Technical Issues and Assistance

Got a question? Ask our community!


Issues related to Antergos installation.
Trouble finding windows
G

SO, I was away from Linux for a couple of years and many things seem to have changed and I’m having trouble setting up my system. I had windows installed and then put Antergos on the SSD. After installing I changed the BIOS (?) settings to disable secure boot and changed the bootloader order and managed to boot into Antergos. The problem is that os-prober (and hence grub-mkconfig) can’t seem to find windows. I suspect the issue is all this new EUFI/BIOS/whatever mess. I also tried to boot into windows by loading the windows bootloader from BIOS, but that doesn’t seem to work either. I’m a bit confused about how to determine if I installed Antergos with the wrong type of firmware mode or something. Could any kind soul give me a hand on troubleshooting this?

fdisk -l

Disk /dev/sda: 119.25 GiB, 128035676160 bytes, 250069680 sectors
Disk model: SAMSUNG MZNLF128
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: B25D8349-E4C1-4335-B5CF-F883169CA237

Device Start End Sectors Size Type
/dev/sda1 2048 534527 532480 260M EFI System
/dev/sda2 534528 567295 32768 16M Microsoft reserved
/dev/sda3 567296 203069439 202502144 96.6G Microsoft basic data
/dev/sda4 203069440 250069646 47000207 22.4G Linux filesystem

ALso tried adding a custom grub entry in /etc/grub.d/40_custom

menuentry "Windows " {
insmod part_msdos
insmod ntfs
set root=‘hd0,3’
search --no-floppy --fs-uuid --set=3ABA9DBABA9D72DD
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}

but when I try to boot, it throws an error saying it can’t find ntldr

read more

Beginners’ subforum for general Antergos issues.

grub: unknown filesystem after Windows partitioning
R

@Deditionis Yes os-prober does see the file in the EFI partition. Are you sure you have secure boot disabled, and fast boot disabled in the Uefi Bios. The other thing is if you can get into Windows 10 make sure that the fast start up feature is turned off. This is different than the fast boot in the Uefi Bios. Both need to be off. The fast start up feature in Windows 10 is under power options. It creates hiber-file for fast start up on Windows 10 but is a problem for dual boot. Then i would try to reinstall grub again after you check these and make sure they are off(Disabled).

read more

Post your workstation, desktop, WM/DE issues and questions here.

Keyboard and touchpad don't work on boot/reboot
A

I apologize for not replying earlier. As long as I didn’t power off/on my laptop, I didn’t face this issue. When I power my laptop off then on, the keyboard/touchpad doesn’t work on login screen. I would have to connect a USB keyboard and mouse, login (still internal keyboard/touchpad wouldn’t work after login), suspend my laptop, then wakeup, that’s how I get my laptop’s internal keyboard and touchpad to work again. After that, as long as I don’t power off my laptop I’m fine (even a reboot is fine).

I just powered on my laptop (sure enough, no internal keyboard/touchpad working), connected external keyboard and mouse, and wrote this reply before doing the suspend/wakeup juggle. Here are the logs

https://pastebin.com/LgB0uSc0

I tried switching lighdm greeter from webkit2 to gnome, tried switching from lightdm to gdm. None of that worked.

read more

Issues related to Audio/Video/Image playback/editing, and gaming.

Error FOG II on Steam with Proton
S

That works. Thanks.
http://rolltheball.co/

read more
Issues related to package upgrades. Also the place for discussion about pacman in general.
Removing packages on my system from Live medium
Z

As I can’t correct my text because of the excellent working spam detector:

The chroot part (2.) must be
“chroot /mnt /bin/bash”

read more
Problems and questions concerning kernel and hardware support.
Brother Printer Customer Service telephone number
B

Repair Brother Model Problems and Troubleshooting Hints by Good friend wireless model technical support and customer service group. Dial the 24*7 toll-free online chat Brother Customer service Helpline Contact number for immediate help.

read more

About Antergos

Distribution related information and discussion.


News, Package & Security Advisories, and other important information from the development team.
EndeavourOS............ Newsupdate.

We need support for the development of the EndeavorOS installer.
Therefore, we would be glad if those of you who are familiar with python bash linux archlinux help to speed up the work on the installer itself (Calamares CNCHI / FENIX) and the LiveISO itself.

We have found that the amount of work can not be done by us alone and there is a need to cope with tasks in the field of the organization that require some time and effort so that @Bryanpwo and me ( @joekamprad ) are not really available for all the development itself.

If you want to help on EndeavourOS development of the first release and may upcoming releases simple join at GitLab:

https://gitlab.com/endeavouros-iso

Get knowledge about what needs to be done:
https://gitlab.com/endeavouros-iso/offline-installer-iso/wikis/home

or contact us over chat here or at telegram:
https://t.me/Endeavouros

–> usernames at telegram: [@joekamprad] [@bryanpwo]

read more

Discuss antergos code here.

