• Keyboard suddenly stops working...


    …and start after 2-4 seconds again to work completely correct.

    Its everywhere, suddenly and not reproducable.

    Its annoying, I am a online jounalist, and sometimes words are missing and I have to check three times or more. In Steam games, like CS, I suddenly stand still. In matches its not that good.

    I already tried other keyboards and other USB ports. Same.
    I first encountered this with OB. With XFCE everything was fine, I think.

    Anyone dealt with that before?

  • …and start after 2-4 seconds again to work completely correct.

    Its everywhere, suddenly and not reproducable.

    Its annoying, I am a online jounalist, and sometimes words are missing and I have to check three times or more. In Steam games, like CS, I suddenly stand still. In matches its not that good.

    I already tried other keyboards and other USB ports. Same.
    I first encountered this with OB. With XFCE everything was fine, I think.

    Anyone dealt with that before?

  • Hi,

    You really have bad luck… seems to me that everything bad that can happen to you is really happening to you.

    Anyway, it makes no sense that everything was ok with XFCE, and with openbox, that is lighter, you have performance issues…

    Ok, could you put here the result of running the dmesg command? (run it in a terminal).

    Also, I don’t think it’s really your problem, but you coud try create a /etc/X11/xorg.conf file with these contents:

      
    Section "ServerFlags"  
    Option "AutoAddDevices" "true"  
    Option "AllowEmptyInput" "no"  
    EndSection  
    
    

    It could be something about your USB ports that openbox does not handle and with XFCE there was some service that was handling it, i really don’t know. Post here your dmesg result to show if the kernel is complaining about something.

    Cheers!

  • Oh I forgot… there has been a kernel update recently, so we’re using now linux kernel 3.17

    Maybe that’s your problem… and it has nothing to do with XFCE/Openbox…

    You could try to run the lts kernel to see if it helps or not…

  • Well bad luck, maybe, but anyone has to be the one. Its just my private gaming PC, if I want a slow “everything” linux, I’d stick with *buntu, but without pacman and fast arch subsystem I’ll become a hater soon. ;)

    dmesg (damn long)

