• Installing Printer MFC-J6930DW


    Hi to all -

    1. I did download the appropriate File from AUR
    2. I did the “makepkg”
    3. The problem lays in this last step for the installation, where the system does not accept the file name.
      .
      Below the whole terminal-story in German.
      Do you know what shall give in exactly that the system accepts/finds the package for the installation? Thanks.

    [[email protected] ~]$ cd Downloads/Printer
    bash: cd: Downloads/Printer: Datei oder Verzeichnis nicht gefunden
    [[email protected] ~]$ cd Downloads/P1
    [[email protected] P1]$ tar xzf aur-brother-mfc-j6930dw.tar.gz
    [[email protected] P1]$ ls
    aur-brother-mfc-j6930dw aur-brother-mfc-j6930dw.tar.gz
    [[email protected] P1]$ cd aur-brother-mfc-j6930dw
    [[email protected] aur-brother-mfc-j6930dw]$ ls
    PKGBUILD
    [[email protected] aur-brother-mfc-j6930dw]$ clear
    [[email protected] aur-brother-mfc-j6930dw]$ makepkg -s
    ==> Erstelle Paket: brother-mfc-j6930dw 1.0.1-2 (Mi 13 Jun 2018 13:01:52 CEST)
    ==> Prüfe Laufzeit-Abhängigkeiten…
    ==> Prüfe Buildtime-Abhängigkeiten…
    ==> Empfange Quellen…
    -> Lade mfcj6930dwlpr-1.0.1-0.i386.rpm herunter…
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 2856k 100 2856k 0 0 5349k 0 --:–:-- --:–:-- --:–:-- 5359k
    -> Lade mfcj6930dwcupswrapper-1.0.1-0.i386.rpm herunter…
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 17299 100 17299 0 0 51485 0 --:–:-- --:–:-- --:–:-- 51332
    ==> Überprüfe source Dateien mit md5sums…
    mfcj6930dwlpr-1.0.1-0.i386.rpm … Durchgelaufen
    mfcj6930dwcupswrapper-1.0.1-0.i386.rpm … Durchgelaufen
    ==> Entpacke Quellen…
    -> Entpacke mfcj6930dwlpr-1.0.1-0.i386.rpm mit bsdtar
    -> Entpacke mfcj6930dwcupswrapper-1.0.1-0.i386.rpm mit bsdtar
    ==> Betrete fakeroot Umgebung…
    ==> Beginne package()…
    ==> Säubere Installation…
    -> Entferne libtool Dateien…
    -> Bereinige ungewollte Dateien…
    -> Entferne statische Bibliotheken…
    -> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken…
    -> Komprimiere Man-Pages und Info-Seiten…
    ==> Checking for packaging issues…
    ==> Erstelle Paket “brother-mfc-j6930dw”…
    -> Erstelle .PKGINFO Datei…
    -> Erstelle .BUILDINFO Datei…
    -> Erstelle .MTREE-Datei…
    -> Komprimiere Paket…
    ==> Verlasse fakeroot Umgebung.
    ==> Beendete Erstellung: brother-mfc-j6930dw 1.0.1-2 (Mi 13 Jun 2018 13:01:54 CEST)
    [[email protected] aur-brother-mfc-j6930dw]$ ls
    brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar mfcj6930dwlpr-1.0.1-0.i386.rpm PKGBUILD
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar.xz
    [sudo] Passwort für motogpl:
    Fehler: Keine Operation angegeben (benutzen Sie -h für Hilfe)
    [[email protected] aur-brother-mfc-j6930dw]$ -h
    bash: -h: Kommando nicht gefunden.
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar.xz
    [sudo] Passwort für motogpl:
    Fehler: Keine Operation angegeben (benutzen Sie -h für Hilfe)
    [[email protected] aur-brother-mfc-j6930dw]$ ^C
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman -U mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar.xz
    [sudo] Passwort für motogpl:
    Lade Pakete…
    Fehler: ‘mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar.xz’: Konnte Paket nicht finden oder lesen
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman -U brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar.xz
    Lade Pakete…
    Fehler: ‘brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar.xz’: Konnte Paket nicht finden oder lesen
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman -U mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar .xz
    Lade Pakete…
    Fehler: ‘mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar’: Konnte Paket nicht finden oder lesen
    Fehler: ‘.xz’: Konnte Paket nicht finden oder lesen
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman -U mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar.xz
    Lade Pakete…
    Fehler: ‘mfcj6930dwlpr-1.0.1-0.i386.rpm.pkg.tar.xz’: Konnte Paket nicht finden oder lesen
    [[email protected] aur-brother-mfc-j6930dw]$ sudo pacman -U aur-brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar.xz
    Lade Pakete…
    Fehler: ‘aur-brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar.xz’: Konnte Paket nicht finden oder lesen
    [[email protected] aur-brother-mfc-j6930dw]$ ^C
    [[email protected] aur-brother-mfc-j6930dw]$

