• Gnome issues logging in after closing laptop.


    Anyone else having issues with GDM right now? So when I close the lid to my laptop (Acer C720) and then go to log back in I’m getting some odd behavior. I’m able to type my password (within a certain amount of time) to login and then it seems like I’m going to be logged in but it just flashes to my desktop background and then goes back to the lock screen. I say type my password within a certain amount of time because even if I type nothing it will still flash to my desktop background and then go to the lock screen again. Once it reaches the lock screen a second time I’m able to login by unlocking and typing my password. Hitting lock on the desktop while logged and then logging back in seems to be working fine (this is without closing the lid of the laptop, tried this about five times in a row with no issue). Last night I locked my laptop from the desktop and then closed the lid; when I went to login this morning I had the multiple lock screen issue. Anyone else seeing this sort of behaviour? Thanks.

  • Only to comment rather than to help but it almost seems symptomatic of a quasi-login loop that you are experiencing. Most especially with the “time consideration” you are mentioning.
    You might want to check the journal logs for this and see what the journal reports.

    Question: Do you have a SSD that you are using as opposed to using a Swap partition?

    Also, maybe this will help: journalctl -e -u gdm
    Use the correct coding tags for output. There is a sticky in the forums on how to do that.

    Also, see if there is a file for gdm in /etc/gdm/

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

  • @Modisc Away from laptop right now but am using 16GB SSD and have a 1.5GB swap partition on it as well. Will check logs when I get home. Thanks for the info.

  • @bazini2880
    Just so you know, it is generally not really a good idea, let alone necessary, to have the SSD active along with the Swap partition at the same time . It is either one or the other.

    Am only mentioning this in case you have both enabled in etc/fstab
    It is one or the other that you have to have enabled.

    Swap is not needed for system performances as much now as it used to be a few short years ago when the PCs most of us could afford were underpowered and memory modules were very expensive. Now most computers have adequate RAM.

    So if you use swap frequently, then theoretically, you are putting more wear and tear on your SSD.

    Also, since you posted this, I have noticed that I also seem to be experiencing the same thing. Though on Linux Mint. Same scenario. It’s really quite strange.

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

  • @Modisc
    Here’s what I’m getting from ‘journalctl -e -u gdm’:
    Jan 25 21:03:24 myuser gdm-password][1658]: pam_unix(gdm-password:auth): conversation failed
    Jan 25 21:03:24 myuser gdm-password][1658]: pam_unix(gdm-password:auth): auth could not identify password for [myuser]
    Jan 25 21:03:24 myuser gdm-password][1658]: gkr-pam: no password is available for user

  • Thanks for the tip on swap, have it commented out in /etc/fstab for now.

  • Hi @bazini2880
    systemctl --user

    scroll to bottom and report if all units were loaded or not. Then scroll throughout and post specific units that were not loaded.
    Do NOT post the entire output. Only the relevant part as mentioned/requested.
    man systemctl is your command liaison.

    check the following as well
    cat /etc/passwd Scroll down and look for your username.
    Does it say /home/bazzini2880:/bin/bash

    EDIT:
    I am just curious, but are you using a proprietary graphic driver?
    If so, would also like to know lspci -k | grep -A 2 -i "VGA"
    Also, to see if Xorg is telling you if something is wrong, do cat /var/log/Xorg.0.log
    Use three (```) for block of code to output. One (`) is just for lines.

    EDIT x2:
    Check also if you have librsvg installed.
    Maybe also redo the icon cache.
    Do gtk-update-icon-cache -f /usr/share/icons/gnome
    then
    gdk-pixbuf-query-loaders --update-cache
    restart gdm.

    To restart, do systemctl list-units and find the gdm.service name
    then you can use either the
    stop followed by start but better yet, for already running units, best to do try-restart (only if not running)
    or reload-or-restart

    READ VERY CAREFULLY man systemctl It is your command liason for restarting specific services.