      
    [ 0.000000] Initializing cgroup subsys cpuset  
    [ 0.000000] Initializing cgroup subsys cpu  
    [ 0.000000] Initializing cgroup subsys cpuacct  
    [ 0.000000] Linux version 3.17.1-1-ARCH ([email protected]\_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) \#1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014  
    [ 0.000000] Command line: BOOT\_IMAGE=/vmlinuz-linux root=UUID=a5b18d3a-d048-46c4-8293-9f444c97bac5 rw resume=UUID=24ca1db5-9c4f-4dcc-99f6-54158c48c678 quiet  
    [ 0.000000] e820: BIOS-provided physical RAM map:  
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable  
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cb88dfff] usable  
    [ 0.000000] BIOS-e820: [mem 0x00000000cb88e000-0x00000000cb894fff] ACPI NVS  
    [ 0.000000] BIOS-e820: [mem 0x00000000cb895000-0x00000000cbcd7fff] usable  
    [ 0.000000] BIOS-e820: [mem 0x00000000cbcd8000-0x00000000cc268fff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000cc269000-0x00000000dda86fff] usable  
    [ 0.000000] BIOS-e820: [mem 0x00000000dda87000-0x00000000dde42fff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000dde43000-0x00000000dde92fff] usable  
    [ 0.000000] BIOS-e820: [mem 0x00000000dde93000-0x00000000ddfc7fff] ACPI NVS  
    [ 0.000000] BIOS-e820: [mem 0x00000000ddfc8000-0x00000000deffefff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable  
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved  
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable  
    [ 0.000000] NX (Execute Disable) protection: active  
    [ 0.000000] SMBIOS 2.8 present.  
    [ 0.000000] DMI: MSI MS-7817/B85M-E45 (MS-7817), BIOS V10.6 07/01/2014  
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==\> reserved  
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable  
    [ 0.000000] AGP: No AGP bridge found  
    [ 0.000000] e820: last\_pfn = 0x41e000 max\_arch\_pfn = 0x400000000  
    [ 0.000000] MTRR default type: uncachable  
    [ 0.000000] MTRR fixed ranges enabled:  
    [ 0.000000] 00000-9FFFF write-back  
    [ 0.000000] A0000-BFFFF uncachable  
    [ 0.000000] C0000-CFFFF write-protect  
    [ 0.000000] D0000-E7FFF uncachable  
    [ 0.000000] E8000-FFFFF write-protect  
    [ 0.000000] MTRR variable ranges enabled:  
    [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back  
    [ 0.000000] 1 base 0400000000 mask 7FF0000000 write-back  
    [ 0.000000] 2 base 0410000000 mask 7FF8000000 write-back  
    [ 0.000000] 3 base 0418000000 mask 7FFC000000 write-back  
    [ 0.000000] 4 base 041C000000 mask 7FFE000000 write-back  
    [ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable  
    [ 0.000000] 6 disabled  
    [ 0.000000] 7 disabled  
    [ 0.000000] 8 disabled  
    [ 0.000000] 9 disabled  
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106  
    [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==\> reserved  
    [ 0.000000] e820: last\_pfn = 0xdf000 max\_arch\_pfn = 0x400000000  
    [ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]  
    [ 0.000000] Scanning 1 areas for low memory corruption  
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576  
    [ 0.000000] Using GB pages for direct mapping  
    [ 0.000000] init\_memory\_mapping: [mem 0x00000000-0x000fffff]  
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k  
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE  
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE  
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE  
    [ 0.000000] init\_memory\_mapping: [mem 0x41de00000-0x41dffffff]  
    [ 0.000000] [mem 0x41de00000-0x41dffffff] page 2M  
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE  
    [ 0.000000] init\_memory\_mapping: [mem 0x41c000000-0x41ddfffff]  
    [ 0.000000] [mem 0x41c000000-0x41ddfffff] page 2M  
    [ 0.000000] init\_memory\_mapping: [mem 0x400000000-0x41bffffff]  
    [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M  
    [ 0.000000] init\_memory\_mapping: [mem 0x00100000-0xcb88dfff]  
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k  
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M  
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G  
    [ 0.000000] [mem 0xc0000000-0xcb7fffff] page 2M  
    [ 0.000000] [mem 0xcb800000-0xcb88dfff] page 4k  
    [ 0.000000] init\_memory\_mapping: [mem 0xcb895000-0xcbcd7fff]  
    [ 0.000000] [mem 0xcb895000-0xcb9fffff] page 4k  
    [ 0.000000] [mem 0xcba00000-0xcbbfffff] page 2M  
    [ 0.000000] [mem 0xcbc00000-0xcbcd7fff] page 4k  
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE  
    [ 0.000000] init\_memory\_mapping: [mem 0xcc269000-0xdda86fff]  
    [ 0.000000] [mem 0xcc269000-0xcc3fffff] page 4k  
    [ 0.000000] [mem 0xcc400000-0xdd9fffff] page 2M  
    [ 0.000000] [mem 0xdda00000-0xdda86fff] page 4k  
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE  
    [ 0.000000] init\_memory\_mapping: [mem 0xdde43000-0xdde92fff]  
    [ 0.000000] [mem 0xdde43000-0xdde92fff] page 4k  
    [ 0.000000] init\_memory\_mapping: [mem 0xdefff000-0xdeffffff]  
    [ 0.000000] [mem 0xdefff000-0xdeffffff] page 4k  
    [ 0.000000] init\_memory\_mapping: [mem 0x100000000-0x3ffffffff]  
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G  
    [ 0.000000] RAMDISK: [mem 0x379a8000-0x37ccbfff]  
    [ 0.000000] ACPI: Early table checksum verification disabled  
    [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)  
    [ 0.000000] ACPI: XSDT 0x00000000DDF97080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)  
    [ 0.000000] ACPI: FACP 0x00000000DDFA60F0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)  
    [ 0.000000] ACPI: DSDT 0x00000000DDF97190 00EF5E (v02 ALASKA A M I 00000036 INTL 20120711)  
    [ 0.000000] ACPI: FACS 0x00000000DDFC7F80 000040  
    [ 0.000000] ACPI: APIC 0x00000000DDFA6200 000072 (v03 ALASKA A M I 01072009 AMI 00010013)  
    [ 0.000000] ACPI: FPDT 0x00000000DDFA6278 000044 (v01 ALASKA A M I 01072009 AMI 00010013)  
    [ 0.000000] ACPI: SSDT 0x00000000DDFA62C0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)  
    [ 0.000000] ACPI: MCFG 0x00000000DDFA6D98 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)  
    [ 0.000000] ACPI: HPET 0x00000000DDFA6DD8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)  
    [ 0.000000] ACPI: SSDT 0x00000000DDFA6E10 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)  
    [ 0.000000] ACPI: SSDT 0x00000000DDFA7180 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)  
    [ 0.000000] ACPI: ASF! 0x00000000DDFAA6A8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)  
    [ 0.000000] ACPI: DMAR 0x00000000DDFAA750 000080 (v01 INTEL HSW 00000001 INTL 00000001)  
    [ 0.000000] ACPI: SSDT 0x00000000DDFAA7D0 000A26 (v01 Intel\_ IsctTabl 00001000 INTL 20120711)  
    [ 0.000000] ACPI: Local APIC address 0xfee00000  
    [ 0.000000] No NUMA configuration found  
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041dffffff]  
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41dffffff]  
    [ 0.000000] NODE\_DATA [mem 0x41dff7000-0x41dffafff]  
    [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -\> [ffff88040d600000-ffff88041d5fffff] on node 0  
    [ 0.000000] Zone ranges:  
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]  
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]  
    [ 0.000000] Normal [mem 0x100000000-0x41dffffff]  
    [ 0.000000] Movable zone start for each node  
    [ 0.000000] Early memory node ranges  
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]  
    [ 0.000000] node 0: [mem 0x00100000-0xcb88dfff]  
    [ 0.000000] node 0: [mem 0xcb895000-0xcbcd7fff]  
    [ 0.000000] node 0: [mem 0xcc269000-0xdda86fff]  
    [ 0.000000] node 0: [mem 0xdde43000-0xdde92fff]  
    [ 0.000000] node 0: [mem 0xdefff000-0xdeffffff]  
    [ 0.000000] node 0: [mem 0x100000000-0x41dffffff]  
    [ 0.000000] On node 0 totalpages: 4175068  
    [ 0.000000] DMA zone: 64 pages used for memmap  
    [ 0.000000] DMA zone: 21 pages reserved  
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0  
    [ 0.000000] DMA32 zone: 14101 pages used for memmap  
    [ 0.000000] DMA32 zone: 902464 pages, LIFO batch:31  
    [ 0.000000] Normal zone: 51072 pages used for memmap  
    [ 0.000000] Normal zone: 3268608 pages, LIFO batch:31  
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808  
    [ 0.000000] ACPI: Local APIC address 0xfee00000  
    [ 0.000000] ACPI: LAPIC (acpi\_id[0x01] lapic\_id[0x00] enabled)  
    [ 0.000000] ACPI: LAPIC (acpi\_id[0x02] lapic\_id[0x02] enabled)  
    [ 0.000000] ACPI: LAPIC (acpi\_id[0x03] lapic\_id[0x04] enabled)  
