• Problem with new SSD, system freezes on start Firefox.


    Hi.
    I installed a new SSD. When starting the firefox, the system freeze for about 15 seconds, firefox stops responding for about 15 seconds, the hard disk diode lights up all the time. After this time, everything returns to normal. I didn’t have such problems on my HDD on linux. I don’t have such problems on Windows10 either.0_1543692857410_1.png

  • Is that only in firefox ?

  • Today I found out that I also have these symptoms when working without a firefox. Below are the logs from today:

    10∶52∶16 kernel: audit: type=1131 audit(1543744336.628:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-hostnamed comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
    10∶51∶26 kernel: ata1: EH complete
    10∶51∶26 kernel: print_req_error: I/O error, dev sda, sector 217558656
    10∶51∶26 kernel: sd 0:0:0:0: [sda] tag#14 CDB: Read(10) 28 00 0c f7 ae 80 00 00 80 00
    10∶51∶26 kernel: ata1.00: configured for UDMA/133
    10∶51∶26 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    10∶51∶26 kernel: ata1.00: status: { DRDY }
    10∶51∶26 kernel: ata1: SError: { PHYRdyChg CommWake }
    10∶51∶26 kernel: ata1.00: exception Emask 0x0 SAct 0x7010 SErr 0x50000 action 0x6 frozen
    10∶48∶09 kernel: ata1: EH complete
    10∶48∶09 kernel: ata1.00: device reported invalid CHS sector 0
    10∶48∶09 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    10∶48∶09 kernel: ata1.00: status: { DRDY }
    10∶48∶09 kernel: ata1: SError: { PHYRdyChg CommWake }
    10∶48∶09 kernel: ata1.00: exception Emask 0x0 SAct 0x3c780000 SErr 0x50000 action 0x6 frozen
    10∶24∶14 kernel: ata1: EH complete
    10∶24∶14 kernel: ata1.00: device reported invalid CHS sector 0
    10∶24∶14 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    10∶24∶14 kernel: ata1.00: status: { DRDY }
    10∶24∶14 kernel: ata1: SError: { PHYRdyChg CommWake }
    10∶24∶14 kernel: ata1.00: exception Emask 0x0 SAct 0x3ff8 SErr 0x50000 action 0x6 frozen
    10∶00∶02 kernel: audit: type=1131 audit(1543741202.690:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=NetworkManager-dispatcher comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
    09∶59∶54 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    09∶59∶52 kernel: psmouse serio1: synaptics: queried min coordinates: x [1184…], y [1022…]
    09∶59∶51 kernel: audit: type=1130 audit(1543741191.946:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=NetworkManager-dispatcher comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
    09∶59∶51 kernel: RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
    09∶59∶51 kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    09∶59∶51 kernel: audit: type=1131 audit(1543741191.876:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg=‘unit=systemd-suspend comm=“systemd” exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success’
    09∶59∶51 kernel: PM: suspend exit
    09∶59∶51 kernel: Restarting tasks … done.
    09∶59∶51 kernel: OOM killer enabled.
    09∶59∶51 kernel: usb 3-1.3: reset high-speed USB device number 4 using ehci-pci
    09∶59∶51 kernel: ata1.00: configured for UDMA/133
    09∶59∶51 kernel: ata5.00: configured for UDMA/100
    09∶59∶51 kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    09∶59∶51 kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    09∶59∶51 kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    09∶59∶51 kernel: usb 3-1.1: reset high-speed USB device number 3 using ehci-pci
    09∶59∶51 kernel: ACPI: button: The lid device is not compliant to SW_LID.
    09∶59∶51 kernel: sd 0:0:0:0: [sda] Starting disk
    09∶59∶51 kernel: ACPI: EC: event unblocked
    09∶59∶51 kernel: CPU1 is up
    09∶59∶51 kernel: cache: parent cpu1 should not be sleeping
    09∶59∶51 kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
    09∶59∶51 kernel: x86: Booting SMP configuration:
    09∶59∶51 kernel: Enabling non-boot CPUs …
    09∶59∶51 kernel: PM: Restoring platform NVS memory
    09∶59∶51 kernel: ACPI: EC: EC started
    09∶59∶51 kernel: smpboot: CPU 1 is now offline
    09∶59∶51 kernel: Disabling non-boot CPUs …
    09∶59∶51 kernel: PM: Saving platform NVS memory

  • and what is the Fstab for your ssd ?

  • /etc/fstab: static file system information.

    Use ‘blkid’ to print the universally unique identifier for a

    device; this may be used with UUID= as a more robust way to name devices

    that works even if disks are added and removed. See fstab(5).

