• No Ethernet


    I installed yesterday Antergos. Everything installed fine but today i dont have internet with Ethernet cable. I have Realtek R8168 controller. Is there some drivers to install or anything else to do?

  • look at https://www.unixblogger.com/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/ for a bit for that blacklisting r8169 you probably need the r8168 from the remo for lts kernel r8168-lts ,

    https://wiki.archlinux.org/index.php/Network_configuration#Realtek_RTL8111.2F8168B

    avoid conflict with 8169 blacklist the r8169

  • If i get it right. I must install the driver from pacman and then i must blacklist the other driver. Exactly how to do the blacklist?

  • as example :

    [email protected]:~$ sudo sh -c 'echo blacklist r8169 >> /etc/modprobe.d/blacklist.conf'
    

    dont know exactly but this could be a good shot. 8169 does not like 8168 anyway.

  • @andreasdimo79 I had faced similar problem when getting my wifi connections.

    I used rmmod to remove unwanted kernel modules and used modprobe to load the required ones. Like modprobe wl . Hope this was helpful.

  • I have installed the r8168 drivers and blacklisted the r8169 but after a couple of reboots still the same, the ethernet connection does not work

  • @andreasdimo79 said in No Ethernet:

    Realtek R8168

    what is your hardware specification , Board / brand ?

  • @ringo32 how can i see that?

  • or tell what kinda computer you have ?

  • Is there some kind of command to show you the result?

  • if you have inxi, if not install from aur. i think if repo got non.

    inxi -F
    
  • @ringo32 i dont have internet!

  • can you try attach your phone if you have wifi general, so you can have internet temp by your phone ?
    make sure you can use wifi offcourse if you have arround.

  • is just dont want to guess… i saw a post on a forum and wiki also told about iommo, but im not sure :)

    thats why i ask your machine brand we can search up atleast not about the chip.

    https://wiki.archlinux.org/index.php/Network_configuration#Gigabyte_Motherboard_with_Realtek_8111.2F8168.2F8411

    but is just a gues on some point…

  • @ringo32 System: Host: AndreasDimo Kernel: 4.14.79-1-lts x86_64 bits: 64 Desktop: KDE Plasma 5.14.3
    Distro: Antergos Linux 18.10-ISO-Rolling
    Machine: Type: Desktop System: ASUS product: All Series v: N/A serial: <root required>
    Mobo: ASUSTeK model: H81M-C v: Rev X.0x serial: <root required> BIOS: American Megatrends v: 2106
    date: 08/21/2014
    CPU: Topology: Dual Core model: Intel Pentium G3420 bits: 64 type: MCP L2 cache: 3072 KiB
    Speed: 3193 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 3193 2: 3193
    Graphics: Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics driver: i915 v: kernel
    Display: x11 server: X.Org 1.20.3 driver: intel unloaded: fbdev,modesetting,vesa
    resolution: 1920x1080~60Hz
    Message: Unable to show advanced data. Required tool glxinfo missing.
    Audio: Device-1: Intel 8 Series/C220 Series High Definition Audio driver: snd_hda_intel
    Sound Server: ALSA v: k4.14.79-1-lts
    Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
    IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: 38:2c:4a:b4:83:8b
    Drives: Local Storage: total: 629.73 GiB used: 6.69 GiB (1.1%)
    ID-1: /dev/sda vendor: Seagate model: ST500DM002-1BD142 size: 465.76 GiB
    ID-2: /dev/sdb vendor: Western Digital model: WD1600JS-00MHB0 size: 149.05 GiB
    ID-3: /dev/sdc type: USB vendor: Lexar model: USB Flash Drive size: 14.91 GiB
    Partition: ID-1: / size: 19.56 GiB used: 6.45 GiB (33.0%) fs: ext4 dev: /dev/sda5
    ID-2: /home size: 168.98 GiB used: 245.0 MiB (0.1%) fs: ext4 dev: /dev/sda2
    ID-3: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda6
    Sensors: System Temperatures: cpu: 29.8 C mobo: 27.8 C
    Fan Speeds (RPM): cpu: 0
    Info: Processes: 154 Uptime: 2m Memory: 3.73 GiB used: 944.2 MiB (24.7%) Shell: bash inxi: 3.0.26

  • @andreasdimo79 said in No Ethernet:

    Realtek RTL8111/8168/8411

    yeah it looks like https://bbs.archlinux.org/viewtopic.php?id=195251 , also asustek board…

    systemd status dhcpcd is enabled, by installing seems you have betwork but not aftr installed correct like the guy on his issue?

  • @ringo32 So what i have to do?

  • is dhcpcd enabled ? systemctl status dhcpcd ?

  • @ringo32 dhcpcd.service - dhcpcd on all interfaces
    Loaded: loaded (/usr/lib/systemd/system/dhcpcd.service; disabled; vendor preset: disabled)
    Active: inactive (dead)

  • try to enable it, sudo systemctl enable dhcpcd
    then sudo systemctl start dhcpcd

    and look if it something changed?

ethernet15 Posts 52Views 474
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.