    [ 0.000000] ACPI: LAPIC (acpi\_id[0x04] lapic\_id[0x06] enabled)  
    [ 0.000000] ACPI: LAPIC\_NMI (acpi\_id[0xff] high edge lint[0x1])  
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi\_base[0])  
    [ 0.000000] IOAPIC[0]: apic\_id 8, version 32, address 0xfec00000, GSI 0-23  
    [ 0.000000] ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 0 global\_irq 2 dfl dfl)  
    [ 0.000000] ACPI: INT\_SRC\_OVR (bus 0 bus\_irq 9 global\_irq 9 high level)  
    [ 0.000000] ACPI: IRQ0 used by override.  
    [ 0.000000] ACPI: IRQ9 used by override.  
    [ 0.000000] Using ACPI (MADT) for SMP configuration information  
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000  
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs  
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb88e000-0xcb894fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xcbcd8000-0xcc268fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xdda87000-0xdde42fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xdde93000-0xddfc7fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xddfc8000-0xdeffefff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]  
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]  
    [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices  
    [ 0.000000] Booting paravirtualized kernel on bare hardware  
    [ 0.000000] setup\_percpu: NR\_CPUS:128 nr\_cpumask\_bits:128 nr\_cpu\_ids:4 nr\_node\_ids:1  
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041dc00000 s86848 r8192 d23744 u524288  
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1\*2097152  
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3   
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4109810  
    [ 0.000000] Policy zone: Normal  
    [ 0.000000] Kernel command line: BOOT\_IMAGE=/vmlinuz-linux root=UUID=a5b18d3a-d048-46c4-8293-9f444c97bac5 rw resume=UUID=24ca1db5-9c4f-4dcc-99f6-54158c48c678 quiet  
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)  
    [ 0.000000] xsave: enabled xstate\_bv 0x7, cntxt size 0x340 using standard form  
    [ 0.000000] AGP: Checking aperture...  
    [ 0.000000] AGP: No AGP bridge found  
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area  
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!  
    [ 0.000000] Memory: 16356544K/16700272K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 343728K reserved)  
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1  
    [ 0.000000] Preemptible hierarchical RCU implementation.  
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.  
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.  
    [ 0.000000] RCU restricting CPUs from NR\_CPUS=128 to nr\_cpu\_ids=4\.  
    [ 0.000000] RCU: Adjusting geometry for rcu\_fanout\_leaf=16, nr\_cpu\_ids=4  
    [ 0.000000] NR\_IRQS:8448 nr\_irqs:456 0  
    [ 0.000000] Console: colour dummy device 80x25  
    [ 0.000000] console [tty0] enabled  
    [ 0.000000] allocated 67108864 bytes of page\_cgroup  
    [ 0.000000] please try 'cgroup\_disable=memory' option if you don't want memory cgroups  
    [ 0.000000] hpet clockevent registered  
    [ 0.000000] tsc: Fast TSC calibration using PIT  
    [ 0.000000] tsc: Detected 3500.304 MHz processor  
    [ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 7003.30 BogoMIPS (lpj=11667680)  
    [ 0.000021] pid\_max: default: 32768 minimum: 301  
    [ 0.000025] ACPI: Core revision 20140724  
    [ 0.007334] ACPI: All ACPI Tables successfully acquired  
    [ 0.024788] Security Framework initialized  
    [ 0.024793] Yama: becoming mindful.  
    [ 0.025426] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)  
    [ 0.027433] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)  
    [ 0.028286] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)  
    [ 0.028297] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)  
    [ 0.028454] Initializing cgroup subsys memory  
    [ 0.028457] Initializing cgroup subsys devices  
    [ 0.028459] Initializing cgroup subsys freezer  
    [ 0.028460] Initializing cgroup subsys net\_cls  
    [ 0.028462] Initializing cgroup subsys blkio  
    [ 0.028476] CPU: Physical Processor ID: 0  
    [ 0.028476] CPU: Processor Core ID: 0  
    [ 0.029213] mce: CPU supports 9 MCE banks  
    [ 0.029222] CPU0: Thermal monitoring enabled (TM1)  
    [ 0.029231] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024  
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4  
    [ 0.029297] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)  
    [ 0.029813] ftrace: allocating 20674 entries in 81 pages  
    [ 0.035635] dmar: Host address width 39  
    [ 0.035637] dmar: DRHD base: 0x000000fed90000 flags: 0x1  
    [ 0.035642] dmar: IOMMU 0: reg\_base\_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da  
    [ 0.035643] dmar: RMRR base: 0x000000deea4000 end: 0x000000deeb2fff  
    [ 0.035707] IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0  
    [ 0.035708] HPET id 0 under DRHD base 0xfed90000  
    [ 0.035708] Queued invalidation will be enabled to support x2apic and Intr-remapping.  
    [ 0.035762] Enabled IRQ remapping in x2apic mode  
    [ 0.035763] Enabling x2apic  
    [ 0.035763] Enabled x2apic  
    [ 0.035767] Switched APIC routing to cluster x2apic.  
    [ 0.036167] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1  
    [ 0.069222] smpboot: CPU0: Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)  
    [ 0.069226] TSC deadline timer enabled  
    [ 0.069240] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.  
    [ 0.069254] ... version: 3  
    [ 0.069254] ... bit width: 48  
    [ 0.069255] ... generic registers: 8  
    [ 0.069255] ... value mask: 0000ffffffffffff  
    [ 0.069256] ... max period: 0000ffffffffffff  
    [ 0.069256] ... fixed-purpose events: 3  
    [ 0.069257] ... event mask: 00000007000000ff  
    [ 0.092630] x86: Booting SMP configuration:  
    [ 0.092632] .... node \#0, CPUs: \#1  
    [ 0.106507] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.  
    [ 0.113179] \#2 \#3  
    [ 0.147573] x86: Booted up 1 node, 4 CPUs  
    [ 0.147575] smpboot: Total of 4 processors activated (28013.20 BogoMIPS)  
    [ 0.149971] devtmpfs: initialized  
    [ 0.151878] PM: Registering ACPI NVS region [mem 0xcb88e000-0xcb894fff] (28672 bytes)  
    [ 0.151879] PM: Registering ACPI NVS region [mem 0xdde93000-0xddfc7fff] (1265664 bytes)  
    [ 0.152371] pinctrl core: initialized pinctrl subsystem  
    [ 0.152401] RTC time: 21:03:55, date: 10/27/14  
    [ 0.152459] NET: Registered protocol family 16  
    [ 0.152527] cpuidle: using governor ladder  
    [ 0.152528] cpuidle: using governor menu  
    [ 0.152546] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it  
    [ 0.152547] ACPI: bus type PCI registered  
    [ 0.152548] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5  
    [ 0.152594] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)  
    [ 0.152595] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820  
    [ 0.152647] PCI: Using configuration type 1 for base access  
    [ 0.167799] ACPI: Added \_OSI(Module Device)  
    [ 0.167800] ACPI: Added \_OSI(Processor Device)  
    [ 0.167801] ACPI: Added \_OSI(3.0 \_SCP Extensions)  
    [ 0.167801] ACPI: Added \_OSI(Processor Aggregator Device)  
    [ 0.170284] ACPI: Executed 1 blocks of module-level executable AML code  
    [ 0.171830] [Firmware Bug]: ACPI: BIOS \_OSI(Linux) query ignored  
    [ 0.172266] ACPI: Dynamic OEM Table Load:  
    [ 0.172270] ACPI: SSDT 0xFFFF880407248800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)  
    [ 0.184433] ACPI: Dynamic OEM Table Load:  
    [ 0.184436] ACPI: SSDT 0xFFFF8804071F1C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)  
    [ 0.194711] ACPI: Interpreter enabled  
    [ 0.194716] ACPI Exception: AE\_NOT\_FOUND, While evaluating Sleep State [\\\_S1\_] (20140724/hwxface-580)  
    [ 0.194719] ACPI Exception: AE\_NOT\_FOUND, While evaluating Sleep State [\\\_S2\_] (20140724/hwxface-580)  
    [ 0.194732] ACPI: (supports S0 S3 S4 S5)  
    [ 0.194733] ACPI: Using IOAPIC for interrupt routing  
    [ 0.194751] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug  
    [ 0.199849] ACPI: Power Resource [FN00] (off)  
    [ 0.199892] ACPI: Power Resource [FN01] (off)  
    [ 0.199935] ACPI: Power Resource [FN02] (off)  
    [ 0.199977] ACPI: Power Resource [FN03] (off)  
    [ 0.200019] ACPI: Power Resource [FN04] (off)  
    [ 0.200476] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])  
    [ 0.200479] acpi PNP0A08:00: \_OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]  