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

  • @Modisc
    My username is in cat /etc/passwd

    All units loaded (45) via systemctl --user

    Output of lspci -k | grep -A 2 -i "VGA":

    00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) Subsystem: Acer Incorporated [ALI] Device 0a11 Kernel driver in use: i915

    Output of cat /var/log/Xorg.0.log:

    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [    66.013] X Protocol Version 11, Revision 0
    [    66.013] Build Operating System: Linux 3.19.2-1-ARCH i686 
    [    66.013] Current Operating System: Linux user 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:15:20 CEST 2015 i686
    [    66.013] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3e1930e8-0b31-4202-b04d-328c3baba837 rw tpm_tis.interrupts=0 modprobe.blacklist=ehci_pci
    [    66.013] Build Date: 14 April 2015  10:36:09AM
    [    66.013]  
    [    66.013] Current version of pixman: 0.32.6
    [    66.013] 	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    [    66.013] Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    66.013] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 30 08:49:48 2015
    [    66.014] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [    66.014] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    66.016] (==) No Layout section.  Using the first Screen section.
    [    66.016] (==) No screen section available. Using defaults.
    [    66.016] (**) |-->Screen "Default Screen Section" (0)
    [    66.016] (**) |   |-->Monitor ""
    [    66.017] (==) No monitor specified for screen "Default Screen Section".
    	Using a default monitor configuration.
    [    66.017] (==) Automatically adding devices
    [    66.017] (==) Automatically enabling devices
    [    66.017] (==) Automatically adding GPU devices
    [    66.017] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [    66.017] 	Entry deleted from font path.
    [    66.017] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [    66.017] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [    66.017] 	Entry deleted from font path.
    [    66.017] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [    66.017] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [    66.017] 	Entry deleted from font path.
    [    66.017] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [    66.017] (==) FontPath set to:
    	/usr/share/fonts/misc/,
    	/usr/share/fonts/TTF/,
    	/usr/share/fonts/Type1/
    [    66.017] (==) ModulePath set to "/usr/lib/xorg/modules"
    [    66.017] (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    66.017] (II) Loader magic: 0x829e700
    [    66.017] (II) Module ABI versions:
    [    66.017] 	X.Org ANSI C Emulation: 0.4
    [    66.017] 	X.Org Video Driver: 19.0
    [    66.017] 	X.Org XInput driver : 21.0
    [    66.017] 	X.Org Server Extension : 9.0
    [    66.021] (EE) systemd-logind: failed to get session: PID 436 does not belong to any known session
    [    66.021] (II) xfree86: Adding drm device (/dev/dri/card0)
    [    66.022] (--) PCI:*(0:0:2:0) 8086:0a06:1025:0a11 rev 11, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/64
    [    66.022] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [    66.023] (II) LoadModule: "glx"
    [    66.023] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    66.027] (II) Module glx: vendor="X.Org Foundation"
    [    66.027] 	compiled for 1.17.1, module version = 1.0.0
    [    66.027] 	ABI class: X.Org Server Extension, version 9.0
    [    66.027] (==) AIGLX enabled
    [    66.027] (==) Matched intel as autoconfigured driver 0
    [    66.027] (==) Matched intel as autoconfigured driver 1
    [    66.027] (==) Matched modesetting as autoconfigured driver 2
    [    66.027] (==) Matched fbdev as autoconfigured driver 3
    [    66.027] (==) Matched vesa as autoconfigured driver 4
    [    66.027] (==) Assigned the driver to the xf86ConfigLayout
    [    66.027] (II) LoadModule: "intel"
    [    66.027] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [    66.030] (II) Module intel: vendor="X.Org Foundation"
    [    66.030] 	compiled for 1.17.1, module version = 2.99.917
    [    66.030] 	Module class: X.Org Video Driver
    [    66.030] 	ABI class: X.Org Video Driver, version 19.0
    [    66.031] (II) LoadModule: "modesetting"
    [    66.031] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [    66.032] (II) Module modesetting: vendor="X.Org Foundation"
    [    66.032] 	compiled for 1.17.1, module version = 1.17.1
    [    66.032] 	Module class: X.Org Video Driver
    [    66.032] 	ABI class: X.Org Video Driver, version 19.0
    [    66.032] (II) LoadModule: "fbdev"
    [    66.032] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [    66.033] (II) Module fbdev: vendor="X.Org Foundation"
    [    66.033] 	compiled for 1.17.0, module version = 0.4.4
    [    66.033] 	Module class: X.Org Video Driver
    [    66.033] 	ABI class: X.Org Video Driver, version 19.0
    [    66.033] (II) LoadModule: "vesa"
    [    66.033] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [    66.033] (II) Module vesa: vendor="X.Org Foundation"
    [    66.033] 	compiled for 1.17.0, module version = 2.3.2
    [    66.033] 	Module class: X.Org Video Driver
    [    66.033] 	ABI class: X.Org Video Driver, version 19.0
    [    66.033] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [    66.034] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [    66.034] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [    66.034] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [    66.034] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [    66.034] (II) FBDEV: driver for framebuffer: fbdev
    [    66.034] (II) VESA: driver for VESA chipsets: vesa
    [    66.034] (++) using VT number 1
    