I would like to help you, but I can not.

@judd !!!
I am so so so sorry the hear this. My warmest condolences, keep strong &…hey, DO NOT FORGET this
(I will be expecting you around).
https://www.youtube.com/watch?v=3DXyRsOQ9Is

read more
Issues regarding the forums
Cannot delete my forum account

Please contact antergos development: [email protected]

read more
No decsciption available
Installing from Antergos iso after project ends
L

@Firespray If you are trying to install the entire system from scratch, when the live disc mounts, go into the programs and find GParted. Run that and reformat all of the drives on your computer. Then install. In my experience the Cnchi installer will then work perfectly.

If I misunderstood you and you are trying to install only part of Antergos from the disc, then I apologize for this post.

read more

Contributions & Discussion

The place to talk about Antergos and share content, tips, and advice.


Post here if you’d like to say hello.

Just Signed Up
R

@EarthMind Welcome … and this is interesting. Bit Rot? You say i got Bit Rot?
Is this your first time using Antergos? What desktop did you install with BTRFS?
Cool!

read more
Discuss GNU/Linux related topics that don't quite fit into other forum categories.
Arch forum register question

@louielinux done it from a real archlinux installation? They love to be nerdy like this, as philo is to get knowledged by doing it the archway. And also archlinux forum offers help only fir pure archsystems, not for distros based on it.

read more
Post your screenshots. Contribute or share new logos, icons, themes, wallpapers and other artwork here.
Show your desktop
R

@piotr Thanks…that would be awesome. Maybe it will be the new trend. I know a lot of people like i3 window manager and this just takes it to another level.

read more
Not Antergos or GNU/Linux-related? Talk about it here!
How to run Mozilla Firefox without add ons
J

Mozilla Firefox-Run It without Add-Ons
Mozilla Firefox might be easy for the users to access, but it doesn’t means that can be free from the technical errors. It is the most dominant and old standard browser. It is self explanatory and even easy to browse. It is quite perfect according to the needs of consumers, but user may have to face certain technical flaws. To ignore all such difficulties, individual should connect with customer support team immediately. Technical team could be contacted easily by using the customer service number.

Issues associated with Mozilla Firefox:-
• Why pop- up blocker is not working in Mozilla Firefox?
• How to remove caches from Mozilla Firefox?
• How to delete history from Mozilla Firefox?
• How may I backup bookmarks and password in Mozilla Firefox?
• Is it possible to reinstall Mozilla Firefox in Windows 7?
• Why the Mozilla Firefox browser is taking too long to open?
• How to set homepage in Mozilla Firefox?
• How to change settings in Mozilla Firefox?
Visit: How to Set Homepage on Firefox

read more

Antergos in other languages

If English isn't your first language or you just prefer communicating in another language this area is for you!


Here you can talk catalan (Just general questions please. For specific matters use the correct forum)
libical2 i AUR

@fernandomaroto Sí, sí, sí, això ha funcionat. Després de desinstal·lar libical2 i actualitzar (sudo pacman -Syu), ha instal·lat libcal i s’ha possat a compilar kdelibpim4.
Més de sis hores en funcionament i sense problemes.
Molt agraït.

Sim, sim, sim, isso funcionou. Depois de desinstalar libical2 e atualizar (sudo pacman -Syu), ele instalou libcal e foi compilado kdelibpim4.
Mais de seis horas em operação e sem problemas.
Muito grato

traduït del Català al Portuguès per Google Translate

read more

Here you can talk Dutch (Just general questions please. For specific matters use the correct forum)

Hoest gesteld ..

Mej de nederlandstalige nu anno … vandaag ? :)

read more
Here you can talk French (Just general questions please. For specific matters use the correct forum)
installation de conky lua sous antergos
R

@joekamprad
salut merci de votre reponse …j ai arrivè a activer AURet j ai trouvè mon conky LUA .
MERCI

read more
Here you can talk german (Just general questions please. For specific matters use the correct forum)
"Antergos-keyring" installation Error

Hallo Wigbert

Probier’s mal mit:
sudo pacman-key --refresh-keys
sudo pacman -Sy antergos-keyring

Und dann erneut “pacman -Syu” und “fingers crossed” ;-)

Viel Erfolg!
Roman

read more
Here you can talk hungarian (Just general questions please. For specific matters use the correct forum)
Understand and Troubleshoot AOL Gold Login Errors
V

An AOL Gold login error means that you will not be able to access your AOL account or enjoy any of the features of Install AOL Desktop Gold. Here are some troubleshooting steps you can try to resolve the login errors:
• Delete any corrupted files from AOL Desktop Gold
• Restore your Windows system settings
• Close all background apps and clear space on the RAM
• Visit the AOL website and to install AOL Desktop Gold along with the latest software updates
If you are still unable to login to AOL Desktop Gold then you should contact customer support to make sure your account is not compromised.
More Read: https://www.customersupporthelpline.com/download-aol-gold-software/

read more
Here you can talk polish(Just general questions please. For specific matters use the correct forum)
Nieznany powód padnięcia systemu.