    [ 0.200617] acpi PNP0A08:00: \_OSC: platform does not support [PCIeHotplug PME]  
    [ 0.200690] acpi PNP0A08:00: \_OSC: OS now controls [AER PCIeCapability]  
    [ 0.201016] PCI host bridge to bus 0000:00  
    [ 0.201017] pci\_bus 0000:00: root bus resource [bus 00-3e]  
    [ 0.201019] pci\_bus 0000:00: root bus resource [io 0x0000-0x0cf7]  
    [ 0.201020] pci\_bus 0000:00: root bus resource [io 0x0d00-0xffff]  
    [ 0.201021] pci\_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]  
    [ 0.201021] pci\_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]  
    [ 0.201022] pci\_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]  
    [ 0.201023] pci\_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]  
    [ 0.201024] pci\_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]  
    [ 0.201025] pci\_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]  
    [ 0.201026] pci\_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]  
    [ 0.201027] pci\_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]  
    [ 0.201032] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000  
    [ 0.201085] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400  
    [ 0.201108] pci 0000:00:01.0: PME\# supported from D0 D3hot D3cold  
    [ 0.201137] pci 0000:00:01.0: System wakeup disabled by ACPI  
    [ 0.201185] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330  
    [ 0.201202] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]  
    [ 0.201252] pci 0000:00:14.0: PME\# supported from D3hot D3cold  
    [ 0.201275] pci 0000:00:14.0: System wakeup disabled by ACPI  
    [ 0.201302] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000  
    [ 0.201318] pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]  
    [ 0.201371] pci 0000:00:16.0: PME\# supported from D0 D3hot D3cold  
    [ 0.201426] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320  
    [ 0.201444] pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]  
    [ 0.201519] pci 0000:00:1a.0: PME\# supported from D0 D3hot D3cold  
    [ 0.201551] pci 0000:00:1a.0: System wakeup disabled by ACPI  
    [ 0.201579] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300  
    [ 0.201592] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]  
    [ 0.201651] pci 0000:00:1b.0: PME\# supported from D0 D3hot D3cold  
    [ 0.201676] pci 0000:00:1b.0: System wakeup disabled by ACPI  
    [ 0.201700] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400  
    [ 0.201757] pci 0000:00:1c.0: PME\# supported from D0 D3hot D3cold  
    [ 0.201782] pci 0000:00:1c.0: System wakeup disabled by ACPI  
    [ 0.201807] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400  
    [ 0.201864] pci 0000:00:1c.2: PME\# supported from D0 D3hot D3cold  
    [ 0.201889] pci 0000:00:1c.2: System wakeup disabled by ACPI  
    [ 0.201913] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401  
    [ 0.201970] pci 0000:00:1c.3: PME\# supported from D0 D3hot D3cold  
    [ 0.201996] pci 0000:00:1c.3: System wakeup disabled by ACPI  
    [ 0.202026] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320  
    [ 0.202043] pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]  
    [ 0.202118] pci 0000:00:1d.0: PME\# supported from D0 D3hot D3cold  
    [ 0.202151] pci 0000:00:1d.0: System wakeup disabled by ACPI  
    [ 0.202179] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100  
    [ 0.202310] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601  
    [ 0.202323] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]  
    [ 0.202329] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]  
    [ 0.202335] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]  
    [ 0.202341] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]  
    [ 0.202346] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]  
    [ 0.202352] pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]  
    [ 0.202383] pci 0000:00:1f.2: PME\# supported from D3hot  
    [ 0.202425] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500  
    [ 0.202437] pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]  
    [ 0.202454] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]  
    [ 0.202533] pci 0000:01:00.0: [10de:1381] type 00 class 0x030000  
    [ 0.202542] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]  
    [ 0.202551] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]  
    [ 0.202559] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]  
    [ 0.202565] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]  
    [ 0.202571] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]  
    [ 0.202619] pci 0000:01:00.0: System wakeup disabled by ACPI  
    [ 0.202644] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300  
    [ 0.202653] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]  
    [ 0.207687] pci 0000:00:01.0: PCI bridge to [bus 01]  
    [ 0.207689] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]  
    [ 0.207690] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]  
    [ 0.207693] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]  
    [ 0.207745] acpiphp: Slot [1] registered  
    [ 0.207749] pci 0000:00:1c.0: PCI bridge to [bus 02]  
    [ 0.207818] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000  
    [ 0.207836] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]  
    [ 0.207862] pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]  
    [ 0.207878] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]  
    [ 0.207964] pci 0000:03:00.0: supports D1 D2  
    [ 0.207965] pci 0000:03:00.0: PME\# supported from D0 D1 D2 D3hot D3cold  
    [ 0.207993] pci 0000:03:00.0: System wakeup disabled by ACPI  
    [ 0.214369] pci 0000:00:1c.2: PCI bridge to [bus 03]  
    [ 0.214371] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]  
    [ 0.214374] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]  
    [ 0.214379] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]  
    [ 0.214445] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400  
    [ 0.214574] pci 0000:04:00.0: supports D1 D2  
    [ 0.214575] pci 0000:04:00.0: PME\# supported from D0 D1 D2 D3hot D3cold  
    [ 0.214600] pci 0000:04:00.0: System wakeup disabled by ACPI  
    [ 0.221044] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)  
    [ 0.221052] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)  
    [ 0.221053] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)  
    [ 0.221054] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)  
    [ 0.221054] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)  
    [ 0.221055] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)  
    [ 0.221056] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)  
    [ 0.221057] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)  
    [ 0.221058] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)  
    [ 0.221059] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)  
    [ 0.221060] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)  
    [ 0.221185] pci 0000:04:00.0: PCI bridge to [bus 05]  
    [ 0.221229] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)  
    [ 0.221691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 \*11 12 14 15)  
    [ 0.221720] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 \*10 11 12 14 15)  
    [ 0.221748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 \*10 11 12 14 15)  
    [ 0.221776] ACPI: PCI Interrupt Link [LNKD] (IRQs \*3 4 5 6 10 11 12 14 15)  
    [ 0.221804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) \*0, disabled.  
    [ 0.221832] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) \*0, disabled.  
    [ 0.221861] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 \*11 12 14 15)  
    [ 0.221889] ACPI: PCI Interrupt Link [LNKH] (IRQs \*3 4 5 6 10 11 12 14 15)  
    [ 0.222074] ACPI: Enabled 4 GPEs in block 00 to 3F  
    [ 0.222136] vgaarb: setting as boot device: PCI:0000:01:00.0  
    [ 0.222138] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none  
    [ 0.222139] vgaarb: loaded  
    [ 0.222139] vgaarb: bridge control possible 0000:01:00.0  
    [ 0.222163] PCI: Using ACPI for IRQ routing  
    [ 0.223321] PCI: pci\_cache\_line\_size set to 64 bytes  
    [ 0.223362] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]  
    [ 0.223363] e820: reserve RAM buffer [mem 0xcb88e000-0xcbffffff]  
    [ 0.223364] e820: reserve RAM buffer [mem 0xcbcd8000-0xcbffffff]  
    [ 0.223364] e820: reserve RAM buffer [mem 0xdda87000-0xdfffffff]  
    [ 0.223365] e820: reserve RAM buffer [mem 0xdde93000-0xdfffffff]  