    [    66.035] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150130
    [    66.036] (WW) Falling back to old probe method for modesetting
    [    66.036] (WW) Falling back to old probe method for fbdev
    [    66.036] (II) Loading sub module "fbdevhw"
    [    66.036] (II) LoadModule: "fbdevhw"
    [    66.036] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [    66.037] (II) Module fbdevhw: vendor="X.Org Foundation"
    [    66.037] 	compiled for 1.17.1, module version = 0.0.2
    [    66.037] 	ABI class: X.Org Video Driver, version 19.0
    [    66.037] (WW) Falling back to old probe method for vesa
    [    66.038] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
    [    66.038] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2
    [    66.038] (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen Section" for depth/fbbpp 24/32
    [    66.038] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [    66.038] (==) intel(0): RGB weight 888
    [    66.038] (==) intel(0): Default visual is TrueColor
    [    66.038] (II) intel(0): Output eDP1 has no monitor section
    [    66.039] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
    [    66.039] (II) intel(0): Enabled output eDP1
    [    66.039] (II) intel(0): Output HDMI1 has no monitor section
    [    66.039] (II) intel(0): Enabled output HDMI1
    [    66.039] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [    66.039] (II) intel(0): Output VIRTUAL1 has no monitor section
    [    66.039] (II) intel(0): Enabled output VIRTUAL1
    [    66.039] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
    [    66.039] (==) intel(0): TearFree disabled
    [    66.039] (==) intel(0): DPI set to (96, 96)
    [    66.039] (II) Loading sub module "dri2"
    [    66.039] (II) LoadModule: "dri2"
    [    66.039] (II) Module "dri2" already built-in
    [    66.039] (II) Loading sub module "present"
    [    66.039] (II) LoadModule: "present"
    [    66.039] (II) Module "present" already built-in
    [    66.039] (II) UnloadModule: "modesetting"
    [    66.039] (II) Unloading modesetting
    [    66.039] (II) UnloadModule: "fbdev"
    [    66.039] (II) Unloading fbdev
    [    66.039] (II) UnloadSubModule: "fbdevhw"
    [    66.039] (II) Unloading fbdevhw
    [    66.039] (II) UnloadModule: "vesa"
    [    66.039] (II) Unloading vesa
    [    66.039] (==) Depth 24 pixmap format is 32 bpp
    [    66.044] (II) intel(0): SNA initialized with Haswell (gen7.5, gt1) backend
    [    66.044] (==) intel(0): Backing store enabled
    [    66.044] (==) intel(0): Silken mouse enabled
    [    66.045] (II) intel(0): HW Cursor enabled
    [    66.045] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [    66.046] (==) intel(0): DPMS enabled
    [    66.046] (==) intel(0): display hotplug detection enabled
    [    66.046] (II) intel(0): [DRI2] Setup complete
    [    66.046] (II) intel(0): [DRI2]   DRI driver: i965
    [    66.046] (II) intel(0): [DRI2]   VDPAU driver: i965
    [    66.046] (II) intel(0): direct rendering: DRI2 enabled
    [    66.046] (II) intel(0): hardware support for Present enabled
    [    66.046] (--) RandR disabled
    [    66.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [    66.115] (II) AIGLX: enabled GLX_ARB_create_context
    [    66.115] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [    66.115] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [    66.115] (II) AIGLX: enabled GLX_INTEL_swap_event
    [    66.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [    66.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [    66.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [    66.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [    66.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness
    [    66.115] (II) AIGLX: Loaded and initialized i965
    [    66.115] (II) GLX: Initialized DRI2 GL provider for screen 0
    [    66.120] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
    [    66.129] (II) intel(0): Setting screen physical size to 361 x 203
    [    66.217] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [    66.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    66.217] (**) Power Button: Applying InputClass "system-keyboard"
    [    66.217] (II) LoadModule: "evdev"
    [    66.217] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    66.218] (II) Module evdev: vendor="X.Org Foundation"
    [    66.218] 	compiled for 1.17.1, module version = 2.9.2
    [    66.218] 	Module class: X.Org XInput Driver
    [    66.218] 	ABI class: X.Org XInput driver, version 21.0
    [    66.218] (II) Using input driver 'evdev' for 'Power Button'
    [    66.218] (**) Power Button: always reports core events
    [    66.218] (**) evdev: Power Button: Device: "/dev/input/event5"
    [    66.218] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    66.218] (--) evdev: Power Button: Found keys
    [    66.218] (II) evdev: Power Button: Configuring as keyboard
