• Problems installing "Antergos 2014.08.07 - 32bits"


    Heyyo,

    As the title says… I can’t regular boot into Antergos 32bit live via USB unless I change the kernel to “Safe Settings” which is odd… Xubuntu 32bit uses kernel 3.11 & nouveau drivers I think to install and it works fine on my machine…

    Out of curiosity? I tried “manjaro-cinnamon-0.8.10-i686” and X server will fail to initialize even with “Safe Settings”… maybe due to 3.16.x and NVIDIA drivers??

    Anywho? it’s really odd to me, it also does give the error… here’s the dmesg

    [ 2.504207] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5  
    [ 2.512225] hub 6-1:1.0: USB hub found  
    [ 2.512276] hub 6-1:1.0: 8 ports detected  
    [ 2.591624] usb 3-1.1: new full-speed USB device number 3 using ehci-pci  
    [ 2.748141] usb 3-1.3: new full-speed USB device number 4 using ehci-pci  
    [ 2.821304] ata4: SATA link down (SStatus 0 SControl 300)  
    [ 2.837269] hidraw: raw HID events driver (C) Jiri Kosina  
    [ 2.840021] usbcore: registered new interface driver usbhid  
    [ 2.840025] usbhid: USB HID core driver  
    [ 2.841828] input: Logitech G400s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C24C.0001/input/input0  
    [ 2.841888] hid-generic 0003:046D:C24C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G400s Optical Gaming Mouse] on usb-0000:00:1a.0-1.3/input0  
    [ 2.842514] hid-generic 0003:046D:C24C.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech G400s Optical Gaming Mouse] on usb-0000:00:1a.0-1.3/input1  
    [ 2.844009] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)  
    [ 2.844044] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)  
    [ 2.844090] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)  
    [ 2.844108] sd 0:0:0:0: [sda] Write Protect is off  
    [ 2.844113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00  
    [ 2.844147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844151] sd 1:0:0:0: [sdb] Write Protect is off  
    [ 2.844155] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00  
    [ 2.844166] sd 2:0:0:0: [sdc] Write Protect is off  
    [ 2.844170] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00  
    [ 2.844186] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844201] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844516] sdb: sdb1  
    [ 2.844794] sd 1:0:0:0: [sdb] Attached SCSI disk  
    [ 2.888830] ldm\_parse\_tocblock(): Cannot find TOCBLOCK, database may be corrupt.  
    [ 2.889533] ldm\_parse\_tocblock(): Cannot find TOCBLOCK, database may be corrupt.  
    [ 2.890663] sdc: sdc1 sdc2 < sdc5 sdc6 \>  
    [ 2.891381] sd 2:0:0:0: [sdc] Attached SCSI disk  
    [ 2.900431] sda: [LDM] sda1  
    [ 2.901005] sd 0:0:0:0: [sda] Attached SCSI disk  
    [ 2.901412] usb 3-1.5: new full-speed USB device number 5 using ehci-pci  
    [ 2.987083] hub 3-1.5:1.0: USB hub found  
    [ 2.987455] hub 3-1.5:1.0: 4 ports detected  
    [ 3.054660] usb 3-1.6: new high-speed USB device number 6 using ehci-pci  
    [ 3.307602] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)  
    [ 3.308124] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100  
    [ 3.308872] ata5.00: configured for UDMA/100  
    [ 3.309807] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5  
    [ 3.330646] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray  
    [ 3.330649] cdrom: Uniform CD-ROM driver Revision: 3.20  
    [ 3.330799] sr 4:0:0:0: Attached scsi CD-ROM sr0  
    [ 3.484795] usb-storage 3-1.6:1.0: USB Mass Storage device detected  
    [ 3.485048] scsi22 : usb-storage 3-1.6:1.0  
    [ 3.485131] usbcore: registered new interface driver usb-storage  
    [ 3.485492] usbcore: registered new interface driver uas  
    [ 3.560878] usb 6-1.7: new high-speed USB device number 3 using ehci-pci  
    [ 3.637258] ata6: SATA link down (SStatus 0 SControl 300)  
    [ 3.637529] scsi 6:0:0:0: Direct-Access ATA KINGSTON SVP200S BBF0 PQ: 0 ANSI: 5  
    [ 3.637990] sd 6:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)  
    
    

    and that’s the only error message I saw… TOCBLOCK, nothing about preventing X from loading without “Safe Settings” for the live image… any ideas why both Antergos and Manjaro are giving me live boot grief with 32bit?

    specs

    [[email protected] ~]$ lspci  
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)  
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)  
    00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)  
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller \#1 (rev 04)  
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller \#2 (rev 05)  
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)  
    00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)  
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)  
    00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)  
    00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)  
    00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)  
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller \#1 (rev 05)  
    00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)  
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)  
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)  
    01:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:02.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:03.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    03:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)  
    03:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)  
    04:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)  
    04:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)  
    05:00.0 Audio device: Creative Labs SB Recon3D (rev 01)  
    06:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)  
    07:00.0 Power PC: Freescale Semiconductor Inc MPC8314E (rev 12)  
    08:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10)  
    0a:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)  
    0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)  
    0c:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo (rev 11)  
    0d:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo (rev 11)  
    
    
  • Heyyo,

    As the title says… I can’t regular boot into Antergos 32bit live via USB unless I change the kernel to “Safe Settings” which is odd… Xubuntu 32bit uses kernel 3.11 & nouveau drivers I think to install and it works fine on my machine…

    Out of curiosity? I tried “manjaro-cinnamon-0.8.10-i686” and X server will fail to initialize even with “Safe Settings”… maybe due to 3.16.x and NVIDIA drivers??