    [ 0.223366] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]  
    [ 0.223367] e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff]  
    [ 0.223426] NetLabel: Initializing  
    [ 0.223427] NetLabel: domain hash size = 128  
    [ 0.223427] NetLabel: protocols = UNLABELED CIPSOv4  
    [ 0.223434] NetLabel: unlabeled traffic allowed by default  
    [ 0.223449] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0  
    [ 0.223452] hpet0: 8 comparators, 64-bit 14.318180 MHz counter  
    [ 0.225474] Switched to clocksource hpet  
    [ 0.228416] pnp: PnP ACPI init  
    [ 0.228466] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved  
    [ 0.228468] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)  
    [ 0.228571] system 00:01: [io 0x0680-0x069f] has been reserved  
    [ 0.228572] system 00:01: [io 0xffff] has been reserved  
    [ 0.228573] system 00:01: [io 0xffff] has been reserved  
    [ 0.228574] system 00:01: [io 0xffff] has been reserved  
    [ 0.228575] system 00:01: [io 0x1c00-0x1cfe] has been reserved  
    [ 0.228576] system 00:01: [io 0x1d00-0x1dfe] has been reserved  
    [ 0.228577] system 00:01: [io 0x1e00-0x1efe] has been reserved  
    [ 0.228578] system 00:01: [io 0x1f00-0x1ffe] has been reserved  
    [ 0.228579] system 00:01: [io 0x1800-0x18fe] could not be reserved  
    [ 0.228580] system 00:01: [io 0x164e-0x164f] has been reserved  
    [ 0.228582] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)  
    [ 0.228600] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)  
    [ 0.228627] system 00:03: [io 0x1854-0x1857] has been reserved  
    [ 0.228629] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)  
    [ 0.228689] system 00:04: [io 0x0a00-0x0a0f] has been reserved  
    [ 0.228690] system 00:04: [io 0x0a10-0x0a1f] has been reserved  
    [ 0.228691] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)  
    [ 0.228782] pnp 00:05: [dma 0 disabled]  
    [ 0.228807] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)  
    [ 0.228957] pnp 00:06: [dma 0 disabled]  
    [ 0.229008] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)  
    [ 0.229035] system 00:07: [io 0x04d0-0x04d1] has been reserved  
    [ 0.229036] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)  
    [ 0.229303] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved  
    [ 0.229305] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved  
    [ 0.229306] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved  
    [ 0.229308] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved  
    [ 0.229309] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved  
    [ 0.229310] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved  
    [ 0.229313] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved  
    [ 0.229314] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved  
    [ 0.229316] system 00:08: [mem 0xff000000-0xffffffff] has been reserved  
    [ 0.229317] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved  
    [ 0.229318] system 00:08: [mem 0xf7fee000-0xf7feefff] has been reserved  
    [ 0.229319] system 00:08: [mem 0xf7fd0000-0xf7fdffff] has been reserved  
    [ 0.229321] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)  
    [ 0.229456] pnp: PnP ACPI: found 9 devices  
    [ 0.235260] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add\_size 1000  
    [ 0.235262] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add\_size 200000  
    [ 0.235263] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add\_size 200000  
    [ 0.235285] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get\_res\_add\_size add\_size 200000  
    [ 0.235287] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get\_res\_add\_size add\_size 200000  
    [ 0.235288] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get\_res\_add\_size add\_size 1000  
    [ 0.235291] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]  
    [ 0.235295] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]  
    [ 0.235297] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]  
    [ 0.235299] pci 0000:00:01.0: PCI bridge to [bus 01]  
    [ 0.235300] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]  
    [ 0.235302] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]  
    [ 0.235304] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]  
    [ 0.235306] pci 0000:00:1c.0: PCI bridge to [bus 02]  
    [ 0.235308] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]  
    [ 0.235312] pci 0000:00:1c.0: bridge window [mem 0xf2200000-0xf23fffff]  
    [ 0.235315] pci 0000:00:1c.0: bridge window [mem 0xf2400000-0xf25fffff 64bit pref]  
    [ 0.235319] pci 0000:00:1c.2: PCI bridge to [bus 03]  
    [ 0.235321] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]  
    [ 0.235325] pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]  
    [ 0.235327] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]  
    [ 0.235332] pci 0000:04:00.0: PCI bridge to [bus 05]  
    [ 0.235348] pci 0000:00:1c.3: PCI bridge to [bus 04-05]  
    [ 0.235356] pci\_bus 0000:00: resource 4 [io 0x0000-0x0cf7]  
    [ 0.235357] pci\_bus 0000:00: resource 5 [io 0x0d00-0xffff]  
    [ 0.235358] pci\_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]  
    [ 0.235359] pci\_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]  
    [ 0.235360] pci\_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]  
    [ 0.235361] pci\_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]  
    [ 0.235362] pci\_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]  
    [ 0.235363] pci\_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]  
    [ 0.235364] pci\_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]  
    [ 0.235365] pci\_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]  
    [ 0.235366] pci\_bus 0000:01: resource 0 [io 0xe000-0xefff]  
    [ 0.235367] pci\_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]  
    [ 0.235367] pci\_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]  
    [ 0.235369] pci\_bus 0000:02: resource 0 [io 0x2000-0x2fff]  
    [ 0.235369] pci\_bus 0000:02: resource 1 [mem 0xf2200000-0xf23fffff]  
    [ 0.235370] pci\_bus 0000:02: resource 2 [mem 0xf2400000-0xf25fffff 64bit pref]  
    [ 0.235371] pci\_bus 0000:03: resource 0 [io 0xd000-0xdfff]  
    [ 0.235372] pci\_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]  
    [ 0.235373] pci\_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]  
    [ 0.235374] pci\_bus 0000:04: resource 4 [io 0x0000-0x0cf7]  
    [ 0.235375] pci\_bus 0000:04: resource 5 [io 0x0d00-0xffff]  
    [ 0.235376] pci\_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]  
    [ 0.235377] pci\_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]  
    [ 0.235377] pci\_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]  
    [ 0.235378] pci\_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]  
    [ 0.235379] pci\_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]  
    [ 0.235380] pci\_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]  
    [ 0.235381] pci\_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]  
    [ 0.235382] pci\_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff]  
    [ 0.235397] NET: Registered protocol family 2  
    [ 0.235537] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)  
    [ 0.235669] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)  
    [ 0.235763] TCP: Hash tables configured (established 131072 bind 65536)  
    [ 0.235774] TCP: reno registered  
    [ 0.235784] UDP hash table entries: 8192 (order: 6, 262144 bytes)  
    [ 0.235818] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)  
    [ 0.235864] NET: Registered protocol family 1  
    [ 0.236162] pci 0000:01:00.0: Video device with shadowed ROM  
    [ 0.236175] PCI: CLS 64 bytes, default 64  
    [ 0.236201] Unpacking initramfs...  
    [ 0.270503] Freeing initrd memory: 3216K (ffff8800379a8000 - ffff880037ccc000)  
    [ 0.270521] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)  
    [ 0.270522] software IO TLB [mem 0xd9a87000-0xdda87000] (64MB) mapped at [ffff8800d9a87000-ffff8800dda86fff]  
    [ 0.270663] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer  
    [ 0.270688] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x19  
    [ 0.270692] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x19  
    [ 0.270698] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x19  
    [ 0.270703] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x19  
    [ 0.270732] microcode: Microcode Update Driver: v2.00 <[email protected]\>, Peter Oruba  
