    CC libldm_1_0_la-ldm.lo
    CC ldmtool-ldmtool.o
    ldmtool.c:90:25: error: duplicate ‘const’ declaration specifier [-Werror=duplicate-decl-specifier]
    static const _command_t const commands[] = {
    ^~~~~
    cc1: all warnings being treated as errors
    make[2]: *** [Makefile:573: ldmtool-ldmtool.o] Error 1
    make[2]: *** Waiting for unfinished jobs…
    make[1]: *** [Makefile:499: all-recursive] Error 1
    make: *** [Makefile:406: all] Error 2
    /usr/bin/makepkg: line 729: logpipe: unbound variable

    fatal: BUG: initial ref transaction called with existing refs

  • https://aur.archlinux.org/packages/ldmtool

    https://github.com/mdbooth/libldm

    I do not know what this means PKGBUILD seems to be broken then…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @joekamprad seems other users also getting this error but there is no way to solve it.

  • @VolcaNoz said in [HELP] Unformatted file system:

    /usr/bin/makepkg: line 729: logpipe: unbound variable

    https://github.com/archlinuxfr/yaourt/issues/192

    A workaround to avoid the conflict with BUILDDIR between makepkg and autogen.sh, is to edit the PKGBUILD.

    The line: ./autogen.sh --prefix=’/usr’
    becomes: BUILDDIR=’’ ./autogen.sh --prefix=’/usr’

    But this would not work…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • But try to build manuall not with yaourt…
    download snapshot unpack and build with

    makepkg -si
    

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @joekamprad sorry i am new to this, i have no idea how to do it

  • No problem, i try to build, but fails too…
    At github you can see, last change was 5 y ago… so no wonder…
    I take a look, may there is another option…
    Windows is installed and usable?
    Caus this should be a option.

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    howto-install-antergos
    how to add system logs
    i3-wm#gnome-shell

  • @joekamprad the hdd comes with the laptop i just delete the windows partition instead of reformat,
    so maybe i should install windows and backup the data and then do a reformat on the hdd. Is that right?

unformatted1 system60 [help]2 Posts 13Views 506
Log in to reply