• Running build hook: \[autodetect\]


    Hi,
    I tried to regenerate the kernel file with

    mkinitcpio -p linux
    

    But the process was freeze at the autodetect part.
    I tried few times but I also got an error at the same point.

    [[email protected] i-sty]\# mkinitcpio -p linux  
    ==\> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'  
    -\> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img  
    ==\> Starting build: 3.12.9-2-ARCH  
    -\> Running build hook: [base]  
    -\> Running build hook: [udev]  
    -\> Running build hook: [autodetect]  
    
    

    Don't forget to mark as [SOLVED], if your problem was solved!

  • Hi,
    I tried to regenerate the kernel file with

    mkinitcpio -p linux
    

    But the process was freeze at the autodetect part.
    I tried few times but I also got an error at the same point.

    [[email protected] i-sty]\# mkinitcpio -p linux  
    ==\> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'  
    -\> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img  
    ==\> Starting build: 3.12.9-2-ARCH  
    -\> Running build hook: [base]  
    -\> Running build hook: [udev]  
    -\> Running build hook: [autodetect]  
    
    

    Don't forget to mark as [SOLVED], if your problem was solved!

  • Could you please show us your /etc/mkinitcpio.conf ?

  • \# vim:set ft=sh  
    \# MODULES  
    \# The following modules are loaded before any boot hooks are  
    \# run. Advanced users may wish to specify all system modules  
    \# in this array. For instance:  
    \# MODULES="piix ide\_disk reiserfs"  
    MODULES="i915"  
      
    \# BINARIES  
    \# This setting includes any additional binaries a given user may  
    \# wish into the CPIO image. This is run last, so it may be used to  
    \# override the actual binaries included by a given hook  
    \# BINARIES are dependency parsed, so you may safely ignore libraries  
    BINARIES=""  
      
    \# FILES  
    \# This setting is similar to BINARIES above, however, files are added  
    \# as-is and are not parsed in any way. This is useful for config files.  
    FILES=""  
      
    \# HOOKS  
    \# This is the most important setting in this file. The HOOKS control the  
    \# modules and scripts added to the image, and what happens at boot time.  
    \# Order is important, and it is recommended that you do not change the  
    \# order in which HOOKS are added. Run 'mkinitcpio -H <hook name\>' for  
    \# help on a given hook.  
    \# 'base' is \_required\_ unless you know precisely what you are doing.  
    \# 'udev' is \_required\_ in order to automatically load modules  
    \# 'filesystems' is \_required\_ unless you specify your fs modules in MODULES  
    \# Examples:  
    \#\# This setup specifies all modules in the MODULES setting above.  
    \#\# No raid, lvm2, or encrypted root is needed.  
    \# HOOKS="base"  
    \#  
    \#\# This setup will autodetect all modules for your system and should  
    \#\# work as a sane default  
    \# HOOKS="base udev autodetect block filesystems"  
    \#  
    \#\# This setup will generate a 'full' image which supports most systems.  
    \#\# No autodetection is done.  
    \# HOOKS="base udev block filesystems"  
    \#  
    \#\# This setup assembles a pata mdadm array with an encrypted root FS.  
    \#\# Note: See 'mkinitcpio -H mdadm' for more information on raid devices.  
    \# HOOKS="base udev block mdadm encrypt filesystems"  
    \#  
    \#\# This setup loads an lvm2 volume group on a usb device.  
    \# HOOKS="base udev block lvm2 filesystems"  
    \#  
    \#\# NOTE: If you have /usr on a separate partition, you MUST include the  
    \# usr, fsck and shutdown hooks.  
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"  
      
    \# COMPRESSION  
    \# Use this to compress the initramfs image. By default, gzip compression  
    \# is used. Use 'cat' to create an uncompressed image.  
    \#COMPRESSION="gzip"  
    \#COMPRESSION="bzip2"  
    \#COMPRESSION="lzma"  
    \#COMPRESSION="xz"  
    \#COMPRESSION="lzop"  
    \#COMPRESSION="lz4"  
      
    \# COMPRESSION\_OPTIONS  
    \# Additional options for the compressor  
    \#COMPRESSION\_OPTIONS=""  
    
    

    I removed and reinstalled linunx, linux-headers and the mkinitcpio packages but the same error.
    I restartad my laptop and the system was started without any errors, but I don’t know why I can’t generate the kernel file

    Don't forget to mark as [SOLVED], if your problem was solved!

  • You might try changing this:

      
    TO:  
    
    

    to see if that will allow you to build. If it works, then you know at least where to look next.

    In God's love,
    †MaNNa <{{{\>< …to You all thanks and glory Lord Yeshua!

    And Jesus prayed to The Father, "And this is the way to ete…

Posts 6Views 1461
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.