    [    66.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [    66.218] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [    66.218] (**) Option "xkb_rules" "evdev"
    [    66.218] (**) Option "xkb_model" "pc104"
    [    66.219] (**) Option "xkb_layout" "us"
    [    66.246] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [    66.247] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [    66.247] (**) Video Bus: Applying InputClass "system-keyboard"
    [    66.247] (II) Using input driver 'evdev' for 'Video Bus'
    [    66.247] (**) Video Bus: always reports core events
    [    66.247] (**) evdev: Video Bus: Device: "/dev/input/event6"
    [    66.247] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [    66.247] (--) evdev: Video Bus: Found keys
    [    66.247] (II) evdev: Video Bus: Configuring as keyboard
    [    66.247] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
    [    66.247] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [    66.247] (**) Option "xkb_rules" "evdev"
    [    66.247] (**) Option "xkb_model" "pc104"
    [    66.247] (**) Option "xkb_layout" "us"
    [    66.247] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [    66.247] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    66.247] (**) Power Button: Applying InputClass "system-keyboard"
    [    66.247] (II) Using input driver 'evdev' for 'Power Button'
    [    66.247] (**) Power Button: always reports core events
    [    66.247] (**) evdev: Power Button: Device: "/dev/input/event2"
    [    66.248] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    66.248] (--) evdev: Power Button: Found keys
    [    66.248] (II) evdev: Power Button: Configuring as keyboard
    [    66.248] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [    66.248] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [    66.248] (**) Option "xkb_rules" "evdev"
    [    66.248] (**) Option "xkb_model" "pc104"
    [    66.248] (**) Option "xkb_layout" "us"
    [    66.248] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [    66.248] (II) No input driver specified, ignoring this device.
    [    66.248] (II) This device may have been added with another device file.
    [    66.248] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [    66.248] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    66.248] (**) Sleep Button: Applying InputClass "system-keyboard"
    [    66.248] (II) Using input driver 'evdev' for 'Sleep Button'
    [    66.249] (**) Sleep Button: always reports core events
    [    66.249] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [    66.249] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [    66.249] (--) evdev: Sleep Button: Found keys
    [    66.249] (II) evdev: Sleep Button: Configuring as keyboard
    [    66.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
    [    66.249] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [    66.249] (**) Option "xkb_rules" "evdev"
    [    66.249] (**) Option "xkb_model" "pc104"
    [    66.249] (**) Option "xkb_layout" "us"
    [    66.249] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [    66.249] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [    66.249] (**) Sleep Button: Applying InputClass "system-keyboard"
    [    66.249] (II) Using input driver 'evdev' for 'Sleep Button'
    [    66.249] (**) Sleep Button: always reports core events
    [    66.249] (**) evdev: Sleep Button: Device: "/dev/input/event4"
    [    66.249] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [    66.249] (--) evdev: Sleep Button: Found keys
    [    66.249] (II) evdev: Sleep Button: Configuring as keyboard
    [    66.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input4/event4"
    [    66.249] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
    [    66.249] (**) Option "xkb_rules" "evdev"
    [    66.249] (**) Option "xkb_model" "pc104"
    [    66.249] (**) Option "xkb_layout" "us"
    [    66.250] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
    [    66.250] (II) No input driver specified, ignoring this device.
    [    66.250] (II) This device may have been added with another device file.
    [    66.251] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
    [    66.251] (II) No input driver specified, ignoring this device.
    [    66.251] (II) This device may have been added with another device file.
    [    66.251] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
    [    66.251] (II) No input driver specified, ignoring this device.
    [    66.251] (II) This device may have been added with another device file.
    [    66.251] (II) config/udev: Adding input device Cypress APA Trackpad (cyapa) (/dev/input/event11)
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "evdev touchpad catchall"
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "touchpad catchall"
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "Default clickpad buttons"
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "touchpad peppy cyapa"