    <file system> <mount point> <type> <options> <dump> <pass>

    UUID=b2f3b078-3647-4e72-92a4-66875ad696c5 / ext4 defaults,noatime,discard 0 1

  • @drk001 said in Problem with new SSD, system freezes on start Firefox.:

    print_req_error: I/O error, dev sda, sector // device reported invalid CHS sector 0

    But Windows is not on the new installed SSD?

    Looks like a failing disk, but can be also a defect cable or sata-connector…

  • This post is deleted!
  • @drk001 can you show the output of (from a terminal)

    LANG=C sudo lsblk -o NAME,FSTYPE,RO,RM,SIZE,STATE,OWNER,GROUP,MODE,TYPE,MOUNTPOINT,LABEL,MODEL
    
  • NAME FSTYPE RO RM   SIZE STATE OWNER GROUP MODE       TYPE MOUNTPOINT LABEL MODEL
    sda          0  0 111.8G runni             brw-rw---- disk                  CT120
    |-sda1
    |    ntfs    0  0  35.1G                   brw-rw---- part                  
    |-sda2
    |            0  0     1K                   brw-rw---- part                  
    |-sda5
    |    ntfs    0  0    62G                   brw-rw---- part                  
    |-sda6
    |    ext4    0  0  14.7G                   brw-rw---- part /                
    |sr0         0  1  1024M runni             brw-rw---- rom                   PLDS_
    

    edit: corrected code tags

  • @joekamprad yeah once i got a boot issue with antergos, i took the cable of my cdrom after it seemed fine…

    but is strange it do only firefox, you can try to remove your firefox profile

    https://askubuntu.com/questions/1058130/why-does-firefox-freeze-and-stop-my-computer

  • Unfortunately, the problem still exists even on a clean Firefox profile. A moment ago I was doing import bookmarks from .html backup to fresh firefox system again had a freeze.

  • @drk001 looks strange to me…

    sda1 = windows
    sda2 = extended partition
    sda5 = ntfs data
    sda6 = antergos

    so you choose to do not create swap on install?
    usually extended partition only takes one number of from device numbers but at yours 3+4 are missing…

    So can be also some issue with partiton …

  • The disk size for Antergos may be too small.
    Could you show the output of commands

    df -hT
    sudo fdisk -l
    
  • This post is deleted!
  • [[email protected] ~]$ df -hT
    System plików Typ rozm. użyte dost. %uż. zamont. na
    dev devtmpfs 1,8G 0 1,8G 0% /dev
    run tmpfs 1,8G 1,2M 1,8G 1% /run
    /dev/sda6 ext4 15G 5,0G 9,3G 36% /
    tmpfs tmpfs 1,8G 33M 1,7G 2% /dev/shm
    tmpfs tmpfs 1,8G 0 1,8G 0% /sys/fs/cgroup
    tmpfs tmpfs 1,8G 35M 1,7G 2% /tmp
    tmpfs tmpfs 353M 12K 353M 1% /run/user/1000
    /dev/sda1 fuseblk 36G 14G 22G 39% /run/media/drk001/5064730F393E6F8C
    /dev/sda5 fuseblk 62G 20G 43G 32% /run/media/drk001/3B16143C3B838676
    [[email protected] ~]$ sudo fdisk -l
    [sudo] hasło użytkownika drk001:
    Dysk /dev/sda: 111,8 GiB, bajtów: 120034123776, sektorów: 234441648
    Model dysku: CT120BX300SSD1
    Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
    Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 4096
    Rozmiar we/wy (minimalny/optymalny) w bajtach: 4096 / 4096
    Typ etykiety dysku: dos
    Identyfikator dysku: 0x9d18259e

    Urządzenie Rozruch Początek Koniec Sektory Rozmiar Id Typ
    /dev/sda1 * 2048 73521151 73519104 35,1G 7 HPFS/NTFS/exFAT
    /dev/sda2 73523198 234440703 160917506 76,7G 5 Rozszerzona
    /dev/sda5 73523200 203546623 130023424 62G 7 HPFS/NTFS/exFAT
    /dev/sda6 * 203548672 234440703 30892032 14,7G 83 Linux

    Partition 2 does not start at the border of the physical sector.

  • @drk001
    Small RAM and small disk space may cause slowness or freezing.

    I guess the problem may be caused by the small tmpfs partition /tmp. It is only 1,8GB. That means your machine’s RAM is about 4GB, right?

    You could try disabling automatic mount of /tmp:
    https://wiki.archlinux.org/index.php/Tmpfs#Disable_automatic_mount

    That would make more room for /tmp, and also release some RAM for other tasks.

  • Right. My laptop has 4GB RAM. I will try your solution. Thank you.

  • @drk001
    Any reports? :)

system127 firefox38 ssd27 freezes24 Posts 18Views 236
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.