  • @lamda-delta said in Installing Printer MFC-J6930DW:

    [[email protected] aur-brother-mfc-j6930dw]$ ls
    brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar mfcj6930dwlpr-1.0.1-0.i386.rpm PKGBUILD

    ergo: sudo pacman -U brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar

    But you can install AUR BUILD also with the package manager, you need only to enable it inside settings of pamac!

    |>> habe deinen Post verschobe, war im falschen Bereich 😉 <<|

    [updates once a week] = [90% less problems]
    antergos:_rescue
    how to add system logs:
    wget http://bit.ly/2GCG9k2 && sh 2GCG9k2
    :handshake: donate antergos

  • Hi joekamprad,

    It s okay with the moving over 🙂

    Yes, it worked Thanks 🙂

    The guy in youtube said always "make sure that it ends with pkg.tar.xz

    That 's why the long hours

    Thanks again for your fast help - The terminal accepted it now - So I will see later, if I can print - I think I might come back
    Best Regards,

  • @joekamprad

    Quote+
    But you can install AUR BUILD also with the package manager, you need only to enable it inside settings of pamac!++

    What are the steps for this, please?
    Thanks.

  • @lamda-delta I would use yaourt -S [name-of-printer] i did that and it ran automatically (the CUPS driver and everything), etc.

    If you pretend to be someone else? Who will be you?

  • @starrider

    Thanks for this

  • @lamda-delta said in Installing Printer MFC-J6930DW:

    What are the steps for this, please?

    0_1528895161457_enabling-aur.png

    Start pamac-manager e.g. from terminal and select Preferences.

    Please report issues including all details! ;-)
    Show files here: cat "file" | curl -F [email protected] https://ptpb.pw/?u=1
    and show the URL.

  • Thank you too Manuel…

  • So meanwhile I installed the Printer and it printers.

    Although it does not accept the command from Antergos to print with colors or without.
    But this is a minor problem.
    Thanks to all again.

  • @lamda-delta
    If you feel this issue is solved, could you please mark it as such? There’s a button for that here.

    And if you wish to continue with a related issue, simply add a link to this thread on a new thread as for reference.

    Please report issues including all details! ;-)
    Show files here: cat "file" | curl -F [email protected] https://ptpb.pw/?u=1
    and show the URL.

  • @lamda-delta which one works… Please mark that one as the correct answer

    If you pretend to be someone else? Who will be you?

  • In my case - how I the topic started - The below was the searching answer…

    joekamprad said in Installing Printer MFC-J6930DW:

    @lamda-delta said in Installing Printer MFC-J6930DW:

    [[email protected] aur-brother-mfc-j6930dw]$ ls
    brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar mfcj6930dwlpr-1.0.1-0.i386.rpm PKGBUILD

    ergo: sudo pacman -U brother-mfc-j6930dw-1.0.1-2-x86_64.pkg.tar

    But you can install AUR BUILD also with the package manager, you need only to enable it inside settings of pamac!

    |>> habe deinen Post verschobe, war im falschen Bereich 😉 <<|

  • Ha ha too much for such a simple issue 😚😂
    @lamda-delta if you like you have the possibility to mark a post as the correct answer, and flag the thread as solved …
    But we do not have any rules on that…

    https://antergos.com/wiki/uncategorized/howto-forum-post-editor/

    [updates once a week] = [90% less problems]
    antergos:_rescue
    how to add system logs:
    wget http://bit.ly/2GCG9k2 && sh 2GCG9k2
    :handshake: donate antergos

  • @joekamprad said in Installing Printer MFC-J6930DW:

    Ha ha too much for such a simple issue 😚😂

    For you yes… 🙂

    I read around in the net about installing a printer (brother) - there are people …, which are trying for weeks…till their brother prints… 🙂

installing95 printer41 mfc-j6930dw1 Posts 14Views 89
Log in to reply
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.