    [ 0.270746] Scanning for low memory corruption every 60 seconds  
    [ 0.270885] futex hash table entries: 1024 (order: 4, 65536 bytes)  
    [ 0.270896] Initialise system trusted keyring  
    [ 0.271095] HugeTLB registered 2 MB page size, pre-allocated 0 pages  
    [ 0.271834] zpool: loaded  
    [ 0.271836] zbud: loaded  
    [ 0.271936] VFS: Disk quotas dquot\_6.5.2  
    [ 0.271955] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)  
    [ 0.272021] msgmni has been set to 31952  
    [ 0.272052] Key type big\_key registered  
    [ 0.272140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)  
    [ 0.272162] io scheduler noop registered  
    [ 0.272163] io scheduler deadline registered  
    [ 0.272178] io scheduler cfq registered (default)  
    [ 0.272288] pcieport 0000:00:01.0: irq 25 for MSI/MSI-X  
    [ 0.272457] pci\_hotplug: PCI Hot Plug PCI Core version: 0.5  
    [ 0.272465] pciehp: PCI Express Hot Plug Controller Driver version: 0.4  
    [ 0.272482] vesafb: mode is 1920x1200x32, linelength=7680, pages=0  
    [ 0.272483] vesafb: scrolling: redraw  
    [ 0.272484] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0  
    [ 0.272495] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90005c00000, using 9024k, total 9024k  
    [ 0.390939] Console: switching to colour frame buffer device 240x75  
    [ 0.509340] fb0: VESA VGA frame buffer device  
    [ 0.509351] intel\_idle: MWAIT substates: 0x42120  
    [ 0.509352] intel\_idle: v0.4 model 0x3C  
    [ 0.509353] intel\_idle: lapic\_timer\_reliable\_states 0xffffffff  
    [ 0.509474] GHES: HEST is not enabled!  
    [ 0.509521] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled  
    [ 0.530066] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base\_baud = 115200) is a 16550A  
    [ 0.530336] Linux agpgart interface v0.103  
    [ 0.530365] rtc\_cmos 00:02: RTC can wake from S4  
    [ 0.530463] rtc\_cmos 00:02: rtc core: registered rtc\_cmos as rtc0  
    [ 0.530488] rtc\_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs  
    [ 0.530496] Intel P-state driver initializing.  
    [ 0.530551] ledtrig-cpu: registered to indicate activity on CPUs  
    [ 0.530636] TCP: cubic registered  
    [ 0.530692] NET: Registered protocol family 10  
    [ 0.530825] NET: Registered protocol family 17  
    [ 0.531037] Loading compiled-in X.509 certificates  
    [ 0.531045] registered taskstats version 1  
    [ 0.531463] Magic number: 2:795:96  
    [ 0.531542] rtc\_cmos 00:02: setting system clock to 2014-10-27 21:03:55 UTC (1414443835)  
    [ 0.531587] PM: Checking hibernation image partition UUID=24ca1db5-9c4f-4dcc-99f6-54158c48c678  
    [ 0.531588] PM: Hibernation image not present or could not be loaded.  
    [ 0.532040] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)  
    [ 0.532041] Write protecting the kernel read-only data: 8192k  
    [ 0.533183] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)  
    [ 0.533671] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)  
    [ 0.537276] random: systemd-tmpfile urandom read with 1 bits of entropy available  
    [ 0.538036] systemd-udevd[58]: starting version 216  
    [ 0.544272] i8042: PNP: No PS/2 controller found. Probing ports directly.  
    [ 0.546382] serio: i8042 KBD port at 0x60,0x64 irq 1  
    [ 0.546444] serio: i8042 AUX port at 0x60,0x64 irq 12  
    [ 0.548076] ACPI: bus type USB registered  
    [ 0.548092] usbcore: registered new interface driver usbfs  
    [ 0.548099] usbcore: registered new interface driver hub  
    [ 0.548121] usbcore: registered new device driver usb  
    [ 0.548639] ehci\_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver  
    [ 0.548813] ehci-pci: EHCI PCI platform driver  
    [ 0.548836] SCSI subsystem initialized  
    [ 0.548912] ehci-pci 0000:00:1a.0: EHCI Host Controller  
    [ 0.548916] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1  
    [ 0.548927] ehci-pci 0000:00:1a.0: debug port 2  
    [ 0.549485] libata version 3.00 loaded.  
    [ 0.552841] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported  
    [ 0.552853] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7218000  
    [ 0.562655] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00  
    [ 0.562759] hub 1-0:1.0: USB hub found  
    [ 0.562762] hub 1-0:1.0: 2 ports detected  
    [ 0.562908] ehci-pci 0000:00:1d.0: EHCI Host Controller  
    [ 0.562911] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2  
    [ 0.562921] ehci-pci 0000:00:1d.0: debug port 2  
    [ 0.566836] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported  
    [ 0.566846] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000  
    [ 0.576015] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00  
    [ 0.576133] hub 2-0:1.0: USB hub found  
    [ 0.576136] hub 2-0:1.0: 2 ports detected  
    [ 0.576297] xhci\_hcd 0000:00:14.0: xHCI Host Controller  
    [ 0.576302] xhci\_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3  
    [ 0.576381] xhci\_hcd 0000:00:14.0: cache line size of 64 is not supported  
    [ 0.576394] xhci\_hcd 0000:00:14.0: irq 26 for MSI/MSI-X  
    [ 0.576513] hub 3-0:1.0: USB hub found  
    [ 0.576528] hub 3-0:1.0: 12 ports detected  
    [ 0.578373] xhci\_hcd 0000:00:14.0: xHCI Host Controller  
    [ 0.578376] xhci\_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4  
    [ 0.578467] hub 4-0:1.0: USB hub found  
    [ 0.578477] hub 4-0:1.0: 6 ports detected  
    [ 0.579180] ahci 0000:00:1f.2: version 3.0  
    [ 0.579255] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X  
    [ 0.579286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode  
    [ 0.579287] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst   
    [ 0.579740] scsi host0: ahci  
    [ 0.579844] scsi host1: ahci  
    [ 0.579917] scsi host2: ahci  
    [ 0.579983] scsi host3: ahci  
    [ 0.580047] scsi host4: ahci  
    [ 0.580114] scsi host5: ahci  
    [ 0.580138] ata1: SATA max UDMA/133 abar [email protected] port 0xf7216100 irq 27  
    [ 0.580138] ata2: DUMMY  
    [ 0.580139] ata3: DUMMY  
    [ 0.580140] ata4: DUMMY  
    [ 0.580140] ata5: DUMMY  
    [ 0.580141] ata6: DUMMY  
    [ 0.869815] usb 1-1: new high-speed USB device number 2 using ehci-pci  
    [ 0.899843] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)  
    [ 0.901785] ata1.00: supports DRM functions and may not be fully accessible  
    [ 0.901893] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1  
    [ 0.901895] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133  
    [ 0.901896] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA  
    [ 0.902159] ata1.00: supports DRM functions and may not be fully accessible  
    [ 0.902224] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1  
    [ 0.902226] ata1.00: configured for UDMA/133  
    [ 0.902326] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5  
    [ 0.904564] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)  
    [ 0.904655] sd 0:0:0:0: [sda] Write Protect is off  
    [ 0.904657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00  
    [ 0.904679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 0.905103] sda: sda1 sda2 sda3  
    [ 0.905340] sd 0:0:0:0: [sda] Attached SCSI disk  
    [ 0.959674] PM: Starting manual resume from disk  
    [ 0.959676] PM: Hibernation image partition 8:2 present  
    [ 0.959677] PM: Looking for hibernation image.  
    [ 0.959824] PM: Image not found (code -22)  
    [ 0.959826] PM: Hibernation image not present or could not be loaded.  
    [ 0.993962] hub 1-1:1.0: USB hub found  
    [ 0.994076] hub 1-1:1.0: 6 ports detected  
    [ 1.006143] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)  
    [ 1.100150] usb 2-1: new high-speed USB device number 2 using ehci-pci  
    [ 1.224296] hub 2-1:1.0: USB hub found  
    [ 1.224402] hub 2-1:1.0: 6 ports detected  
    [ 1.277019] tsc: Refined TSC clocksource calibration: 3499.995 MHz  
    [ 1.383908] usb 3-1: new full-speed USB device number 2 using xhci\_hcd  
    [ 1.484638] EXT4-fs (sda3): re-mounted. Opts: data=ordered  
    [ 1.544135] systemd-udevd[169]: starting version 216  
    [ 1.560176] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes  
    [ 1.721070] usb 3-2: new high-speed USB device number 3 using xhci\_hcd  
    [ 1.807219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2  
    [ 1.807222] ACPI: Power Button [PWRB]  
    [ 1.807272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3  
    [ 1.807273] ACPI: Power Button [PWRF]  
    [ 1.824597] wmi: Mapper loaded  