Ja też mam problemy z systemem, jakiś haker włamuje mi się ciągle do sieci, rozsyła mojej rodzinie fałszywe linki javascript, aby inwigilować naszą sieć. Wszędzie się loguje za mną tam gdzie ja, używając umyślnie mojego imienia, moich nicków z innych stron, aby tak mi dokuczać i uprawia w ten sposób stalking. W ogóle nie boi się policji. Jest za jakimś proxy lub vpn i czuje się bezkarny, spędziłem miesiące aby go dopaść na razie wiem tyle, że jego prawdziwy nick to LordSpamer, imię to Jacek lub Tomek, szlaja się po wykop i interi, czateri. Lubi nadużywać wykrzykników w swoim pisaniu…!!. , chyba jest z okolic Wrocławia lub Krakowa. Na co dzień prawdopodobnie zajmuje się spamowaniem różnych forum i w ten sposób zarabia. Także może i tobie on popsuł system.

read more
Here you can talk russian (Just general questions please. For specific matters use the correct forum)
Какие настройки произведены разработчиком Antergos для pamac-aur???
V

Здравствуйте!
Меня интересует, какие настройки произведены разработчиком Antergos для pamac-aur, так как сборка пакетов из AUR ИМЕННО в Antergos производится в РАЗЫ быстрее, чем на ЛЮБОМ другом арч-линуксе.
Например:
Google Chrome собирается в pamac-aur Antergos за 30 секунд против 3-х минут на других арч-дистрах.
PhpStorm собирается в pamac-aur Antergos за 3 минуты против 15-ти минут на других арч-дистрах.
Буду признателен за какой-то небольшой и понятный мануал.
Спасибо.

read more
Here you can talk spanish (Just general questions please. For specific matters use the correct forum)
Endeavour como sucesor de antergos

@javier

Las versiones Beta están destinadas solo para pruebas. Contienen errores y pueden conducir a la pérdida de datos. Para utilizarlo como sistema, debe esperar la primera versión estable.

read more
Here you can talk ukrainian (Just general questions please. For specific matters use the correct forum)
Antergos це добре.

нам потрібно більше змісту тут

read more

Here you can talk Greek (Just general questions please. For specific matters use the correct forum)

Ελληνικά αποσιωπητικά ;

@czam Εντάξει το βρήκα

read more

Here you can talk Portuguese (Just general questions please. For specific matters use the correct forum)

Fórum em português para Antergos!

Boa a todos!

+1 Antergos, via Brasil :D

Abs

read more

137
Online

12.1k
Users

11.4k
Topics

89.4k
Posts

section-header

Divi Leads Split Testing

Build landing pages that convert.

Download Divi Today

Recent Posts
  • @louielinux done it from a real archlinux installation? They love to be nerdy like this, as philo is to get knowledged by doing it the archway. And also archlinux forum offers help only fir pure archsystems, not for distros based on it.

    read more
  • @javier

    Las versiones Beta están destinadas solo para pruebas. Contienen errores y pueden conducir a la pérdida de datos. Para utilizarlo como sistema, debe esperar la primera versión estable.

    read more
  • B

    Repair Brother Model Problems and Troubleshooting Hints by Good friend wireless model technical support and customer service group. Dial the 24*7 toll-free online chat Brother Customer service Helpline Contact number for immediate help.

    read more
  • J

    ¿Desde las versiones beta se puede pasar a la versión final, o hay que reinstalar el sistema?

    read more
  • R

    @Deditionis Yes os-prober does see the file in the EFI partition. Are you sure you have secure boot disabled, and fast boot disabled in the Uefi Bios. The other thing is if you can get into Windows 10 make sure that the fast start up feature is turned off. This is different than the fast boot in the Uefi Bios. Both need to be off. The fast start up feature in Windows 10 is under power options. It creates hiber-file for fast start up on Windows 10 but is a problem for dual boot. Then i would try to reinstall grub again after you check these and make sure they are off(Disabled).

    read more
Monarch Social Sharing Plugin

Participants

Welcome to the Antergos Community!

section-header

Divi Leads Split Testing

Build landing pages that convert.

Download Divi Today

Monarch Social Sharing Plugin
Bloom Email Optin Plugin

Looks like your connection to Antergos Community Forum was lost, please wait while we try to reconnect.