    Anywho? it’s really odd to me, it also does give the error… here’s the dmesg

    [ 2.504207] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5  
    [ 2.512225] hub 6-1:1.0: USB hub found  
    [ 2.512276] hub 6-1:1.0: 8 ports detected  
    [ 2.591624] usb 3-1.1: new full-speed USB device number 3 using ehci-pci  
    [ 2.748141] usb 3-1.3: new full-speed USB device number 4 using ehci-pci  
    [ 2.821304] ata4: SATA link down (SStatus 0 SControl 300)  
    [ 2.837269] hidraw: raw HID events driver (C) Jiri Kosina  
    [ 2.840021] usbcore: registered new interface driver usbhid  
    [ 2.840025] usbhid: USB HID core driver  
    [ 2.841828] input: Logitech G400s Optical Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C24C.0001/input/input0  
    [ 2.841888] hid-generic 0003:046D:C24C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech G400s Optical Gaming Mouse] on usb-0000:00:1a.0-1.3/input0  
    [ 2.842514] hid-generic 0003:046D:C24C.0002: hiddev0,hidraw1: USB HID v1.10 Device [Logitech G400s Optical Gaming Mouse] on usb-0000:00:1a.0-1.3/input1  
    [ 2.844009] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)  
    [ 2.844044] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)  
    [ 2.844090] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)  
    [ 2.844108] sd 0:0:0:0: [sda] Write Protect is off  
    [ 2.844113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00  
    [ 2.844147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844151] sd 1:0:0:0: [sdb] Write Protect is off  
    [ 2.844155] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00  
    [ 2.844166] sd 2:0:0:0: [sdc] Write Protect is off  
    [ 2.844170] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00  
    [ 2.844186] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844201] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA  
    [ 2.844516] sdb: sdb1  
    [ 2.844794] sd 1:0:0:0: [sdb] Attached SCSI disk  
    [ 2.888830] ldm\_parse\_tocblock(): Cannot find TOCBLOCK, database may be corrupt.  
    [ 2.889533] ldm\_parse\_tocblock(): Cannot find TOCBLOCK, database may be corrupt.  
    [ 2.890663] sdc: sdc1 sdc2 < sdc5 sdc6 \>  
    [ 2.891381] sd 2:0:0:0: [sdc] Attached SCSI disk  
    [ 2.900431] sda: [LDM] sda1  
    [ 2.901005] sd 0:0:0:0: [sda] Attached SCSI disk  
    [ 2.901412] usb 3-1.5: new full-speed USB device number 5 using ehci-pci  
    [ 2.987083] hub 3-1.5:1.0: USB hub found  
    [ 2.987455] hub 3-1.5:1.0: 4 ports detected  
    [ 3.054660] usb 3-1.6: new high-speed USB device number 6 using ehci-pci  
    [ 3.307602] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)  
    [ 3.308124] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100  
    [ 3.308872] ata5.00: configured for UDMA/100  
    [ 3.309807] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB03 PQ: 0 ANSI: 5  
    [ 3.330646] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray  
    [ 3.330649] cdrom: Uniform CD-ROM driver Revision: 3.20  
    [ 3.330799] sr 4:0:0:0: Attached scsi CD-ROM sr0  
    [ 3.484795] usb-storage 3-1.6:1.0: USB Mass Storage device detected  
    [ 3.485048] scsi22 : usb-storage 3-1.6:1.0  
    [ 3.485131] usbcore: registered new interface driver usb-storage  
    [ 3.485492] usbcore: registered new interface driver uas  
    [ 3.560878] usb 6-1.7: new high-speed USB device number 3 using ehci-pci  
    [ 3.637258] ata6: SATA link down (SStatus 0 SControl 300)  
    [ 3.637529] scsi 6:0:0:0: Direct-Access ATA KINGSTON SVP200S BBF0 PQ: 0 ANSI: 5  
    [ 3.637990] sd 6:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)  
    
    

    and that’s the only error message I saw… TOCBLOCK, nothing about preventing X from loading without “Safe Settings” for the live image… any ideas why both Antergos and Manjaro are giving me live boot grief with 32bit?

    specs

    [[email protected] ~]$ lspci  
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)  
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)  
    00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)  
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller \#1 (rev 04)  
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller \#2 (rev 05)  
    00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)  
    00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)  
    00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)  
    00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)  
    00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)  
    00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)  
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller \#1 (rev 05)  
    00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)  
    00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)  
    00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)  
    01:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:00.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:02.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    02:03.0 PCI bridge: NVIDIA Corporation NF200 PCIe 2.0 switch (rev a3)  
    03:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)  
    03:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)  
    04:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 680] (rev a1)  
    04:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)  
    05:00.0 Audio device: Creative Labs SB Recon3D (rev 01)  
    06:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)  
    07:00.0 Power PC: Freescale Semiconductor Inc MPC8314E (rev 12)  
    08:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10)  
    0a:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)  
    0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)  
    0c:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo (rev 11)  
    0d:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo (rev 11)  
    
    
  • Hey I am also using 32 bit. Antergos is my main operating system. After i did upgrade i found that it becomes unstable or some programs could not open/work such as Chromium and Amarok. Not only that during my boot session there is a welcome message as “Welcome to Arch Linux” shouldnt it say “Welcome to Antergos”?

    Do i downgrade Antergos again ?? Any suggestions?

    Thanks

    NB: Should i start a separate thread for this?

  • @pahau: Yes, start another thread or your question will go unnoticed.

    @The_MarD: There have been a lot of changes in nouveau drivers and kernel lately. Sometimes changes are not a good thing :p

    Is there any problem installing Antergos in safe mode? I know you’ll have the same problem once installed, but then you could replace nouveau drivers with nvidia ones, couldn’t you?

Posts 4Views 1411
Log in to reply