    [ 1.827172] mei\_me 0000:00:16.0: irq 28 for MSI/MSI-X  
    [ 1.827385] thermal LNXTHERM:00: registered as thermal\_zone0  
    [ 1.827386] ACPI: Thermal Zone [TZ00] (28 C)  
    [ 1.827504] thermal LNXTHERM:01: registered as thermal\_zone1  
    [ 1.827506] ACPI: Thermal Zone [TZ01] (30 C)  
    [ 1.832676] ACPI: Fan [FAN0] (off)  
    [ 1.832720] ACPI: Fan [FAN1] (off)  
    [ 1.832741] ACPI: Fan [FAN2] (off)  
    [ 1.832760] ACPI: Fan [FAN3] (off)  
    [ 1.832779] ACPI: Fan [FAN4] (off)  
    [ 1.833020] parport\_pc 00:06: reported by Plug and Play ACPI  
    [ 1.833064] parport0: PC-style at 0x378, irq 5 [PCSPP]  
    [ 1.833255] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4  
    [ 1.849206] input: PC Speaker as /devices/platform/pcspkr/input/input4  
    [ 1.852747] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\\\_SB\_.PCI0.SBUS.SMBI) (20140724/utaddress-258)  
    [ 1.852751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver  
    [ 1.855051] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded  
    [ 1.855056] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control  
    [ 1.857181] [drm] Initialized drm 1.1.0 20060810  
    [ 1.858498] AVX2 version of gcm\_enc/dec engaged.  
    [ 1.861614] r8169 0000:03:00.0: irq 29 for MSI/MSI-X  
    [ 1.861755] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018e2000, 44:8a:5b:cd:cf:b6, XID 0c000800 IRQ 29  
    [ 1.861757] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]  
    [ 1.863497] snd\_hda\_intel 0000:00:1b.0: irq 30 for MSI/MSI-X  
    [ 1.863557] snd\_hda\_intel 0000:01:00.1: Disabling MSI  
    [ 1.863561] snd\_hda\_intel 0000:01:00.1: Handle VGA-switcheroo audio client  
    [ 1.882204] ppdev: user-space parallel port driver  
    [ 1.883041] iTCO\_vendor\_support: vendor-support=0  
    [ 1.884786] iTCO\_wdt: Intel TCO WatchDog Timer Driver v1.11  
    [ 1.884809] iTCO\_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)  
    [ 1.885247] sound hdaudioC0D0: autoconfig: line\_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line  
    [ 1.885248] sound hdaudioC0D0: speaker\_outs=0 (0x0/0x0/0x0/0x0/0x0)  
    [ 1.885249] sound hdaudioC0D0: hp\_outs=1 (0x1b/0x0/0x0/0x0/0x0)  
    [ 1.885250] sound hdaudioC0D0: mono: mono\_out=0x0  
    [ 1.885250] sound hdaudioC0D0: inputs:  
    [ 1.885252] sound hdaudioC0D0: Front Mic=0x19  
    [ 1.885253] sound hdaudioC0D0: Rear Mic=0x18  
    [ 1.885254] sound hdaudioC0D0: Line=0x1a  
    [ 1.888895] iTCO\_wdt: initialized. heartbeat=30 sec (nowayout=0)  
    [ 1.890000] intel\_rapl: Found RAPL domain package  
    [ 1.890003] intel\_rapl: Found RAPL domain core  
    [ 1.890005] intel\_rapl: Found RAPL domain dram  
    [ 1.892404] r8169 0000:03:00.0 enp3s0: renamed from eth0  
    [ 1.895523] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6  
    [ 1.895558] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7  
    [ 1.895589] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8  
    [ 1.895627] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9  
    [ 1.895803] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10  
    [ 1.903228] hub 3-2:1.0: USB hub found  
    [ 1.903248] hub 3-2:1.0: 3 ports detected  
    [ 1.905259] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem  
    [ 1.906186] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended  
    [ 1.906266] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)  
    [ 1.908024] systemd-udevd[190]: renamed network interface eth0 to enp3s0  
    [ 1.912747] Adding 7803900k swap on /dev/sda2\. Priority:-1 extents:1 across:7803900k SSFS  
    [ 1.914796] systemd-journald[144]: Received request to flush runtime journal from PID 1  
    [ 2.000476] nvidia: module license 'NVIDIA' taints kernel.  
    [ 2.000479] Disabling lock debugging due to kernel taint  
    [ 2.005438] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem  
    [ 2.005628] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0  
    [ 2.005632] NVRM: loading NVIDIA UNIX x86\_64 Kernel Module 343.22 Thu Sep 11 16:27:43 PDT 2014  
    [ 2.061540] usb 3-3: new full-speed USB device number 4 using xhci\_hcd  
    [ 2.178576] cfg80211: Calling CRDA to update world regulatory domain  
    [ 2.188667] cfg80211: World regulatory domain updated:  
    [ 2.188670] cfg80211: DFS Master region: unset  
    [ 2.188671] cfg80211: (start\_freq - end\_freq @ bandwidth), (max\_antenna\_gain, max\_eirp), (dfs\_cac\_time)  
    [ 2.188672] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)  
    [ 2.188673] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)  
    [ 2.188674] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)  
    [ 2.188675] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)  
    [ 2.188676] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)  
    [ 2.188677] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)  
    [ 2.188677] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)  
    [ 2.188678] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)  
    [ 2.259181] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11  
    [ 2.259245] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12  
    [ 2.260581] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13  
    [ 2.260624] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14  
    [ 2.275176] Switched to clocksource tsc  
    [ 2.318585] usb 3-2.2: new low-speed USB device number 5 using xhci\_hcd  
    [ 2.405097] usb 3-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes  
    [ 2.405101] usb 3-2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes  
    [ 2.424225] hidraw: raw HID events driver (C) Jiri Kosina  
    [ 2.425680] random: nonblocking pool is initialized  
    [ 2.443232] usbcore: registered new interface driver usbhid  
    [ 2.443234] usbhid: USB HID core driver  
    [ 2.446456] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:046D:C049.0001/input/input15  
    [ 2.446465] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:05AC:0250.0003/input/input16  
    [ 2.446553] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:14.0-1/input0  
    [ 2.446599] vboxguest: PCI device not found, probably running on physical hardware.  
    [ 2.446634] apple 0003:05AC:0250.0003: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-2.2/input0  
    [ 2.446919] hid-generic 0003:046D:C049.0002: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:14.0-1/input1  
    [ 2.447202] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.1/0003:05AC:0250.0004/input/input17  
    [ 2.447301] apple 0003:05AC:0250.0004: input,hidraw3: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-2.2/input1  
    [ 2.449043] usbcore: registered new interface driver snd-usb-audio  
    [ 2.453993] mousedev: PS/2 mouse device common for all mice  
    [ 2.458250] vboxguest: PCI device not found, probably running on physical hardware.  
    [ 2.460873] r8169 0000:03:00.0 enp3s0: link down  
    [ 2.460903] IPv6: ADDRCONF(NETDEV\_UP): enp3s0: link is not ready  
    [ 2.460915] r8169 0000:03:00.0 enp3s0: link down  
    [ 2.473538] vboxdrv: Found 4 processor cores.  
    [ 2.473969] vboxdrv: fAsync=0 offMin=0x23d offMax=0x1540  
    [ 2.474009] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.  
    [ 2.474010] vboxdrv: Successfully loaded version 4.3.18\_OSE (interface 0x001a0008).  
    [ 2.476352] nvidia 0000:01:00.0: irq 31 for MSI/MSI-X  
    [ 2.483702] vboxpci: IOMMU not found (not registered)  
    [ 3.029438] NVRM: Your system is not currently configured to drive a VGA console  
    [ 3.029440] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver  
    [ 3.029441] NVRM: requires the use of a text-mode VGA console. Use of other console  
    [ 3.029442] NVRM: drivers including, but not limited to, vesafb, may result in  
    [ 3.029443] NVRM: corruption and stability problems, and is not supported.  
    [ 4.167017] r8169 0000:03:00.0 enp3s0: link up  
    [ 4.167022] IPv6: ADDRCONF(NETDEV\_CHANGE): enp3s0: link becomes ready  
    [ 203.209268] fuse init (API version 7.23)  
    [ 206.134974] Bluetooth: Core ver 2.19  
    [ 206.134983] NET: Registered protocol family 31  
    [ 206.134984] Bluetooth: HCI device and connection manager initialized  
    [ 206.134989] Bluetooth: HCI socket layer initialized  
    [ 206.134990] Bluetooth: L2CAP socket layer initialized  
    [ 206.134993] Bluetooth: SCO socket layer initialized  
    [ 206.137455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3  
    [ 206.137457] Bluetooth: BNEP filters: protocol multicast  
    [ 206.137460] Bluetooth: BNEP socket layer initialized  
    
