• SD Card reader won't work


    I have an Asus UX31E with a built in SD-Card reader.
    When I put in a freshly formatted card nothing happens. I formatted it with my Nikon D90 and with Fedora the reader worked out of the box.

    I saw the other thread but that solution is over three years old.

    Thanks in advance.

  • can you pastebin

    demsg
    

    output after plug in the card?
    or open a terminal with

    journalctl -f
    

    while insert the card…
    also output of lspci and lsusb [as root] would be helpfull…

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • [[email protected] ~]$ journalctl -f
    -- Logs begin at Fri 2017-02-17 16:06:24 CET. --
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: [Logging settings]
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Log Type : 0
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Log Level: 0x13
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: [Network filtering settings]
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Enabled : F
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Entries: (null)
    Mär 28 15:17:10 Polarbaer dbus-daemon[747]: Successfully activated service 'com.intel.dleyna-renderer'
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Calling GetRenderers method
    Mär 28 15:17:10 Polarbaer dleyna-renderer-service[13061]: Client :1.352 lost
    Mär 28 15:17:11 Polarbaer dleyna-renderer-service[13061]: dLeyna: Exit
    Mär 28 15:17:18 Polarbaer kernel: mmc0: new high speed SDHC card at address 0002
    
    
  • [[email protected] ~]$ sudo lspci
    [sudo] Passwort für amilopowers: 
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
    00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
    00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation QS67 Express Chipset Family LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
    02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    03:00.0 USB controller: Fresco Logic FL1009 USB 3.0 Host Controller (rev 02)
    [[email protected] ~]$ lsusb
    Bus 001 Device 014: ID 13d3:3375 IMC Networks Atheros AR3012 Bluetooth 4.0 Adapter
    Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
    Bus 001 Device 003: ID 064e:f300 Suyin Corp. UVC 0.3M Webcam
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    [[email protected] ~]$ 
    
    
  • With a SandDisk USB SD-Card reader it works neither.

  • It does not show up as a normal device as far as i can see…
    but:

    Mär 28 15:17:18 Polarbaer kernel: mmc0: new high speed SDHC card at address 0002
    

    Can you check if card is visible with:

    sudo fdisk -l
    
    lsmod | grep mm
    

    will show if modules are loaded

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • I don’t understand this but as I put in the card now it shows up in Nautilus.

    Thank you for your help.

  • :cyclone: do you reboot? So may there was accidently unloaded something (Modul)

    [updates once a week] = [90% less problems]
    [Li{u}n//u//{i}x] since 1988 - overcoming failure means success
    http://kamprad.net/howto-installing-antergos/
    how to add system logs

  • Possibly. But I think I never used the reader since I am working with Antergos. So I can’t tell you if it ever worked or not.

reader4 Posts 9Views 339
Log in to reply