• Knowing the serial number of a hardware part by console...


    Something like this:

    *ATAPI CD-ROM, with removable media
    Model Number: SONY CD-RW CRX320EE
    Serial Number: 2005042200050126
    Firmware Revision: RYK1
    Standards:
    Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
    Supported: CD-ROM ATAPI-2
    Configuration:
    DRQ response: 50us.
    Packet size: 12 bytes
    Capabilities:
    LBA, IORDY(cannot be disabled)
    DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=227ns IORDY flow control=120ns*
    

    There is a way to know the serial number of my CD-ROM? the hdparm command does not work :(

    Antergos Gnome - Lenovo G4070
    Antergos XFCE (Ex-Mate) - Dell D630
    Antergos Cinnamon - Asus E-11
    Puppy Linux Precise 5.7.1 - Asus 701 EEEpc
    Puppy Linux Lxpuptahr USB live - All machines

  • Shame on me…installed hdparm and later with hdparm -i /dev/sr0, i got this

    Model=MATSHITA DVD-RAM UJ8FBS, FwRev=F801, SerialNo=8SSDX0E66033P1CC51X2
     Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
     RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
     BuffType=unknown, BuffSize=unknown, MaxMultSect=0
     (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
     IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
     PIO modes:  pio0 pio1 pio2 pio3 pio4 
     DMA modes:  mdma0 mdma1 mdma2 
     UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 
     AdvancedPM=no
     Drive conforms to: Unspecified:  ATA/ATAPI-3,4,5,6,7
    

    That´s that :D

    Antergos Gnome - Lenovo G4070
    Antergos XFCE (Ex-Mate) - Dell D630
    Antergos Cinnamon - Asus E-11
    Puppy Linux Precise 5.7.1 - Asus 701 EEEpc
    Puppy Linux Lxpuptahr USB live - All machines

hardware9 serial number1 Posts 2Views 544
Log in to reply