    

    In /etc/X11/ is already a xorg.conf.d - should I add it to this file or create another one?

  • Hi,

    Kernel finds your keyboard:

      
    [ 2.446465] input: Apple Inc. Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:05AC:0250.0003/input/input16  
    [ 2.446634] apple 0003:05AC:0250.0003: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:14.0-2.2/input0  
    
    

    xorg.conf.d is a directory, you can create inside a text file (keyboard.conf) with the contents I gave you and restart X

    When you have those lags, it happens also in terminal mode? (To go to terminal, press CTRL+ALT+F2)

    Cheers!

  • @“karasu”:2dlvw5k1 said:

    When you have those lags, it happens also in terminal mode? (To go to terminal, press CTRL+ALT+F2)
    [/quote:2dlvw5k1]

    Uhm, I don’t know. They happen sometimes often, sometimes not within an hour. First I check my system with the new file. ;)

    Why dmesg says, that its “testing” at the fourth line?

  • just got the same error with the new file. :(

  • Hi,

    Sorry to hear that. I’m a bit loss here. Could you try using the linux LTS kernel? This way we can know if your issue it’s kernel related or not.

  • Sure. But how? Never installed a Kernel with Arch (just Manjaro). Is it just pacman -S linux316 ?

  • [command:1i7yi9ai]sudo pacman -Syyu && sudo pacman -S linux-lts[/command:1i7yi9ai]

  • Ah, great. More easy as I thought. :)

    But the new kernel doesn’t show up in GRUB?

  • Ah, yes I’ve been meaning to fix that. Run these commands:[command:1qbmu7hp]sudo chmod -x /etc/grub.d/10_antergos
    sudo chmod +x /etc/grub.d/10_linux
    sudo chmod +x /etc/grub.d/10_archlinux
    sudo grub-mkconfig -o /boot/grub/grub.cfg[/command:1qbmu7hp]

  • LOL?

    chmod: cannot access '/etc/grub.d/10-antergos': No such file or directory
    
  • Sorry my memory was not so good in this case lol. I updated the post with the correct file names.

    Cheers!

  • There is no 10_archlinux

      
    -rwxr-xr-x 1 root root 8875 May 14 08:22 00\_header  
    --w-rw--wT 1 root root 11070 Aug 7 03:43 10\_antergos  
    -rwxr-xr-x 1 root root 9657 May 14 08:22 10\_linux  
    -rwxr-xr-x 1 root root 10250 May 14 08:22 20\_linux\_xen  
    -rwxr-xr-x 1 root root 10883 May 14 08:22 30\_os-prober  
    -rwxr-xr-x 1 root root 214 May 14 08:22 40\_custom  
    -rwxr-xr-x 1 root root 216 May 14 08:22 41\_custom  
    -rwxr-xr-x 1 root root 1219 May 14 08:22 60\_memtest86+  
    -rw-r--r-- 1 root root 483 May 14 08:22 README  
    
    
  • Okay no worries. Did you run the other commands and reboot?

  • Yep. At the advanced Options in Grub there are now linux-lts and linux-linux and their fallbacks.
    But with LTS Kernel the system is incredible slow and laggy. Is there a way just to get the 3.16 Kernel back?

Posts 18Views 1536
Log in to reply