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "touchpad catchall"
    [    66.251] (**) Cypress APA Trackpad (cyapa): Applying InputClass "Default clickpad buttons"
    [    66.251] (II) LoadModule: "synaptics"
    [    66.251] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [    66.252] (II) Module synaptics: vendor="X.Org Foundation"
    [    66.252] 	compiled for 1.17.1, module version = 1.8.2
    [    66.252] 	Module class: X.Org XInput Driver
    [    66.252] 	ABI class: X.Org XInput driver, version 21.0
    [    66.252] (II) Using input driver 'synaptics' for 'Cypress APA Trackpad (cyapa)'
    [    66.252] (**) Cypress APA Trackpad (cyapa): always reports core events
    [    66.252] (**) Option "Device" "/dev/input/event11"
    [    66.303] (II) synaptics: Cypress APA Trackpad (cyapa): found clickpad property
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): x-axis range 0 - 870 (res 10)
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): y-axis range 0 - 470 (res 10)
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): pressure range 0 - 255
    [    66.303] (II) synaptics: Cypress APA Trackpad (cyapa): device does not report finger width.
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): buttons: left double triple
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): Vendor 0 Product 0
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): invalid finger width range.  defaulting to 0 - 15
    [    66.303] (**) Option "FingerLow" "10"
    [    66.303] (**) Option "FingerHigh" "10"
    [    66.303] (**) Option "TapButton1" "1"
    [    66.303] (**) Option "TapButton2" "2"
    [    66.303] (**) Option "TapButton3" "3"
    [    66.303] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [    66.303] (--) synaptics: Cypress APA Trackpad (cyapa): touchpad found
    [    66.303] (**) Cypress APA Trackpad (cyapa): always reports core events
    [    66.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c-0/0-0067/input/input11/event11"
    [    66.323] (II) XINPUT: Adding extended input device "Cypress APA Trackpad (cyapa)" (type: TOUCHPAD, id 11)
    [    66.323] (**) synaptics: Cypress APA Trackpad (cyapa): (accel) MinSpeed is now constant deceleration 2.5
    [    66.323] (**) synaptics: Cypress APA Trackpad (cyapa): (accel) MaxSpeed is now 1.75
    [    66.323] (**) synaptics: Cypress APA Trackpad (cyapa): (accel) AccelFactor is now 0.202
    [    66.323] (**) Cypress APA Trackpad (cyapa): (accel) keeping acceleration scheme 1
    [    66.323] (**) Cypress APA Trackpad (cyapa): (accel) acceleration profile 1
    [    66.323] (**) Cypress APA Trackpad (cyapa): (accel) acceleration factor: 2.000
    [    66.324] (**) Cypress APA Trackpad (cyapa): (accel) acceleration threshold: 4
    [    66.324] (--) synaptics: Cypress APA Trackpad (cyapa): touchpad found
    [    66.324] (II) config/udev: Adding input device Cypress APA Trackpad (cyapa) (/dev/input/mouse0)
    [    66.324] (**) Cypress APA Trackpad (cyapa): Ignoring device from InputClass "touchpad ignore duplicates"
    [    66.324] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
    [    66.324] (II) No input driver specified, ignoring this device.
    [    66.324] (II) This device may have been added with another device file.
    [    66.325] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
    [    66.325] (II) No input driver specified, ignoring this device.
    [    66.325] (II) This device may have been added with another device file.
    [    66.325] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
    [    66.325] (II) No input driver specified, ignoring this device.
    [    66.325] (II) This device may have been added with another device file.
    [    66.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [    66.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    66.325] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [    66.325] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    66.325] (**) AT Translated Set 2 keyboard: always reports core events
    [    66.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [    66.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [    66.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [    66.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [    66.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [    66.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [    66.325] (**) Option "xkb_rules" "evdev"
    [    66.325] (**) Option "xkb_model" "pc104"
    [    66.325] (**) Option "xkb_layout" "us"
    [    66.326] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
    [    66.326] (II) No input driver specified, ignoring this device.
    [    66.326] (II) This device may have been added with another device file.
    [    81.466] (II) AIGLX: Suspending AIGLX clients for VT switch```
  • @Modisc
    Librsvg is current and also updated caches. Thank you again for all of your help!

