• Card-Reader problem | 02 Micro


    I got another issue. Upon startup, I got the following message:
    mmc0: Unknown controller version (3). You may experience problems.

    The Card-Reader is working with “ordinary” SD-Cards. But MicroSD for example isn´t working.

    Searching the net, I found the following: https://bugs.archlinux.org/task/38628

    I*ve issued the command and I got the following:

    [[email protected] ~]$ dmesg | grep mmc
    [ 0.364155] mmc0: Unknown controller version (3). You may experience problems.
    [ 0.364212] sdhci-pci 0000:03:00.0: No vmmc regulator found
    [ 0.364214] sdhci-pci 0000:03:00.0: No vqmmc regulator found
    [ 0.367979] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA

    On this sited they mention something like a patch… how can I apply that patch? I can´t see the solution to it…

    Thank you again for your support!

  • @skydesigner

    create a files /etc/modprobe.d/sdhci_pci.conf

    sudo nano  /etc/modprobe.d/sdhci_pci.conf 

    add this lint to the blank file:

    options sdhci debug_quirks2="0x10000"

    save the file and unload the modules sdhci_pci sdhci_acpi sdhci

    sudo rmmod sdhci_pci sdhci_acpi sdhci 

    then load sdhce_pci module, it should make the card reader work ok.

    sudo modprobe sdhci_pci

    In order for make it work automatically after boot do sudo mkinitcpio -p linux

dell29 e74401 mmc01 o2 micro1 Posts 2Views 1765
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.