  • ok. So if this /home/bazzini2880:/bin/bash is as supposed to be
    and you don’t have a proprietary graphics driver and
    all units showed loaded and
    if the cache reloaded as given in the above directions with no corrective behavior noted there-after
    then I do not know what to say.

    Question: This must be one of the pre-compiled or AUR packaged kernels 4.0.1-1-ARCH you have installed?
    https://wiki.archlinux.org/index.php/Kernels

    Other than some minor errors in the Xorg file that are font related, those I doubt have relevancy.
    Fonts, or an invalid path or directory or deleted entries, I can not see causing this.

    Can check man mkfontdir and I believe, though don’t quote me on this, you may be using the -e option.

    Can you get boot files? The boot files would have to be from when this occurs. You can use a pastebin service if you like. If you do use a pastebin service, may also want to use an expiry date on those.

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

  • @Modisc
    I’m using kernel 4.3.3-3-ARCH

  • Ya it’s ok with the kernal. I guess it was just a question where the intent was curiosity .
    I probably misinterpreted that part of your Xorg. conf.

    EDIT; I am going to guess at what might be happening is that perhaps the hibernate and suspend processes are working normally fine on your system except for this issue/case.

    I will even venture to say that you could probably even switch over to a standard TTY, log in and do everything as normal (Just say’in. Don’t need to do).

    So what I think (and I emphasize that word “think” because I am not sure) is that your Gnome session is locked. So instead the standard gnome-screensaver password prompt box appears for some reason and does not accept your password even when typed correctly. In other words no numlock or capslock.

    Or maybe it does accept your password and continues to bring you to the normal Greeter. Which it should not as it is not necessary.

    So to continue what instead happens is that first the screensaver password prompt appears, then returns you to the Greeter to input your credentials 2X or even 3X.
    Eventually, you get to log in. That is what I think is happening.

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

  • @Modisc
    Sorry for the delay in getting back to you. Forums seemed to be down yesterday and didn’t get chance check other stuff on the laptop. But things seem to be back to normal now after the latest batch of updates. Glad things seem to be resolved, wasn’t looking forward to going back to lightdm. I switched to gdm since I had some issues with lightdm (black screen) and have seen quite a few posts by others who have had issues with lightdm. Thanks again for all of your help!

  • @bazini2880
    no problem about delay due to forums being down.
    good that things are resolved for you now.

    Download " antergos-wallpapers-extra " and enjoy community sponsored wallpapers.

    Use the "Linux Beginner Search Engine"

    https://cse.google.com/cse/home?cx=017607476515012185699:b_owgx6xyi0

Posts 14Views 2119
Log in to reply